How to convert UTC to Australian Eastern Daylight Time (AEDT)? [duplicate]
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}
This question already has an answer here:
TimeZoneInfo.ConvertTime from PST to UTC to AEST - off by one hour
1 answer
We are downloading data from our trading partner's API. Till now we were working with "E. Australia Standard Time" and it was working fine.
After daylight saving started our trading partner said that they are working with "Australian Eastern Daylight Time (AEDT)".
I have used following code to convert from UTC to "E. Australia Standard Time".
DateTime utcTime = DateTime.UtcNow;
TimeZoneInfo objTimeZoneInfo = TimeZoneInfo.FindSystemTimeZoneById("E. Australia Standard Time");
DateTime TPDateTime = TimeZoneInfo.ConvertTimeFromUtc(utcTime, objTimeZoneInfo);
But I am getting following errors when I use "E. Australia Daylight Time" or "Australian Eastern Daylight Time (AEDT)"
The time zone ID 'E. Australia Daylight Time' was not found on the local computer.
The time zone ID 'Australian Eastern Daylight Time (AEDT)' was not found on the local computer.
What timezone id should I pass to FindSystemTimeZoneById() method to convert correctly to Australian Eastern Daylight Time (AEDT)?
c# timezone timezone-offset
asked Nov 22 '18 at 15:34
YashYash
9112
marked as duplicate by Panagiotis Kanavos c#
Users with the c# badge can single-handedly close c# questions as duplicates and reopen them as needed.
StackExchange.ready(function() {
if (StackExchange.options.isMobile) return;
$('.dupe-hammer-message-hover:not(.hover-bound)').each(function() {
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');
$hover.hover(
function() {
$hover.showInfoMessage('', {
messageElement: $msg.clone().show(),
transient: false,
position: { my: 'bottom left', at: 'top center', offsetTop: -7 },
dismissable: false,
relativeToBody: true
});
},
function() {
StackExchange.helpers.removeMessages();
}
);
});
});
Nov 22 '18 at 15:52
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
|
show 7 more comments
This question already has an answer here:
TimeZoneInfo.ConvertTime from PST to UTC to AEST - off by one hour
1 answer
We are downloading data from our trading partner's API. Till now we were working with "E. Australia Standard Time" and it was working fine.
After daylight saving started our trading partner said that they are working with "Australian Eastern Daylight Time (AEDT)".
I have used following code to convert from UTC to "E. Australia Standard Time".
DateTime utcTime = DateTime.UtcNow;
TimeZoneInfo objTimeZoneInfo = TimeZoneInfo.FindSystemTimeZoneById("E. Australia Standard Time");
DateTime TPDateTime = TimeZoneInfo.ConvertTimeFromUtc(utcTime, objTimeZoneInfo);
But I am getting following errors when I use "E. Australia Daylight Time" or "Australian Eastern Daylight Time (AEDT)"
The time zone ID 'E. Australia Daylight Time' was not found on the local computer.
The time zone ID 'Australian Eastern Daylight Time (AEDT)' was not found on the local computer.
What timezone id should I pass to FindSystemTimeZoneById() method to convert correctly to Australian Eastern Daylight Time (AEDT)?
c# timezone timezone-offset
asked Nov 22 '18 at 15:34
YashYash
9112
marked as duplicate by Panagiotis Kanavos c#
Users with the c# badge can single-handedly close c# questions as duplicates and reopen them as needed.
StackExchange.ready(function() {
if (StackExchange.options.isMobile) return;
$('.dupe-hammer-message-hover:not(.hover-bound)').each(function() {
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');
$hover.hover(
function() {
$hover.showInfoMessage('', {
messageElement: $msg.clone().show(),
transient: false,
position: { my: 'bottom left', at: 'top center', offsetTop: -7 },
dismissable: false,
relativeToBody: true
});
},
function() {
StackExchange.helpers.removeMessages();
}
);
});
});
Nov 22 '18 at 15:52
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
2
Well, your first one has a typo. Daylingh? I don't know if it will work any better correct, of course.
– John
Nov 22 '18 at 15:35
2
You can't use a non-existent timezone. Timezones do not refer to winter or summer time. The same timezone has rules that controll its offset during winter or summer.
– Panagiotis Kanavos
Nov 22 '18 at 15:39
1
Why the question? Are you getting the wrong time with"E. Australia Standard Time"?
