Ionic compound having highest solubility in water
$begingroup$
Which ionic compound has highest solubility in water? I can find CsBr having highest solubility with 1230 g/L at 25 °C.
Note: compounds like ethanol are soluble to any extent in water, but they are covalent, not ionic.
inorganic-chemistry aqueous-solution solubility solutions liquids
$endgroup$
add a comment |
$begingroup$
Which ionic compound has highest solubility in water? I can find CsBr having highest solubility with 1230 g/L at 25 °C.
Note: compounds like ethanol are soluble to any extent in water, but they are covalent, not ionic.
inorganic-chemistry aqueous-solution solubility solutions liquids
$endgroup$
3
$begingroup$
It would be interesting to split in the two cases of molar solubility and mass solubility, though the latter is easier to find data on directly.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 2:51
1
$begingroup$
I could be cheeky and add Ionic Liquids to the list, which often mix with water at any ratio. Maybe clarify that you are talking about solids at standard conditions.
$endgroup$
– TAR86
Jan 11 at 10:06
$begingroup$
@TAR86 Darn, I was just a bit late with my edit! I'll leave that sidenote in my answer anyway.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 10:13
add a comment |
$begingroup$
Which ionic compound has highest solubility in water? I can find CsBr having highest solubility with 1230 g/L at 25 °C.
Note: compounds like ethanol are soluble to any extent in water, but they are covalent, not ionic.
inorganic-chemistry aqueous-solution solubility solutions liquids
$endgroup$
Which ionic compound has highest solubility in water? I can find CsBr having highest solubility with 1230 g/L at 25 °C.
Note: compounds like ethanol are soluble to any extent in water, but they are covalent, not ionic.
inorganic-chemistry aqueous-solution solubility solutions liquids
inorganic-chemistry aqueous-solution solubility solutions liquids
edited Jan 12 at 10:54
Loong♦
32.8k881168
32.8k881168
asked Jan 11 at 1:52
Harsh jainHarsh jain
6491515
6491515
3
$begingroup$
It would be interesting to split in the two cases of molar solubility and mass solubility, though the latter is easier to find data on directly.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 2:51
1
$begingroup$
I could be cheeky and add Ionic Liquids to the list, which often mix with water at any ratio. Maybe clarify that you are talking about solids at standard conditions.
$endgroup$
– TAR86
Jan 11 at 10:06
$begingroup$
@TAR86 Darn, I was just a bit late with my edit! I'll leave that sidenote in my answer anyway.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 10:13
add a comment |
3
$begingroup$
It would be interesting to split in the two cases of molar solubility and mass solubility, though the latter is easier to find data on directly.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 2:51
1
$begingroup$
I could be cheeky and add Ionic Liquids to the list, which often mix with water at any ratio. Maybe clarify that you are talking about solids at standard conditions.
$endgroup$
– TAR86
Jan 11 at 10:06
$begingroup$
@TAR86 Darn, I was just a bit late with my edit! I'll leave that sidenote in my answer anyway.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 10:13
3
3
$begingroup$
It would be interesting to split in the two cases of molar solubility and mass solubility, though the latter is easier to find data on directly.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 2:51
$begingroup$
It would be interesting to split in the two cases of molar solubility and mass solubility, though the latter is easier to find data on directly.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 2:51
1
1
$begingroup$
I could be cheeky and add Ionic Liquids to the list, which often mix with water at any ratio. Maybe clarify that you are talking about solids at standard conditions.
$endgroup$
– TAR86
Jan 11 at 10:06
$begingroup$
I could be cheeky and add Ionic Liquids to the list, which often mix with water at any ratio. Maybe clarify that you are talking about solids at standard conditions.
$endgroup$
– TAR86
Jan 11 at 10:06
$begingroup$
@TAR86 Darn, I was just a bit late with my edit! I'll leave that sidenote in my answer anyway.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 10:13
$begingroup$
@TAR86 Darn, I was just a bit late with my edit! I'll leave that sidenote in my answer anyway.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 10:13
add a comment |
4 Answers
4
active
oldest
votes
$begingroup$
Caesium salts are unapologetically ionic, and they typically have quite high mass solubilities in many solvents, including water.
Assuming organic ions are allowed, caesium acetate ($ce{H3CCO2^-Cs+}$) in particular has a remarkably high solubility of 9451 g/kg water at −2.5 °C, increasing to 13 455 g/L water at 88.5 °C.
