AMD Ryzen 5 2500U / Radeon Vega 8 Graphics drivers for Ubuntu 18.04












6















Does anyone know what additional drivers are required for "AMD Ryzen™ 5 2500U Mobile Processor with Radeon™ Vega 8 Graphics" on Ubuntu 18.04 ?



EDIT 1



Additional information -



Laptop model : Acer Swift 3 (should also be applicable for Dell Inspiron 15 5575)



Processor : AMD Ryzen™ 5 2500U Mobile Processor



GPU : Radeon™ Vega 8 (Integrated)



Queries / Issues -




  • Fractional scaling not available (How to ?)

  • Display resolution 1600x900 not available (How to ?)

  • Does it need any additional GPU driver (e.g. AMDGPU Pro) ?


Acer community thread on this topic link










share|improve this question
















bumped to the homepage by Community 2 days ago


This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
















  • There are no additional drivers needed. Fractional scaling has nothing to do with drivers, and it is available (though the GNOME UI might not allow it). Display resolution should be fine, assuming the display supports it.

    – dobey
    Sep 18 '18 at 16:21











  • On windows 10, 1600x900 is available and works fine. But the same is not available on Ubuntu / Linux Mint. I tried to add the resolution manually but it resulted in blank screen (ubuntuhandbook.org/index.php/2017/04/…)

    – Rupam
    Sep 18 '18 at 16:25











  • OK. The timings were probably wrong then. You are trying to use that resolution on the internal display? If so, why instead of the native resolution of the panel?

    – dobey
    Sep 18 '18 at 17:17











  • Because this laptop has a 1920x1080 display, and using the full resolution its almost not usable as the fonts are very small. Hence the solution would be to have fractional scaling (125%, windows has this) or using a lower display resolution like 1600x900 .

    – Rupam
    Sep 18 '18 at 17:35
















6















Does anyone know what additional drivers are required for "AMD Ryzen™ 5 2500U Mobile Processor with Radeon™ Vega 8 Graphics" on Ubuntu 18.04 ?



EDIT 1



Additional information -



Laptop model : Acer Swift 3 (should also be applicable for Dell Inspiron 15 5575)



Processor : AMD Ryzen™ 5 2500U Mobile Processor



GPU : Radeon™ Vega 8 (Integrated)



Queries / Issues -




  • Fractional scaling not available (How to ?)

  • Display resolution 1600x900 not available (How to ?)

  • Does it need any additional GPU driver (e.g. AMDGPU Pro) ?


Acer community thread on this topic link










share|improve this question
















bumped to the homepage by Community 2 days ago


This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
















  • There are no additional drivers needed. Fractional scaling has nothing to do with drivers, and it is available (though the GNOME UI might not allow it). Display resolution should be fine, assuming the display supports it.

    – dobey
    Sep 18 '18 at 16:21











  • On windows 10, 1600x900 is available and works fine. But the same is not available on Ubuntu / Linux Mint. I tried to add the resolution manually but it resulted in blank screen (ubuntuhandbook.org/index.php/2017/04/…)

    – Rupam
    Sep 18 '18 at 16:25











  • OK. The timings were probably wrong then. You are trying to use that resolution on the internal display? If so, why instead of the native resolution of the panel?

    – dobey
    Sep 18 '18 at 17:17











  • Because this laptop has a 1920x1080 display, and using the full resolution its almost not usable as the fonts are very small. Hence the solution would be to have fractional scaling (125%, windows has this) or using a lower display resolution like 1600x900 .

    – Rupam
    Sep 18 '18 at 17:35














6












6








6


2






Does anyone know what additional drivers are required for "AMD Ryzen™ 5 2500U Mobile Processor with Radeon™ Vega 8 Graphics" on Ubuntu 18.04 ?



EDIT 1



Additional information -



Laptop model : Acer Swift 3 (should also be applicable for Dell Inspiron 15 5575)



Processor : AMD Ryzen™ 5 2500U Mobile Processor



GPU : Radeon™ Vega 8 (Integrated)



Queries / Issues -




  • Fractional scaling not available (How to ?)

  • Display resolution 1600x900 not available (How to ?)

  • Does it need any additional GPU driver (e.g. AMDGPU Pro) ?


Acer community thread on this topic link










share|improve this question
















Does anyone know what additional drivers are required for "AMD Ryzen™ 5 2500U Mobile Processor with Radeon™ Vega 8 Graphics" on Ubuntu 18.04 ?