– Panagiotis Kanavos
Nov 22 '18 at 15:41
2
@Yash btw if you really care about timezones use the NodaTime library and the IANA timezone names.Australia/Melbourneis a lot clearer than Windows timezone names. The IANA timezone database and names have become the de-facto standard
– Panagiotis Kanavos
Nov 22 '18 at 15:49
2
Follow the accepted answer of the below link: TimeZoneInfo.ConvertTime from PST to UTC to AEST
– Ali Azam
Nov 22 '18 at 15:51
|
show 7 more comments
This question already has an answer here:
TimeZoneInfo.ConvertTime from PST to UTC to AEST - off by one hour
1 answer
We are downloading data from our trading partner's API. Till now we were working with "E. Australia Standard Time" and it was working fine.
After daylight saving started our trading partner said that they are working with "Australian Eastern Daylight Time (AEDT)".
I have used following code to convert from UTC to "E. Australia Standard Time".
DateTime utcTime = DateTime.UtcNow;
TimeZoneInfo objTimeZoneInfo = TimeZoneInfo.FindSystemTimeZoneById("E. Australia Standard Time");
DateTime TPDateTime = TimeZoneInfo.ConvertTimeFromUtc(utcTime, objTimeZoneInfo);
But I am getting following errors when I use "E. Australia Daylight Time" or "Australian Eastern Daylight Time (AEDT)"
The time zone ID 'E. Australia Daylight Time' was not found on the local computer.
The time zone ID 'Australian Eastern Daylight Time (AEDT)' was not found on the local computer.
What timezone id should I pass to FindSystemTimeZoneById() method to convert correctly to Australian Eastern Daylight Time (AEDT)?
c# timezone timezone-offset
asked Nov 22 '18 at 15:34
YashYash
9112
This question already has an answer here:
TimeZoneInfo.ConvertTime from PST to UTC to AEST - off by one hour
1 answer
We are downloading data from our trading partner's API. Till now we were working with "E. Australia Standard Time" and it was working fine.
After daylight saving started our trading partner said that they are working with "Australian Eastern Daylight Time (AEDT)".
I have used following code to convert from UTC to "E. Australia Standard Time".
DateTime utcTime = DateTime.UtcNow;
TimeZoneInfo objTimeZoneInfo = TimeZoneInfo.FindSystemTimeZoneById("E. Australia Standard Time");
DateTime TPDateTime = TimeZoneInfo.ConvertTimeFromUtc(utcTime, objTimeZoneInfo);
But I am getting following errors when I use "E. Australia Daylight Time" or "Australian Eastern Daylight Time (AEDT)"
The time zone ID 'E. Australia Daylight Time' was not found on the local computer.
The time zone ID 'Australian Eastern Daylight Time (AEDT)' was not found on the local computer.
What timezone id should I pass to FindSystemTimeZoneById() method to convert correctly to Australian Eastern Daylight Time (AEDT)?
This question already has an answer here:
TimeZoneInfo.ConvertTime from PST to UTC to AEST - off by one hour
1 answer
c# timezone timezone-offset
c# timezone timezone-offset
asked Nov 22 '18 at 15:34
YashYash
9112
asked Nov 22 '18 at 15:34
YashYash
9112
edited Nov 22 '18 at 15:40
Yash
asked Nov 22 '18 at 15:34
YashYash
9112
asked Nov 22 '18 at 15:34
YashYash
9112
asked Nov 22 '18 at 15:34
YashYash
9112
9112
marked as duplicate by Panagiotis Kanavos c#
Users with the c# badge can single-handedly close c# questions as duplicates and reopen them as needed.
StackExchange.ready(function() {
if (StackExchange.options.isMobile) return;
$('.dupe-hammer-message-hover:not(.hover-bound)').each(function() {
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');
$hover.hover(
function() {
$hover.showInfoMessage('', {
messageElement: $msg.clone().show(),
transient: false,
position: { my: 'bottom left', at: 'top center', offsetTop: -7 },
dismissable: false,
relativeToBody: true
});
},
function() {
StackExchange.helpers.removeMessages();
}
);
});
});
Nov 22 '18 at 15:52
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
marked as duplicate by Panagiotis Kanavos c#
Users with the c# badge can single-handedly close c# questions as duplicates and reopen them as needed.
StackExchange.ready(function() {
if (StackExchange.options.isMobile) return;
$('.dupe-hammer-message-hover:not(.hover-bound)').each(function() {
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');
$hover.hover(
function() {
$hover.showInfoMessage('', {
messageElement: $msg.clone().show(),
transient: false,
position: { my: 'bottom left', at: 'top center', offsetTop: -7 },
dismissable: false,
relativeToBody: true
});
},
function() {
StackExchange.helpers.removeMessages();
}
);
});
});
Nov 22 '18 at 15:52
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
2
Well, your first one has a typo. Daylingh? I don't know if it will work any better correct, of course.