Caesium formate ($ce{HCO2^-Cs+}$) is also quite soluble, with a solubility of 4880 g/kg water at 20 °C, resulting in 2.56 L of solution with a density of 2.297 g/mL (reference, .docx file). However, its solubility increases much faster with increasing temperature (J. Chem. Soc., Trans., 1922, 121, 1837-1843). At 100 °C, it reaches an outstanding value of 20 071 g/kg water! That's 11.6 molal, or roughly 20-25 mol/L assuming the density doesn't change too much. This saturated solution is 67.7% cesium formate by number of moles, which means more than two caesium ions and two formate ions per molecule of water.
I believe I have read somewhere that caesium formate is the record holder for highest mass solubility in water (evidently only at high temperatures). If this is not true, then I can scarcely believe it will be topped by much.
Tangentially, Ivan mentions Clerici's solution, which is actually a mixture of thallium(I) formate and thallium(I) malonate. The mixture doesn't count (though the individual components are quite soluble themselves), but it interesting to analyse. Apparently 300 g of each compound will dissolve in 40 g of water without saturating it room temperature (ref), giving a lower bound to their combined solubility of 15 000 g/kg water. This value rises with heating, and is the only way I can see to beat the mass solubility of caesium formate.
For further entertainment, I recommend these two solubility tables with a large number of entries (1, 2). The second one can be ordered by solubility at different temperatures. It's interesting to see the variety of cations and anions which can be combined to display extreme mass solubility.
Edit: If room-temperature ionic liquids are allowed, then it is quite likely some of them are miscible with water in any proportion, which is effectively "infinite solubility in water". Something as simple as ethylammonium nitrate ($ce{C2H5NH3+NO3-}$) may suffice.
$endgroup$
1
$begingroup$
If they are ionic, the state of matter does not matter. +1.
$endgroup$
– Oscar Lanzi
Jan 11 at 12:10
add a comment |
$begingroup$
The following data is compiled from [1, pp. 4-44, 5-167]:
Table 1. Selected solubility values of the inorganic compounds with significant ionic character at $25~mathrm{^circ C}$.
$$
begin{array}{lc}
hline
text{Formula} & text{Solubility in water}/pu{g L-1}\
hline
ce{CsF} & 5730\
ce{SbF3} & 4920\
ce{LiClO3} & 4587\
ce{Pb(ClO4)2} & 4405\
ce{ZnCl2} & 4080\
hline
end{array}
$$
Solubility of antimony(III) trichloride $ce{SbCl3}$ is $9870~mathrm{g~L^{-1}}$ at $25~mathrm{^circ C}$, but technically it's not an ionic compound.
References
- Haynes, W. M.; Lide, D. R.; Bruno, T. J. CRC Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical and Physical Data.; 2017; Vol. 97.
$endgroup$
$begingroup$
I've seen antimony trichloride before in tables, but it is apparently very easily hydrolysed, so perhaps it shouldn't be counted either way.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 7:53
$begingroup$
@NicolauSakerNeto Yep, you are right, and the same probably goes for $ce{ZnCl2}$. I also omitted $ce{ZnBr2}$ for similar reason (and it's covalency, too).
$endgroup$
– andselisk
Jan 11 at 7:55
add a comment |
$begingroup$
There is not going to be a single definitive answer, primarily because of a wide gray zone surrounding the domain of ionic compounds. Besides, as Nikolau noted, the question is ambiguous.
If you want mass concentration, then look at $ce{InI3}$ which claims a whopping $13100~mathrm{g/L}$. Pity that it is probably ionic in name only, judging by the solubility in non-polar solvents. Well, then look at those mentioned by andselisk, though the ionic nature of some of them is also debatable, and then at the thallium formate (a component of Clerici solution) with $sim5000~mathrm{g/L}$.
If you want molar concentration, then the question is still ambiguous (are we looking at molarity or molality?), and the pretty strong contenders are $ce{NaOH}$, $ce{BeF2}$, $ce{LiClO3}$.
So it goes.
$endgroup$
1
$begingroup$
True, $ce{InI3}$ is weird, but it's definitely not ionic and the reference for the solubility value dates back to 1940s or something:)
$endgroup$
– andselisk
Jan 11 at 6:54
add a comment |
$begingroup$
We can do better than that. Ammonium nitrate = 1500 g/L at 20°C.
