Ubuntu 18 - Touchpad Buttons not working
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}
I have installed Ubuntu 18 on my new Notebook
Everything works fine, except the right and left click Button of the touchpad. When I tap with one finger (left click) oder with two fingers (right click) on the touch field. It works, but not the mechanical buttons below...
$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB-PS/2 Optical Mouse id=8 [slave pointer (2)]
⎜ ↳ HTIX5288:00 0911:5288 Touchpad id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ USB 2.0 PC Camera: PC Camera id=9 [slave keyboard (3)]
↳ Intel HID events id=11 [slave keyboard (3)]
↳ Intel HID 5 button array id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=13 [slave keyboard (3)]
I have tried to modify the synclient with
LTCornerButton
LBCornerButton
RTCornerButton
RBCornerButton
But I think this parameter are not the right ones...
Does anyone have an idea? Because every solution i find somewhere is for the problem, that the whole touchpad doesn't work...
Best regards,
Martin
mouse touchpad synaptics multi-touch
edited Jul 3 '18 at 20:02
dobey
33.1k33886
asked Jul 3 '18 at 6:20
MaubyMauby
211
add a comment |
I have installed Ubuntu 18 on my new Notebook
Everything works fine, except the right and left click Button of the touchpad. When I tap with one finger (left click) oder with two fingers (right click) on the touch field. It works, but not the mechanical buttons below...
$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB-PS/2 Optical Mouse id=8 [slave pointer (2)]
⎜ ↳ HTIX5288:00 0911:5288 Touchpad id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ USB 2.0 PC Camera: PC Camera id=9 [slave keyboard (3)]
↳ Intel HID events id=11 [slave keyboard (3)]
↳ Intel HID 5 button array id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=13 [slave keyboard (3)]
I have tried to modify the synclient with
LTCornerButton
LBCornerButton
RTCornerButton
RBCornerButton
But I think this parameter are not the right ones...
Does anyone have an idea? Because every solution i find somewhere is for the problem, that the whole touchpad doesn't work...
Best regards,
Martin
mouse touchpad synaptics multi-touch
edited Jul 3 '18 at 20:02
dobey
33.1k33886
asked Jul 3 '18 at 6:20
MaubyMauby
211
Does this answer work askubuntu.com/a/1067292/790920 ?
– abu_bua
Aug 25 '18 at 15:18
Hi, Martin what's the output ofxinput list-props 10? you may want to look at Capabilities property or maybe other you may find relevant. You can use this page as reference
– aasril
Sep 8 '18 at 1:41
add a comment |
I have installed Ubuntu 18 on my new Notebook
Everything works fine, except the right and left click Button of the touchpad. When I tap with one finger (left click) oder with two fingers (right click) on the touch field. It works, but not the mechanical buttons below...
$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB-PS/2 Optical Mouse id=8 [slave pointer (2)]
⎜ ↳ HTIX5288:00 0911:5288 Touchpad id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ USB 2.0 PC Camera: PC Camera id=9 [slave keyboard (3)]
↳ Intel HID events id=11 [slave keyboard (3)]
↳ Intel HID 5 button array id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=13 [slave keyboard (3)]
I have tried to modify the synclient with
LTCornerButton
LBCornerButton
RTCornerButton
RBCornerButton
But I think this parameter are not the right ones...
Does anyone have an idea? Because every solution i find somewhere is for the problem, that the whole touchpad doesn't work...
Best regards,
Martin
mouse touchpad synaptics multi-touch
edited Jul 3 '18 at 20:02
dobey
33.1k33886
asked Jul 3 '18 at 6:20
MaubyMauby
211
I have installed Ubuntu 18 on my new Notebook
Everything works fine, except the right and left click Button of the touchpad. When I tap with one finger (left click) oder with two fingers (right click) on the touch field. It works, but not the mechanical buttons below...