– John
Nov 22 '18 at 15:35
2
You can't use a non-existent timezone. Timezones do not refer to winter or summer time. The same timezone has rules that controll its offset during winter or summer.
– Panagiotis Kanavos
Nov 22 '18 at 15:39
1
Why the question? Are you getting the wrong time with"E. Australia Standard Time"?
– Panagiotis Kanavos
Nov 22 '18 at 15:41
2
@Yash btw if you really care about timezones use the NodaTime library and the IANA timezone names.Australia/Melbourneis a lot clearer than Windows timezone names. The IANA timezone database and names have become the de-facto standard
– Panagiotis Kanavos
Nov 22 '18 at 15:49
2
Follow the accepted answer of the below link: TimeZoneInfo.ConvertTime from PST to UTC to AEST
– Ali Azam
Nov 22 '18 at 15:51
|
show 7 more comments
2
Well, your first one has a typo. Daylingh? I don't know if it will work any better correct, of course.
– John
Nov 22 '18 at 15:35
2
You can't use a non-existent timezone. Timezones do not refer to winter or summer time. The same timezone has rules that controll its offset during winter or summer.
– Panagiotis Kanavos
Nov 22 '18 at 15:39
1
Why the question? Are you getting the wrong time with"E. Australia Standard Time"?
– Panagiotis Kanavos
Nov 22 '18 at 15:41
2
@Yash btw if you really care about timezones use the NodaTime library and the IANA timezone names.Australia/Melbourneis a lot clearer than Windows timezone names. The IANA timezone database and names have become the de-facto standard
– Panagiotis Kanavos
Nov 22 '18 at 15:49
2
Follow the accepted answer of the below link: TimeZoneInfo.ConvertTime from PST to UTC to AEST
– Ali Azam
Nov 22 '18 at 15:51
2
2
Well, your first one has a typo. Daylingh? I don't know if it will work any better correct, of course.
– John
Nov 22 '18 at 15:35
Well, your first one has a typo. Daylingh? I don't know if it will work any better correct, of course.
– John
Nov 22 '18 at 15:35
2
2
You can't use a non-existent timezone. Timezones do not refer to winter or summer time. The same timezone has rules that controll its offset during winter or summer.
– Panagiotis Kanavos
Nov 22 '18 at 15:39
You can't use a non-existent timezone. Timezones do not refer to winter or summer time. The same timezone has rules that controll its offset during winter or summer.
– Panagiotis Kanavos
Nov 22 '18 at 15:39
1
1
Why the question? Are you getting the wrong time with
"E. Australia Standard Time" ?– Panagiotis Kanavos
Nov 22 '18 at 15:41
Why the question? Are you getting the wrong time with
"E. Australia Standard Time" ?– Panagiotis Kanavos
Nov 22 '18 at 15:41
2
2
@Yash btw if you really care about timezones use the NodaTime library and the IANA timezone names.
Australia/Melbourne is a lot clearer than Windows timezone names. The IANA timezone database and names have become the de-facto standard– Panagiotis Kanavos
Nov 22 '18 at 15:49
@Yash btw if you really care about timezones use the NodaTime library and the IANA timezone names.
Australia/Melbourne is a lot clearer than Windows timezone names. The IANA timezone database and names have become the de-facto standard– Panagiotis Kanavos
Nov 22 '18 at 15:49
2
2
Follow the accepted answer of the below link: TimeZoneInfo.ConvertTime from PST to UTC to AEST
– Ali Azam
Nov 22 '18 at 15:51
Follow the accepted answer of the below link: TimeZoneInfo.ConvertTime from PST to UTC to AEST
– Ali Azam
Nov 22 '18 at 15:51
|
show 7 more comments
1 Answer
1
active
oldest
votes
You probably want to use "AUS Eastern Standard Time" (for Canberra, Hobart, Melbourne and Sydney). Despite having the word "Standard" in the name, this accounts for daylight savings time and uses UTC+10 in winter and UTC+11 in summer:
var tz = TimeZoneInfo.FindSystemTimeZoneById("AUS Eastern Standard Time");
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,1,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/01/2018 11:00:00
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,7,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/07/2018 10:00:00
The "E. Australia Standard Time" time zone is for Brisbane, where they do not observe daylight savings time.