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "431"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f107782%2fionic-compound-having-highest-solubility-in-water%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Caesium salts are unapologetically ionic, and they typically have quite high mass solubilities in many solvents, including water.
Assuming organic ions are allowed, caesium acetate ($ce{H3CCO2^-Cs+}$) in particular has a remarkably high solubility of 9451 g/kg water at −2.5 °C, increasing to 13 455 g/L water at 88.5 °C.
Caesium formate ($ce{HCO2^-Cs+}$) is also quite soluble, with a solubility of 4880 g/kg water at 20 °C, resulting in 2.56 L of solution with a density of 2.297 g/mL (reference, .docx file). However, its solubility increases much faster with increasing temperature (J. Chem. Soc., Trans., 1922, 121, 1837-1843). At 100 °C, it reaches an outstanding value of 20 071 g/kg water! That's 11.6 molal, or roughly 20-25 mol/L assuming the density doesn't change too much. This saturated solution is 67.7% cesium formate by number of moles, which means more than two caesium ions and two formate ions per molecule of water.
I believe I have read somewhere that caesium formate is the record holder for highest mass solubility in water (evidently only at high temperatures). If this is not true, then I can scarcely believe it will be topped by much.
Tangentially, Ivan mentions Clerici's solution, which is actually a mixture of thallium(I) formate and thallium(I) malonate. The mixture doesn't count (though the individual components are quite soluble themselves), but it interesting to analyse. Apparently 300 g of each compound will dissolve in 40 g of water without saturating it room temperature (ref), giving a lower bound to their combined solubility of 15 000 g/kg water. This value rises with heating, and is the only way I can see to beat the mass solubility of caesium formate.
For further entertainment, I recommend these two solubility tables with a large number of entries (1, 2). The second one can be ordered by solubility at different temperatures. It's interesting to see the variety of cations and anions which can be combined to display extreme mass solubility.
Edit: If room-temperature ionic liquids are allowed, then it is quite likely some of them are miscible with water in any proportion, which is effectively "infinite solubility in water". Something as simple as ethylammonium nitrate ($ce{C2H5NH3+NO3-}$) may suffice.
$endgroup$
1
$begingroup$
If they are ionic, the state of matter does not matter. +1.
$endgroup$
– Oscar Lanzi
Jan 11 at 12:10
add a comment |
$begingroup$
Caesium salts are unapologetically ionic, and they typically have quite high mass solubilities in many solvents, including water.
Assuming organic ions are allowed, caesium acetate ($ce{H3CCO2^-Cs+}$) in particular has a remarkably high solubility of 9451 g/kg water at −2.5 °C, increasing to 13 455 g/L water at 88.5 °C.
Caesium formate ($ce{HCO2^-Cs+}$) is also quite soluble, with a solubility of 4880 g/kg water at 20 °C, resulting in 2.56 L of solution with a density of 2.297 g/mL (reference, .docx file). However, its solubility increases much faster with increasing temperature (J. Chem. Soc., Trans., 1922, 121, 1837-1843). At 100 °C, it reaches an outstanding value of 20 071 g/kg water! That's 11.6 molal, or roughly 20-25 mol/L assuming the density doesn't change too much. This saturated solution is 67.7% cesium formate by number of moles, which means more than two caesium ions and two formate ions per molecule of water.
I believe I have read somewhere that caesium formate is the record holder for highest mass solubility in water (evidently only at high temperatures). If this is not true, then I can scarcely believe it will be topped by much.
Tangentially, Ivan mentions Clerici's solution, which is actually a mixture of thallium(I) formate and thallium(I) malonate. The mixture doesn't count (though the individual components are quite soluble themselves), but it interesting to analyse. Apparently 300 g of each compound will dissolve in 40 g of water without saturating it room temperature (ref), giving a lower bound to their combined solubility of 15 000 g/kg water. This value rises with heating, and is the only way I can see to beat the mass solubility of caesium formate.
For further entertainment, I recommend these two solubility tables with a large number of entries (1, 2). The second one can be ordered by solubility at different temperatures. It's interesting to see the variety of cations and anions which can be combined to display extreme mass solubility.
Edit: If room-temperature ionic liquids are allowed, then it is quite likely some of them are miscible with water in any proportion, which is effectively "infinite solubility in water". Something as simple as ethylammonium nitrate ($ce{C2H5NH3+NO3-}$) may suffice.