$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB-PS/2 Optical Mouse id=8 [slave pointer (2)]
⎜ ↳ HTIX5288:00 0911:5288 Touchpad id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ USB 2.0 PC Camera: PC Camera id=9 [slave keyboard (3)]
↳ Intel HID events id=11 [slave keyboard (3)]
↳ Intel HID 5 button array id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=13 [slave keyboard (3)]
I have tried to modify the synclient with
LTCornerButton
LBCornerButton
RTCornerButton
RBCornerButton
But I think this parameter are not the right ones...
Does anyone have an idea? Because every solution i find somewhere is for the problem, that the whole touchpad doesn't work...
Best regards,
Martin
mouse touchpad synaptics multi-touch
mouse touchpad synaptics multi-touch
edited Jul 3 '18 at 20:02
dobey
33.1k33886
asked Jul 3 '18 at 6:20
MaubyMauby
211
edited Jul 3 '18 at 20:02
dobey
33.1k33886
asked Jul 3 '18 at 6:20
MaubyMauby
211
edited Jul 3 '18 at 20:02
dobey
33.1k33886
edited Jul 3 '18 at 20:02
dobey
33.1k33886
edited Jul 3 '18 at 20:02
dobey
33.1k33886
33.1k33886
asked Jul 3 '18 at 6:20
MaubyMauby
211
asked Jul 3 '18 at 6:20
MaubyMauby
211
asked Jul 3 '18 at 6:20
MaubyMauby
211
211
Does this answer work askubuntu.com/a/1067292/790920 ?
– abu_bua
Aug 25 '18 at 15:18
Hi, Martin what's the output ofxinput list-props 10? you may want to look at Capabilities property or maybe other you may find relevant. You can use this page as reference
– aasril
Sep 8 '18 at 1:41
add a comment |
Does this answer work askubuntu.com/a/1067292/790920 ?
– abu_bua
Aug 25 '18 at 15:18
Hi, Martin what's the output ofxinput list-props 10? you may want to look at Capabilities property or maybe other you may find relevant. You can use this page as reference
– aasril
Sep 8 '18 at 1:41
Does this answer work askubuntu.com/a/1067292/790920 ?
– abu_bua
Aug 25 '18 at 15:18
Does this answer work askubuntu.com/a/1067292/790920 ?
– abu_bua
Aug 25 '18 at 15:18
Hi, Martin what's the output of
xinput list-props 10? you may want to look at Capabilities property or maybe other you may find relevant. You can use this page as reference– aasril
Sep 8 '18 at 1:41
Hi, Martin what's the output of
xinput list-props 10? you may want to look at Capabilities property or maybe other you may find relevant. You can use this page as reference– aasril
Sep 8 '18 at 1:41
add a comment |
3 Answers
3
active
oldest
votes
synclient has no effect because Synaptics is not the TouchPad driver on Ubuntu 18.04. Default installs use libinput instead.
Now, what kind of hardware do you have and what do we need to do to enable the buttons? Previous asked for info from X input. That may help.
Why isn't libinput just doing the right thing? More likely issue is your hardware is unfamiliar to libinput and the system is guessing incorrectly on measurements. Your buttons may be under the hand rest. Possible your attempt to config with Synaptics setting makes this worse.
What brand laptop, what model TouchPad?
Oh, does a USB mouse work?
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
Thank you very much for your comment. I opened the bounty, because I have the exact same problem as the OP, even with the same ID (HTIX5288:00 0911:5288 Touchpad) being displayed by xinput. The output of my xinput and ofxinput list-props 15can be found here: pastebin.com/pLnWqKcD . My hardware: Its a Medion Akoya E3222 (see here; unfortunately the webpage is in German: medion.com/aldi/laptops/md62450-sued-de). A USB mouse is working perfectly. I don't know how I can find out the TouchPad model, sorry.
– PhoemueX
Sep 10 '18 at 10:50
Your pastebin file shows clearly that your system is trying to use Synaptics, not libinut. So my guess does not help you, except if Synaptics is the wrong driver. I think you have a decision here, whether to try to correct the parameters with what you have or change over to libinput. libinput is the way of the future, Synaptics driver will eventually fade away. If you want to keep trying on Synaptics, first step is to run "synclient -l" to get a listing of the parameter it thinks it has now. Almost for sure, it does not know the correct boundaries of the touchpad device itself.