You can get a complete list of available time zones using the TimeZoneInfo.GetSystemTimeZones() method, or by running tzutil /l at the command line.
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
That's a great example why one should use NodaTime and IANA timezone names!
– Panagiotis Kanavos
Nov 22 '18 at 15:50
Thank you so much, I think I got my answer. I have just one more question. Once day light saving is completed.. Will "AUS Eastern Standard Time" give me the standard time difference (UTC+10:00)?
– Yash
Nov 22 '18 at 15:51
@Yash As Panagiotis said, the rules are built into the TimeZoneInfo (check the object's properties).
– John
Nov 22 '18 at 15:56
1
@Yash Yes. The time zone includes the rules that define when the clocks are set forward and back. It will use the appropriate standard or daylight savings offset for the date and time you are converting.
– Phil Ross
Nov 22 '18 at 15:57
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
You probably want to use "AUS Eastern Standard Time" (for Canberra, Hobart, Melbourne and Sydney). Despite having the word "Standard" in the name, this accounts for daylight savings time and uses UTC+10 in winter and UTC+11 in summer:
var tz = TimeZoneInfo.FindSystemTimeZoneById("AUS Eastern Standard Time");
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,1,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/01/2018 11:00:00
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,7,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/07/2018 10:00:00
The "E. Australia Standard Time" time zone is for Brisbane, where they do not observe daylight savings time.
You can get a complete list of available time zones using the TimeZoneInfo.GetSystemTimeZones() method, or by running tzutil /l at the command line.
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
That's a great example why one should use NodaTime and IANA timezone names!
– Panagiotis Kanavos
Nov 22 '18 at 15:50
Thank you so much, I think I got my answer. I have just one more question. Once day light saving is completed.. Will "AUS Eastern Standard Time" give me the standard time difference (UTC+10:00)?
– Yash
Nov 22 '18 at 15:51
@Yash As Panagiotis said, the rules are built into the TimeZoneInfo (check the object's properties).
– John
Nov 22 '18 at 15:56
1
@Yash Yes. The time zone includes the rules that define when the clocks are set forward and back. It will use the appropriate standard or daylight savings offset for the date and time you are converting.
– Phil Ross
Nov 22 '18 at 15:57
add a comment |
You probably want to use "AUS Eastern Standard Time" (for Canberra, Hobart, Melbourne and Sydney). Despite having the word "Standard" in the name, this accounts for daylight savings time and uses UTC+10 in winter and UTC+11 in summer:
var tz = TimeZoneInfo.FindSystemTimeZoneById("AUS Eastern Standard Time");
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,1,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/01/2018 11:00:00
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,7,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/07/2018 10:00:00
The "E. Australia Standard Time" time zone is for Brisbane, where they do not observe daylight savings time.
You can get a complete list of available time zones using the TimeZoneInfo.GetSystemTimeZones() method, or by running tzutil /l at the command line.
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
That's a great example why one should use NodaTime and IANA timezone names!
– Panagiotis Kanavos
Nov 22 '18 at 15:50
Thank you so much, I think I got my answer. I have just one more question. Once day light saving is completed.. Will "AUS Eastern Standard Time" give me the standard time difference (UTC+10:00)?
– Yash
Nov 22 '18 at 15:51
@Yash As Panagiotis said, the rules are built into the TimeZoneInfo (check the object's properties).
– John
Nov 22 '18 at 15:56
1
@Yash Yes. The time zone includes the rules that define when the clocks are set forward and back. It will use the appropriate standard or daylight savings offset for the date and time you are converting.
– Phil Ross
Nov 22 '18 at 15:57
add a comment |
You probably want to use "AUS Eastern Standard Time" (for Canberra, Hobart, Melbourne and Sydney). Despite having the word "Standard" in the name, this accounts for daylight savings time and uses UTC+10 in winter and UTC+11 in summer:
var tz = TimeZoneInfo.FindSystemTimeZoneById("AUS Eastern Standard Time");
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,1,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/01/2018 11:00:00
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,7,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/07/2018 10:00:00
The "E. Australia Standard Time" time zone is for Brisbane, where they do not observe daylight savings time.
You can get a complete list of available time zones using the TimeZoneInfo.GetSystemTimeZones() method, or by running tzutil /l at the command line.