$endgroup$
1
$begingroup$
If they are ionic, the state of matter does not matter. +1.
$endgroup$
– Oscar Lanzi
Jan 11 at 12:10
add a comment |
$begingroup$
Caesium salts are unapologetically ionic, and they typically have quite high mass solubilities in many solvents, including water.
Assuming organic ions are allowed, caesium acetate ($ce{H3CCO2^-Cs+}$) in particular has a remarkably high solubility of 9451 g/kg water at −2.5 °C, increasing to 13 455 g/L water at 88.5 °C.
Caesium formate ($ce{HCO2^-Cs+}$) is also quite soluble, with a solubility of 4880 g/kg water at 20 °C, resulting in 2.56 L of solution with a density of 2.297 g/mL (reference, .docx file). However, its solubility increases much faster with increasing temperature (J. Chem. Soc., Trans., 1922, 121, 1837-1843). At 100 °C, it reaches an outstanding value of 20 071 g/kg water! That's 11.6 molal, or roughly 20-25 mol/L assuming the density doesn't change too much. This saturated solution is 67.7% cesium formate by number of moles, which means more than two caesium ions and two formate ions per molecule of water.
I believe I have read somewhere that caesium formate is the record holder for highest mass solubility in water (evidently only at high temperatures). If this is not true, then I can scarcely believe it will be topped by much.
Tangentially, Ivan mentions Clerici's solution, which is actually a mixture of thallium(I) formate and thallium(I) malonate. The mixture doesn't count (though the individual components are quite soluble themselves), but it interesting to analyse. Apparently 300 g of each compound will dissolve in 40 g of water without saturating it room temperature (ref), giving a lower bound to their combined solubility of 15 000 g/kg water. This value rises with heating, and is the only way I can see to beat the mass solubility of caesium formate.
For further entertainment, I recommend these two solubility tables with a large number of entries (1, 2). The second one can be ordered by solubility at different temperatures. It's interesting to see the variety of cations and anions which can be combined to display extreme mass solubility.
Edit: If room-temperature ionic liquids are allowed, then it is quite likely some of them are miscible with water in any proportion, which is effectively "infinite solubility in water". Something as simple as ethylammonium nitrate ($ce{C2H5NH3+NO3-}$) may suffice.
$endgroup$
Caesium salts are unapologetically ionic, and they typically have quite high mass solubilities in many solvents, including water.
Assuming organic ions are allowed, caesium acetate ($ce{H3CCO2^-Cs+}$) in particular has a remarkably high solubility of 9451 g/kg water at −2.5 °C, increasing to 13 455 g/L water at 88.5 °C.
Caesium formate ($ce{HCO2^-Cs+}$) is also quite soluble, with a solubility of 4880 g/kg water at 20 °C, resulting in 2.56 L of solution with a density of 2.297 g/mL (reference, .docx file). However, its solubility increases much faster with increasing temperature (J. Chem. Soc., Trans., 1922, 121, 1837-1843). At 100 °C, it reaches an outstanding value of 20 071 g/kg water! That's 11.6 molal, or roughly 20-25 mol/L assuming the density doesn't change too much. This saturated solution is 67.7% cesium formate by number of moles, which means more than two caesium ions and two formate ions per molecule of water.
I believe I have read somewhere that caesium formate is the record holder for highest mass solubility in water (evidently only at high temperatures). If this is not true, then I can scarcely believe it will be topped by much.
Tangentially, Ivan mentions Clerici's solution, which is actually a mixture of thallium(I) formate and thallium(I) malonate. The mixture doesn't count (though the individual components are quite soluble themselves), but it interesting to analyse. Apparently 300 g of each compound will dissolve in 40 g of water without saturating it room temperature (ref), giving a lower bound to their combined solubility of 15 000 g/kg water. This value rises with heating, and is the only way I can see to beat the mass solubility of caesium formate.
For further entertainment, I recommend these two solubility tables with a large number of entries (1, 2). The second one can be ordered by solubility at different temperatures. It's interesting to see the variety of cations and anions which can be combined to display extreme mass solubility.