– pauljohn32
Sep 12 '18 at 17:42
Note the OP said goal was to get buttons, but if his xprop output is like yours, I expect that means the settings are not available. In yours, the one to concentrate on is Soft Button Areas, I think. If you change over to libinput, the big difference will be that all of those detail settings disappear. They are dedicated to creating correct for most user config files with the libinputs distribution. Peter Hutterer is the contact point and he was very helpful with fixing many settings. (gitlab.freedesktop.org/libinput/libinput). Unfortunately, links in that page are broken today.
– pauljohn32
Sep 12 '18 at 17:49
add a comment |
I have the same touch pad on a Geo netbook, and I can confirm that installing Ubuntu 18.10 (Cosmic Cuttlefish) solves this issue. From what I can tell it is a result of fixes in the 4.18 kernel, so any distribution with that kernel should work too.
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
add a comment |
You need to install gnome-tweaks to solve this.
Launch Gnome Tweaks, and go to Keyboard & Mouse tab. Change the Mouse Click Emulation setting to AREA.
That should enable the buttons for you.
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1051699%2fubuntu-18-touchpad-buttons-not-working%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
synclient has no effect because Synaptics is not the TouchPad driver on Ubuntu 18.04. Default installs use libinput instead.
Now, what kind of hardware do you have and what do we need to do to enable the buttons? Previous asked for info from X input. That may help.
Why isn't libinput just doing the right thing? More likely issue is your hardware is unfamiliar to libinput and the system is guessing incorrectly on measurements. Your buttons may be under the hand rest. Possible your attempt to config with Synaptics setting makes this worse.
What brand laptop, what model TouchPad?
Oh, does a USB mouse work?
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
Thank you very much for your comment. I opened the bounty, because I have the exact same problem as the OP, even with the same ID (HTIX5288:00 0911:5288 Touchpad) being displayed by xinput. The output of my xinput and ofxinput list-props 15can be found here: pastebin.com/pLnWqKcD . My hardware: Its a Medion Akoya E3222 (see here; unfortunately the webpage is in German: medion.com/aldi/laptops/md62450-sued-de). A USB mouse is working perfectly. I don't know how I can find out the TouchPad model, sorry.
– PhoemueX
Sep 10 '18 at 10:50
Your pastebin file shows clearly that your system is trying to use Synaptics, not libinut. So my guess does not help you, except if Synaptics is the wrong driver. I think you have a decision here, whether to try to correct the parameters with what you have or change over to libinput. libinput is the way of the future, Synaptics driver will eventually fade away. If you want to keep trying on Synaptics, first step is to run "synclient -l" to get a listing of the parameter it thinks it has now. Almost for sure, it does not know the correct boundaries of the touchpad device itself.
– pauljohn32
Sep 12 '18 at 17:42
Note the OP said goal was to get buttons, but if his xprop output is like yours, I expect that means the settings are not available. In yours, the one to concentrate on is Soft Button Areas, I think. If you change over to libinput, the big difference will be that all of those detail settings disappear. They are dedicated to creating correct for most user config files with the libinputs distribution. Peter Hutterer is the contact point and he was very helpful with fixing many settings. (gitlab.freedesktop.org/libinput/libinput). Unfortunately, links in that page are broken today.
– pauljohn32
Sep 12 '18 at 17:49
add a comment |
synclient has no effect because Synaptics is not the TouchPad driver on Ubuntu 18.04. Default installs use libinput instead.
Now, what kind of hardware do you have and what do we need to do to enable the buttons? Previous asked for info from X input. That may help.
Why isn't libinput just doing the right thing? More likely issue is your hardware is unfamiliar to libinput and the system is guessing incorrectly on measurements. Your buttons may be under the hand rest. Possible your attempt to config with Synaptics setting makes this worse.