EDIT 1



Additional information -



Laptop model : Acer Swift 3 (should also be applicable for Dell Inspiron 15 5575)



Processor : AMD Ryzen™ 5 2500U Mobile Processor



GPU : Radeon™ Vega 8 (Integrated)



Queries / Issues -




  • Fractional scaling not available (How to ?)

  • Display resolution 1600x900 not available (How to ?)

  • Does it need any additional GPU driver (e.g. AMDGPU Pro) ?


Acer community thread on this topic link







amd-graphics






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Sep 18 '18 at 16:17







Rupam

















asked Jul 11 '18 at 4:26









RupamRupam

13115




13115





bumped to the homepage by Community 2 days ago


This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.







bumped to the homepage by Community 2 days ago


This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.















  • There are no additional drivers needed. Fractional scaling has nothing to do with drivers, and it is available (though the GNOME UI might not allow it). Display resolution should be fine, assuming the display supports it.

    – dobey
    Sep 18 '18 at 16:21











  • On windows 10, 1600x900 is available and works fine. But the same is not available on Ubuntu / Linux Mint. I tried to add the resolution manually but it resulted in blank screen (ubuntuhandbook.org/index.php/2017/04/…)

    – Rupam
    Sep 18 '18 at 16:25











  • OK. The timings were probably wrong then. You are trying to use that resolution on the internal display? If so, why instead of the native resolution of the panel?

    – dobey
    Sep 18 '18 at 17:17











  • Because this laptop has a 1920x1080 display, and using the full resolution its almost not usable as the fonts are very small. Hence the solution would be to have fractional scaling (125%, windows has this) or using a lower display resolution like 1600x900 .

    – Rupam
    Sep 18 '18 at 17:35



















  • There are no additional drivers needed. Fractional scaling has nothing to do with drivers, and it is available (though the GNOME UI might not allow it). Display resolution should be fine, assuming the display supports it.

    – dobey
    Sep 18 '18 at 16:21











  • On windows 10, 1600x900 is available and works fine. But the same is not available on Ubuntu / Linux Mint. I tried to add the resolution manually but it resulted in blank screen (ubuntuhandbook.org/index.php/2017/04/…)

    – Rupam
    Sep 18 '18 at 16:25











  • OK. The timings were probably wrong then. You are trying to use that resolution on the internal display? If so, why instead of the native resolution of the panel?

    – dobey
    Sep 18 '18 at 17:17











  • Because this laptop has a 1920x1080 display, and using the full resolution its almost not usable as the fonts are very small. Hence the solution would be to have fractional scaling (125%, windows has this) or using a lower display resolution like 1600x900 .

    – Rupam
    Sep 18 '18 at 17:35

















There are no additional drivers needed. Fractional scaling has nothing to do with drivers, and it is available (though the GNOME UI might not allow it). Display resolution should be fine, assuming the display supports it.

– dobey
Sep 18 '18 at 16:21





There are no additional drivers needed. Fractional scaling has nothing to do with drivers, and it is available (though the GNOME UI might not allow it). Display resolution should be fine, assuming the display supports it.

– dobey
Sep 18 '18 at 16:21













On windows 10, 1600x900 is available and works fine. But the same is not available on Ubuntu / Linux Mint. I tried to add the resolution manually but it resulted in blank screen (ubuntuhandbook.org/index.php/2017/04/…)

– Rupam
Sep 18 '18 at 16:25





On windows 10, 1600x900 is available and works fine. But the same is not available on Ubuntu / Linux Mint. I tried to add the resolution manually but it resulted in blank screen (ubuntuhandbook.org/index.php/2017/04/…)

– Rupam
Sep 18 '18 at 16:25













OK. The timings were probably wrong then. You are trying to use that resolution on the internal display? If so, why instead of the native resolution of the panel?

– dobey
Sep 18 '18 at 17:17





OK. The timings were probably wrong then. You are trying to use that resolution on the internal display? If so, why instead of the native resolution of the panel?

– dobey
Sep 18 '18 at 17:17













Because this laptop has a 1920x1080 display, and using the full resolution its almost not usable as the fonts are very small. Hence the solution would be to have fractional scaling (125%, windows has this) or using a lower display resolution like 1600x900 .

– Rupam
Sep 18 '18 at 17:35





Because this laptop has a 1920x1080 display, and using the full resolution its almost not usable as the fonts are very small. Hence the solution would be to have fractional scaling (125%, windows has this) or using a lower display resolution like 1600x900 .