Edit: If room-temperature ionic liquids are allowed, then it is quite likely some of them are miscible with water in any proportion, which is effectively "infinite solubility in water". Something as simple as ethylammonium nitrate ($ce{C2H5NH3+NO3-}$) may suffice.
edited Jan 11 at 10:08
answered Jan 11 at 9:36
Nicolau Saker NetoNicolau Saker Neto
18.9k35394
18.9k35394
1
$begingroup$
If they are ionic, the state of matter does not matter. +1.
$endgroup$
– Oscar Lanzi
Jan 11 at 12:10
add a comment |
1
$begingroup$
If they are ionic, the state of matter does not matter. +1.
$endgroup$
– Oscar Lanzi
Jan 11 at 12:10
1
1
$begingroup$
If they are ionic, the state of matter does not matter. +1.
$endgroup$
– Oscar Lanzi
Jan 11 at 12:10
$begingroup$
If they are ionic, the state of matter does not matter. +1.
$endgroup$
– Oscar Lanzi
Jan 11 at 12:10
add a comment |
$begingroup$
The following data is compiled from [1, pp. 4-44, 5-167]:
Table 1. Selected solubility values of the inorganic compounds with significant ionic character at $25~mathrm{^circ C}$.
$$
begin{array}{lc}
hline
text{Formula} & text{Solubility in water}/pu{g L-1}\
hline
ce{CsF} & 5730\
ce{SbF3} & 4920\
ce{LiClO3} & 4587\
ce{Pb(ClO4)2} & 4405\
ce{ZnCl2} & 4080\
hline
end{array}
$$
Solubility of antimony(III) trichloride $ce{SbCl3}$ is $9870~mathrm{g~L^{-1}}$ at $25~mathrm{^circ C}$, but technically it's not an ionic compound.
References
- Haynes, W. M.; Lide, D. R.; Bruno, T. J. CRC Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical and Physical Data.; 2017; Vol. 97.
$endgroup$
$begingroup$
I've seen antimony trichloride before in tables, but it is apparently very easily hydrolysed, so perhaps it shouldn't be counted either way.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 7:53
$begingroup$
@NicolauSakerNeto Yep, you are right, and the same probably goes for $ce{ZnCl2}$. I also omitted $ce{ZnBr2}$ for similar reason (and it's covalency, too).
$endgroup$
– andselisk
Jan 11 at 7:55
add a comment |
$begingroup$
The following data is compiled from [1, pp. 4-44, 5-167]:
Table 1. Selected solubility values of the inorganic compounds with significant ionic character at $25~mathrm{^circ C}$.
$$
begin{array}{lc}
hline
text{Formula} & text{Solubility in water}/pu{g L-1}\
hline
ce{CsF} & 5730\
ce{SbF3} & 4920\
ce{LiClO3} & 4587\
ce{Pb(ClO4)2} & 4405\
ce{ZnCl2} & 4080\
hline
end{array}
$$
Solubility of antimony(III) trichloride $ce{SbCl3}$ is $9870~mathrm{g~L^{-1}}$ at $25~mathrm{^circ C}$, but technically it's not an ionic compound.
References
- Haynes, W. M.; Lide, D. R.; Bruno, T. J. CRC Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical and Physical Data.; 2017; Vol. 97.
$endgroup$
$begingroup$
I've seen antimony trichloride before in tables, but it is apparently very easily hydrolysed, so perhaps it shouldn't be counted either way.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 7:53
$begingroup$
@NicolauSakerNeto Yep, you are right, and the same probably goes for $ce{ZnCl2}$. I also omitted $ce{ZnBr2}$ for similar reason (and it's covalency, too).
$endgroup$
– andselisk
Jan 11 at 7:55
add a comment |
$begingroup$
The following data is compiled from [1, pp. 4-44, 5-167]:
Table 1. Selected solubility values of the inorganic compounds with significant ionic character at $25~mathrm{^circ C}$.
$$
begin{array}{lc}
hline
text{Formula} & text{Solubility in water}/pu{g L-1}\
hline
ce{CsF} & 5730\
ce{SbF3} & 4920\
ce{LiClO3} & 4587\
ce{Pb(ClO4)2} & 4405\
ce{ZnCl2} & 4080\
hline
end{array}
$$
Solubility of antimony(III) trichloride $ce{SbCl3}$ is $9870~mathrm{g~L^{-1}}$ at $25~mathrm{^circ C}$, but technically it's not an ionic compound.