What brand laptop, what model TouchPad?
Oh, does a USB mouse work?
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
Thank you very much for your comment. I opened the bounty, because I have the exact same problem as the OP, even with the same ID (HTIX5288:00 0911:5288 Touchpad) being displayed by xinput. The output of my xinput and ofxinput list-props 15can be found here: pastebin.com/pLnWqKcD . My hardware: Its a Medion Akoya E3222 (see here; unfortunately the webpage is in German: medion.com/aldi/laptops/md62450-sued-de). A USB mouse is working perfectly. I don't know how I can find out the TouchPad model, sorry.
– PhoemueX
Sep 10 '18 at 10:50
Your pastebin file shows clearly that your system is trying to use Synaptics, not libinut. So my guess does not help you, except if Synaptics is the wrong driver. I think you have a decision here, whether to try to correct the parameters with what you have or change over to libinput. libinput is the way of the future, Synaptics driver will eventually fade away. If you want to keep trying on Synaptics, first step is to run "synclient -l" to get a listing of the parameter it thinks it has now. Almost for sure, it does not know the correct boundaries of the touchpad device itself.
– pauljohn32
Sep 12 '18 at 17:42
Note the OP said goal was to get buttons, but if his xprop output is like yours, I expect that means the settings are not available. In yours, the one to concentrate on is Soft Button Areas, I think. If you change over to libinput, the big difference will be that all of those detail settings disappear. They are dedicated to creating correct for most user config files with the libinputs distribution. Peter Hutterer is the contact point and he was very helpful with fixing many settings. (gitlab.freedesktop.org/libinput/libinput). Unfortunately, links in that page are broken today.
– pauljohn32
Sep 12 '18 at 17:49
add a comment |
synclient has no effect because Synaptics is not the TouchPad driver on Ubuntu 18.04. Default installs use libinput instead.
Now, what kind of hardware do you have and what do we need to do to enable the buttons? Previous asked for info from X input. That may help.
Why isn't libinput just doing the right thing? More likely issue is your hardware is unfamiliar to libinput and the system is guessing incorrectly on measurements. Your buttons may be under the hand rest. Possible your attempt to config with Synaptics setting makes this worse.
What brand laptop, what model TouchPad?
Oh, does a USB mouse work?
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
synclient has no effect because Synaptics is not the TouchPad driver on Ubuntu 18.04. Default installs use libinput instead.
Now, what kind of hardware do you have and what do we need to do to enable the buttons? Previous asked for info from X input. That may help.
Why isn't libinput just doing the right thing? More likely issue is your hardware is unfamiliar to libinput and the system is guessing incorrectly on measurements. Your buttons may be under the hand rest. Possible your attempt to config with Synaptics setting makes this worse.
What brand laptop, what model TouchPad?
Oh, does a USB mouse work?
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
answered Sep 8 '18 at 16:32
pauljohn32pauljohn32
2,4691026
2,4691026
Thank you very much for your comment. I opened the bounty, because I have the exact same problem as the OP, even with the same ID (HTIX5288:00 0911:5288 Touchpad) being displayed by xinput. The output of my xinput and ofxinput list-props 15can be found here: pastebin.com/pLnWqKcD . My hardware: Its a Medion Akoya E3222 (see here; unfortunately the webpage is in German: medion.com/aldi/laptops/md62450-sued-de). A USB mouse is working perfectly. I don't know how I can find out the TouchPad model, sorry.
– PhoemueX
Sep 10 '18 at 10:50
Your pastebin file shows clearly that your system is trying to use Synaptics, not libinut. So my guess does not help you, except if Synaptics is the wrong driver. I think you have a decision here, whether to try to correct the parameters with what you have or change over to libinput. libinput is the way of the future, Synaptics driver will eventually fade away. If you want to keep trying on Synaptics, first step is to run "synclient -l" to get a listing of the parameter it thinks it has now. Almost for sure, it does not know the correct boundaries of the touchpad device itself.