– Rupam
Sep 18 '18 at 17:35










1 Answer
1






active

oldest

votes


















0














If anyone is still struggling with display resolution (tiny font) on Linux, here is what i did on my Linux Mint 19 (i switched to Mint).



Open control center, click on Appearance, go to Fonts tab, make sure Subpixel smoothing (LCDs) is selected and click on the Details button.



Under Resolution, turn off Automatic Detection, then change the Dots per inch (DPI) value to 120 (works pretty well in my case, fine tune the value according to your need).



Screenshots:



enter image description here



enter image description here



Firefox:



Make the following changes if you use Firefox.



Open Firefox, then type about:config in the address bar and hit enter, click on I accept the risk, on the next page, search for layout.css.devPixelsPerPx and modify the value to 1.3.



enter image description here






share|improve this answer























    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "89"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: true,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: 10,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1054077%2famd-ryzen-5-2500u-radeon-vega-8-graphics-drivers-for-ubuntu-18-04%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    0














    If anyone is still struggling with display resolution (tiny font) on Linux, here is what i did on my Linux Mint 19 (i switched to Mint).



    Open control center, click on Appearance, go to Fonts tab, make sure Subpixel smoothing (LCDs) is selected and click on the Details button.



    Under Resolution, turn off Automatic Detection, then change the Dots per inch (DPI) value to 120 (works pretty well in my case, fine tune the value according to your need).



    Screenshots:



    enter image description here



    enter image description here



    Firefox:



    Make the following changes if you use Firefox.



    Open Firefox, then type about:config in the address bar and hit enter, click on I accept the risk, on the next page, search for layout.css.devPixelsPerPx and modify the value to 1.3.



    enter image description here






    share|improve this answer




























      0














      If anyone is still struggling with display resolution (tiny font) on Linux, here is what i did on my Linux Mint 19 (i switched to Mint).



      Open control center, click on Appearance, go to Fonts tab, make sure Subpixel smoothing (LCDs) is selected and click on the Details button.



      Under Resolution, turn off Automatic Detection, then change the Dots per inch (DPI) value to 120 (works pretty well in my case, fine tune the value according to your need).



      Screenshots:



      enter image description here



      enter image description here



      Firefox:



      Make the following changes if you use Firefox.



      Open Firefox, then type about:config in the address bar and hit enter, click on I accept the risk, on the next page, search for layout.css.devPixelsPerPx and modify the value to 1.3.



      enter image description here






      share|improve this answer


























        0












        0








        0







        If anyone is still struggling with display resolution (tiny font) on Linux, here is what i did on my Linux Mint 19 (i switched to Mint).



        Open control center, click on Appearance, go to Fonts tab, make sure Subpixel smoothing (LCDs) is selected and click on the Details button.



        Under Resolution, turn off Automatic Detection, then change the Dots per inch (DPI) value to 120 (works pretty well in my case, fine tune the value according to your need).



        Screenshots:



        enter image description here



        enter image description here



        Firefox:



        Make the following changes if you use Firefox.



        Open Firefox, then type about:config in the address bar and hit enter, click on I accept the risk, on the next page, search for layout.css.devPixelsPerPx and modify the value to 1.3.



        enter image description here






        share|improve this answer













        If anyone is still struggling with display resolution (tiny font) on Linux, here is what i did on my Linux Mint 19 (i switched to Mint).



        Open control center, click on Appearance, go to Fonts tab, make sure Subpixel smoothing (LCDs) is selected and click on the Details button.



        Under Resolution, turn off Automatic Detection, then change the Dots per inch (DPI) value to 120 (works pretty well in my case, fine tune the value according to your need).



        Screenshots:



        enter image description here



        enter image description here



        Firefox:



        Make the following changes if you use Firefox.



        Open Firefox, then type about:config in the address bar and hit enter, click on I accept the risk, on the next page, search for layout.css.devPixelsPerPx and modify the value to 1.3.



        enter image description here







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Jan 6 at 5:00









        RupamRupam

        13115




        13115






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Ask Ubuntu!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1054077%2famd-ryzen-5-2500u-radeon-vega-8-graphics-drivers-for-ubuntu-18-04%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            How to change which sound is reproduced for terminal bell?

            Can I use Tabulator js library in my java Spring + Thymeleaf project?

            Title Spacing in Bjornstrup Chapter, Removing Chapter Number From Contents