References
- Haynes, W. M.; Lide, D. R.; Bruno, T. J. CRC Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical and Physical Data.; 2017; Vol. 97.
$endgroup$
The following data is compiled from [1, pp. 4-44, 5-167]:
Table 1. Selected solubility values of the inorganic compounds with significant ionic character at $25~mathrm{^circ C}$.
$$
begin{array}{lc}
hline
text{Formula} & text{Solubility in water}/pu{g L-1}\
hline
ce{CsF} & 5730\
ce{SbF3} & 4920\
ce{LiClO3} & 4587\
ce{Pb(ClO4)2} & 4405\
ce{ZnCl2} & 4080\
hline
end{array}
$$
Solubility of antimony(III) trichloride $ce{SbCl3}$ is $9870~mathrm{g~L^{-1}}$ at $25~mathrm{^circ C}$, but technically it's not an ionic compound.
References
- Haynes, W. M.; Lide, D. R.; Bruno, T. J. CRC Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical and Physical Data.; 2017; Vol. 97.
edited Jan 11 at 6:53
answered Jan 11 at 5:28
andseliskandselisk
14.5k649107
14.5k649107
$begingroup$
I've seen antimony trichloride before in tables, but it is apparently very easily hydrolysed, so perhaps it shouldn't be counted either way.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 7:53
$begingroup$
@NicolauSakerNeto Yep, you are right, and the same probably goes for $ce{ZnCl2}$. I also omitted $ce{ZnBr2}$ for similar reason (and it's covalency, too).
$endgroup$
– andselisk
Jan 11 at 7:55
add a comment |
$begingroup$
I've seen antimony trichloride before in tables, but it is apparently very easily hydrolysed, so perhaps it shouldn't be counted either way.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 7:53
$begingroup$
@NicolauSakerNeto Yep, you are right, and the same probably goes for $ce{ZnCl2}$. I also omitted $ce{ZnBr2}$ for similar reason (and it's covalency, too).
$endgroup$
– andselisk
Jan 11 at 7:55
$begingroup$
I've seen antimony trichloride before in tables, but it is apparently very easily hydrolysed, so perhaps it shouldn't be counted either way.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 7:53
$begingroup$
I've seen antimony trichloride before in tables, but it is apparently very easily hydrolysed, so perhaps it shouldn't be counted either way.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 7:53
$begingroup$
@NicolauSakerNeto Yep, you are right, and the same probably goes for $ce{ZnCl2}$. I also omitted $ce{ZnBr2}$ for similar reason (and it's covalency, too).
$endgroup$
– andselisk
Jan 11 at 7:55
$begingroup$
@NicolauSakerNeto Yep, you are right, and the same probably goes for $ce{ZnCl2}$. I also omitted $ce{ZnBr2}$ for similar reason (and it's covalency, too).
$endgroup$
– andselisk
Jan 11 at 7:55
add a comment |
$begingroup$
There is not going to be a single definitive answer, primarily because of a wide gray zone surrounding the domain of ionic compounds. Besides, as Nikolau noted, the question is ambiguous.
If you want mass concentration, then look at $ce{InI3}$ which claims a whopping $13100~mathrm{g/L}$. Pity that it is probably ionic in name only, judging by the solubility in non-polar solvents. Well, then look at those mentioned by andselisk, though the ionic nature of some of them is also debatable, and then at the thallium formate (a component of Clerici solution) with $sim5000~mathrm{g/L}$.
If you want molar concentration, then the question is still ambiguous (are we looking at molarity or molality?), and the pretty strong contenders are $ce{NaOH}$, $ce{BeF2}$, $ce{LiClO3}$.
So it goes.
$endgroup$
1
$begingroup$
True, $ce{InI3}$ is weird, but it's definitely not ionic and the reference for the solubility value dates back to 1940s or something:)
$endgroup$
– andselisk
Jan 11 at 6:54
add a comment |
$begingroup$
There is not going to be a single definitive answer, primarily because of a wide gray zone surrounding the domain of ionic compounds. Besides, as Nikolau noted, the question is ambiguous.
If you want mass concentration, then look at $ce{InI3}$ which claims a whopping $13100~mathrm{g/L}$. Pity that it is probably ionic in name only, judging by the solubility in non-polar solvents. Well, then look at those mentioned by andselisk, though the ionic nature of some of them is also debatable, and then at the thallium formate (a component of Clerici solution) with $sim5000~mathrm{g/L}$.