– pauljohn32
Sep 12 '18 at 17:42
Note the OP said goal was to get buttons, but if his xprop output is like yours, I expect that means the settings are not available. In yours, the one to concentrate on is Soft Button Areas, I think. If you change over to libinput, the big difference will be that all of those detail settings disappear. They are dedicated to creating correct for most user config files with the libinputs distribution. Peter Hutterer is the contact point and he was very helpful with fixing many settings. (gitlab.freedesktop.org/libinput/libinput). Unfortunately, links in that page are broken today.
– pauljohn32
Sep 12 '18 at 17:49
add a comment |
Thank you very much for your comment. I opened the bounty, because I have the exact same problem as the OP, even with the same ID (HTIX5288:00 0911:5288 Touchpad) being displayed by xinput. The output of my xinput and ofxinput list-props 15can be found here: pastebin.com/pLnWqKcD . My hardware: Its a Medion Akoya E3222 (see here; unfortunately the webpage is in German: medion.com/aldi/laptops/md62450-sued-de). A USB mouse is working perfectly. I don't know how I can find out the TouchPad model, sorry.
– PhoemueX
Sep 10 '18 at 10:50
Your pastebin file shows clearly that your system is trying to use Synaptics, not libinut. So my guess does not help you, except if Synaptics is the wrong driver. I think you have a decision here, whether to try to correct the parameters with what you have or change over to libinput. libinput is the way of the future, Synaptics driver will eventually fade away. If you want to keep trying on Synaptics, first step is to run "synclient -l" to get a listing of the parameter it thinks it has now. Almost for sure, it does not know the correct boundaries of the touchpad device itself.
– pauljohn32
Sep 12 '18 at 17:42
Note the OP said goal was to get buttons, but if his xprop output is like yours, I expect that means the settings are not available. In yours, the one to concentrate on is Soft Button Areas, I think. If you change over to libinput, the big difference will be that all of those detail settings disappear. They are dedicated to creating correct for most user config files with the libinputs distribution. Peter Hutterer is the contact point and he was very helpful with fixing many settings. (gitlab.freedesktop.org/libinput/libinput). Unfortunately, links in that page are broken today.
– pauljohn32
Sep 12 '18 at 17:49
Thank you very much for your comment. I opened the bounty, because I have the exact same problem as the OP, even with the same ID (HTIX5288:00 0911:5288 Touchpad) being displayed by xinput. The output of my xinput and of
xinput list-props 15 can be found here: pastebin.com/pLnWqKcD . My hardware: Its a Medion Akoya E3222 (see here; unfortunately the webpage is in German: medion.com/aldi/laptops/md62450-sued-de). A USB mouse is working perfectly. I don't know how I can find out the TouchPad model, sorry.– PhoemueX
Sep 10 '18 at 10:50
Thank you very much for your comment. I opened the bounty, because I have the exact same problem as the OP, even with the same ID (HTIX5288:00 0911:5288 Touchpad) being displayed by xinput. The output of my xinput and of
xinput list-props 15 can be found here: pastebin.com/pLnWqKcD . My hardware: Its a Medion Akoya E3222 (see here; unfortunately the webpage is in German: medion.com/aldi/laptops/md62450-sued-de). A USB mouse is working perfectly. I don't know how I can find out the TouchPad model, sorry.– PhoemueX
Sep 10 '18 at 10:50
Your pastebin file shows clearly that your system is trying to use Synaptics, not libinut. So my guess does not help you, except if Synaptics is the wrong driver. I think you have a decision here, whether to try to correct the parameters with what you have or change over to libinput. libinput is the way of the future, Synaptics driver will eventually fade away. If you want to keep trying on Synaptics, first step is to run "synclient -l" to get a listing of the parameter it thinks it has now. Almost for sure, it does not know the correct boundaries of the touchpad device itself.