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
You probably want to use "AUS Eastern Standard Time" (for Canberra, Hobart, Melbourne and Sydney). Despite having the word "Standard" in the name, this accounts for daylight savings time and uses UTC+10 in winter and UTC+11 in summer:
var tz = TimeZoneInfo.FindSystemTimeZoneById("AUS Eastern Standard Time");
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,1,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/01/2018 11:00:00
TimeZoneInfo.ConvertTimeFromUtc(new DateTime(2018,7,1,0,0,0,DateTimeKind.Utc), tz);
// => 01/07/2018 10:00:00
The "E. Australia Standard Time" time zone is for Brisbane, where they do not observe daylight savings time.
You can get a complete list of available time zones using the TimeZoneInfo.GetSystemTimeZones() method, or by running tzutil /l at the command line.
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
edited Nov 22 '18 at 16:07
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
answered Nov 22 '18 at 15:47
Phil RossPhil Ross
20.5k96271
20.5k96271
That's a great example why one should use NodaTime and IANA timezone names!
– Panagiotis Kanavos
Nov 22 '18 at 15:50
Thank you so much, I think I got my answer. I have just one more question. Once day light saving is completed.. Will "AUS Eastern Standard Time" give me the standard time difference (UTC+10:00)?
– Yash
Nov 22 '18 at 15:51
@Yash As Panagiotis said, the rules are built into the TimeZoneInfo (check the object's properties).
– John
Nov 22 '18 at 15:56
1
@Yash Yes. The time zone includes the rules that define when the clocks are set forward and back. It will use the appropriate standard or daylight savings offset for the date and time you are converting.
– Phil Ross
Nov 22 '18 at 15:57
add a comment |
That's a great example why one should use NodaTime and IANA timezone names!
– Panagiotis Kanavos
Nov 22 '18 at 15:50
Thank you so much, I think I got my answer. I have just one more question. Once day light saving is completed.. Will "AUS Eastern Standard Time" give me the standard time difference (UTC+10:00)?
– Yash
Nov 22 '18 at 15:51
@Yash As Panagiotis said, the rules are built into the TimeZoneInfo (check the object's properties).
– John
Nov 22 '18 at 15:56
1
@Yash Yes. The time zone includes the rules that define when the clocks are set forward and back. It will use the appropriate standard or daylight savings offset for the date and time you are converting.
– Phil Ross
Nov 22 '18 at 15:57
That's a great example why one should use NodaTime and IANA timezone names!
– Panagiotis Kanavos
Nov 22 '18 at 15:50
That's a great example why one should use NodaTime and IANA timezone names!
– Panagiotis Kanavos
Nov 22 '18 at 15:50
Thank you so much, I think I got my answer. I have just one more question. Once day light saving is completed.. Will "AUS Eastern Standard Time" give me the standard time difference (UTC+10:00)?
– Yash
Nov 22 '18 at 15:51
Thank you so much, I think I got my answer. I have just one more question. Once day light saving is completed.. Will "AUS Eastern Standard Time" give me the standard time difference (UTC+10:00)?
– Yash
Nov 22 '18 at 15:51
@Yash As Panagiotis said, the rules are built into the TimeZoneInfo (check the object's properties).
– John
Nov 22 '18 at 15:56
@Yash As Panagiotis said, the rules are built into the TimeZoneInfo (check the object's properties).
– John
Nov 22 '18 at 15:56
1
1
@Yash Yes. The time zone includes the rules that define when the clocks are set forward and back. It will use the appropriate standard or daylight savings offset for the date and time you are converting.
– Phil Ross
Nov 22 '18 at 15:57
@Yash Yes. The time zone includes the rules that define when the clocks are set forward and back. It will use the appropriate standard or daylight savings offset for the date and time you are converting.
– Phil Ross
Nov 22 '18 at 15:57
add a comment |
2
Well, your first one has a typo. Daylingh? I don't know if it will work any better correct, of course.
– John
Nov 22 '18 at 15:35
2
You can't use a non-existent timezone. Timezones do not refer to winter or summer time. The same timezone has rules that controll its offset during winter or summer.
– Panagiotis Kanavos
Nov 22 '18 at 15:39
1
Why the question? Are you getting the wrong time with
"E. Australia Standard Time"?– Panagiotis Kanavos
Nov 22 '18 at 15:41
2
@Yash btw if you really care about timezones use the NodaTime library and the IANA timezone names.
Australia/Melbourneis a lot clearer than Windows timezone names. The IANA timezone database and names have become the de-facto standard– Panagiotis Kanavos
Nov 22 '18 at 15:49
2
Follow the accepted answer of the below link: TimeZoneInfo.ConvertTime from PST to UTC to AEST
– Ali Azam
Nov 22 '18 at 15:51