If you want molar concentration, then the question is still ambiguous (are we looking at molarity or molality?), and the pretty strong contenders are $ce{NaOH}$, $ce{BeF2}$, $ce{LiClO3}$.
So it goes.
$endgroup$
1
$begingroup$
True, $ce{InI3}$ is weird, but it's definitely not ionic and the reference for the solubility value dates back to 1940s or something:)
$endgroup$
– andselisk
Jan 11 at 6:54
add a comment |
$begingroup$
There is not going to be a single definitive answer, primarily because of a wide gray zone surrounding the domain of ionic compounds. Besides, as Nikolau noted, the question is ambiguous.
If you want mass concentration, then look at $ce{InI3}$ which claims a whopping $13100~mathrm{g/L}$. Pity that it is probably ionic in name only, judging by the solubility in non-polar solvents. Well, then look at those mentioned by andselisk, though the ionic nature of some of them is also debatable, and then at the thallium formate (a component of Clerici solution) with $sim5000~mathrm{g/L}$.
If you want molar concentration, then the question is still ambiguous (are we looking at molarity or molality?), and the pretty strong contenders are $ce{NaOH}$, $ce{BeF2}$, $ce{LiClO3}$.
So it goes.
$endgroup$
There is not going to be a single definitive answer, primarily because of a wide gray zone surrounding the domain of ionic compounds. Besides, as Nikolau noted, the question is ambiguous.
If you want mass concentration, then look at $ce{InI3}$ which claims a whopping $13100~mathrm{g/L}$. Pity that it is probably ionic in name only, judging by the solubility in non-polar solvents. Well, then look at those mentioned by andselisk, though the ionic nature of some of them is also debatable, and then at the thallium formate (a component of Clerici solution) with $sim5000~mathrm{g/L}$.
If you want molar concentration, then the question is still ambiguous (are we looking at molarity or molality?), and the pretty strong contenders are $ce{NaOH}$, $ce{BeF2}$, $ce{LiClO3}$.
So it goes.
answered Jan 11 at 6:42
Ivan NeretinIvan Neretin
23k34686
23k34686
1
$begingroup$
True, $ce{InI3}$ is weird, but it's definitely not ionic and the reference for the solubility value dates back to 1940s or something:)
$endgroup$
– andselisk
Jan 11 at 6:54
add a comment |
1
$begingroup$
True, $ce{InI3}$ is weird, but it's definitely not ionic and the reference for the solubility value dates back to 1940s or something:)
$endgroup$
– andselisk
Jan 11 at 6:54
1
1
$begingroup$
True, $ce{InI3}$ is weird, but it's definitely not ionic and the reference for the solubility value dates back to 1940s or something:)
$endgroup$
– andselisk
Jan 11 at 6:54
$begingroup$
True, $ce{InI3}$ is weird, but it's definitely not ionic and the reference for the solubility value dates back to 1940s or something:)
$endgroup$
– andselisk
Jan 11 at 6:54
add a comment |
$begingroup$
We can do better than that. Ammonium nitrate = 1500 g/L at 20°C.
$endgroup$
add a comment |
$begingroup$
We can do better than that. Ammonium nitrate = 1500 g/L at 20°C.
$endgroup$
add a comment |
$begingroup$
We can do better than that. Ammonium nitrate = 1500 g/L at 20°C.
$endgroup$
We can do better than that. Ammonium nitrate = 1500 g/L at 20°C.
answered Jan 11 at 2:47
Oscar LanziOscar Lanzi
15k12646
15k12646
add a comment |
add a comment |
Thanks for contributing an answer to Chemistry Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fchemistry.stackexchange.com%2fquestions%2f107782%2fionic-compound-having-highest-solubility-in-water%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
3
$begingroup$
It would be interesting to split in the two cases of molar solubility and mass solubility, though the latter is easier to find data on directly.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 2:51
1
$begingroup$
I could be cheeky and add Ionic Liquids to the list, which often mix with water at any ratio. Maybe clarify that you are talking about solids at standard conditions.
$endgroup$
– TAR86
Jan 11 at 10:06
$begingroup$
@TAR86 Darn, I was just a bit late with my edit! I'll leave that sidenote in my answer anyway.
$endgroup$
– Nicolau Saker Neto
Jan 11 at 10:13