– pauljohn32
Sep 12 '18 at 17:42
Your pastebin file shows clearly that your system is trying to use Synaptics, not libinut. So my guess does not help you, except if Synaptics is the wrong driver. I think you have a decision here, whether to try to correct the parameters with what you have or change over to libinput. libinput is the way of the future, Synaptics driver will eventually fade away. If you want to keep trying on Synaptics, first step is to run "synclient -l" to get a listing of the parameter it thinks it has now. Almost for sure, it does not know the correct boundaries of the touchpad device itself.
– pauljohn32
Sep 12 '18 at 17:42
Note the OP said goal was to get buttons, but if his xprop output is like yours, I expect that means the settings are not available. In yours, the one to concentrate on is Soft Button Areas, I think. If you change over to libinput, the big difference will be that all of those detail settings disappear. They are dedicated to creating correct for most user config files with the libinputs distribution. Peter Hutterer is the contact point and he was very helpful with fixing many settings. (gitlab.freedesktop.org/libinput/libinput). Unfortunately, links in that page are broken today.
– pauljohn32
Sep 12 '18 at 17:49
Note the OP said goal was to get buttons, but if his xprop output is like yours, I expect that means the settings are not available. In yours, the one to concentrate on is Soft Button Areas, I think. If you change over to libinput, the big difference will be that all of those detail settings disappear. They are dedicated to creating correct for most user config files with the libinputs distribution. Peter Hutterer is the contact point and he was very helpful with fixing many settings. (gitlab.freedesktop.org/libinput/libinput). Unfortunately, links in that page are broken today.
– pauljohn32
Sep 12 '18 at 17:49
add a comment |
I have the same touch pad on a Geo netbook, and I can confirm that installing Ubuntu 18.10 (Cosmic Cuttlefish) solves this issue. From what I can tell it is a result of fixes in the 4.18 kernel, so any distribution with that kernel should work too.
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
add a comment |
I have the same touch pad on a Geo netbook, and I can confirm that installing Ubuntu 18.10 (Cosmic Cuttlefish) solves this issue. From what I can tell it is a result of fixes in the 4.18 kernel, so any distribution with that kernel should work too.
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
add a comment |
I have the same touch pad on a Geo netbook, and I can confirm that installing Ubuntu 18.10 (Cosmic Cuttlefish) solves this issue. From what I can tell it is a result of fixes in the 4.18 kernel, so any distribution with that kernel should work too.
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
I have the same touch pad on a Geo netbook, and I can confirm that installing Ubuntu 18.10 (Cosmic Cuttlefish) solves this issue. From what I can tell it is a result of fixes in the 4.18 kernel, so any distribution with that kernel should work too.
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
answered Feb 22 at 9:46
Ian TurtonIan Turton
1013
1013
add a comment |
add a comment |
You need to install gnome-tweaks to solve this.
Launch Gnome Tweaks, and go to Keyboard & Mouse tab. Change the Mouse Click Emulation setting to AREA.
That should enable the buttons for you.
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
add a comment |
You need to install gnome-tweaks to solve this.
Launch Gnome Tweaks, and go to Keyboard & Mouse tab. Change the Mouse Click Emulation setting to AREA.
That should enable the buttons for you.
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
add a comment |
You need to install gnome-tweaks to solve this.
Launch Gnome Tweaks, and go to Keyboard & Mouse tab. Change the Mouse Click Emulation setting to AREA.
That should enable the buttons for you.
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
You need to install gnome-tweaks to solve this.
Launch Gnome Tweaks, and go to Keyboard & Mouse tab. Change the Mouse Click Emulation setting to AREA.
That should enable the buttons for you.
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
answered Feb 22 at 12:34
Kamil KhanKamil Khan
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1051699%2fubuntu-18-touchpad-buttons-not-working%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Does this answer work askubuntu.com/a/1067292/790920 ?
– abu_bua
Aug 25 '18 at 15:18
Hi, Martin what's the output of
xinput list-props 10? you may want to look at Capabilities property or maybe other you may find relevant. You can use this page as reference– aasril
Sep 8 '18 at 1:41