Cfrgtkky

I am at my wit's end trying to debug a hard fault on an EFR32BG12 processor. I've been following the instructions in the Silicon Labs knowledge base here:

https://www.silabs.com/community/mcu/32-bit/knowledge-base.entry.html/2014/05/26/debug_a_hardfault-78gc

I've also been using the Keil app note here to fill in some details:

http://www.keil.com/appnotes/files/apnt209.pdf

I've managed to get the hard fault to occur quite consistently in one place. When the hard fault occurs, the code from the knowledge base article gives me the following values (pushed onto the stack by the processor before calling the hard fault handler):

Name     Type        Value               Location

~~~~     ~~~~        ~~~~~               ~~~~~~~~

cfsr     uint32_t    0x20000 (Hex)       0x2000078c    

hfsr     uint32_t    0x40000000 (Hex)    0x20000788    

mmfar    uint32_t    0xe000ed34 (Hex)    0x20000784    

bfar     uint32_t    0xe000ed38 (Hex)    0x20000780    

r0       uint32_t    0x0 (Hex)           0x2000077c    

r1       uint32_t    0x8 (Hex)           0x20000778    

r2       uint32_t    0x0 (Hex)           0x20000774    

r3       uint32_t    0x0 (Hex)           0x20000770    

r12      uint32_t    0x1 (Hex)           0x2000076c    

lr       uint32_t    0xab61 (Hex)        0x20000768    

pc       uint32_t    0x38dc8 (Hex)       0x20000764    

psr      uint32_t    0x0 (Hex)           0x20000760  

Looking at the Keil app note, I believe a CFSR value of 0x20000 indicates a Usage Fault with the INVSTATE bit set, i.e.:

INVSTATE: Invalid state: 0 = no invalid state 1 = the processor has
attempted to execute an instruction that makes illegal use of the
Execution Program Status Register (EPSR). When this bit is set, the PC
value stacked for the exception return points to the instruction that
attempted the illegal use of the EPSR. Potential reasons: a) Loading a
branch target address to PC with LSB=0. b) Stacked PSR corrupted
during exception or interrupt handling. c) Vector table contains a
vector address with LSB=0.

The PC value pushed onto the stack by the exception (provided by the code from the knowledge base article) seems to be 0x38dc8. If I go to this address in the Simplicity Studio "Disassembly" window, I see the following:

00038db8:   str     r5,[r5,#0x14]

00038dba:   str     r0,[r7,r1]

00038dbc:   str     r4,[r5,#0x14]

00038dbe:   ldr     r4,[pc,#0x1e4] ; 0x38fa0

00038dc0:   strb    r1,[r4,#0x11]

00038dc2:   ldr     r5,[r4,#0x64]

00038dc4:   ldrb    r3,[r4,#0x5]

00038dc6:   movs    r3,r6

00038dc8:   strb    r1,[r4,#0x15]

00038dca:   ldr     r4,[r4,#0x14]

00038dcc:   cmp     r7,#0x6f

00038dce:   cmp     r6,#0x30

00038dd0:   str     r7,[r6,#0x14]

00038dd2:   lsls    r6,r6,#1

00038dd4:   movs    r5,r0

00038dd6:   movs    r0,r0

The address appears to be well past the end of my code. If I look at the same address in the "Memory" window, this is what I see:

0x00038DC8  69647561 2E302F6F 00766177 00000005  audio/0.wav.....

0x00038DD8  00000000 000F4240 00000105 00000000  ....@B..........

0x00038DE8  00000000 00000000 00000005 00000000  ................

0x00038DF8  0001C200 00000500 00001000 00000000  .Â..............

0x00038E08  00000000 F00000F0 02F00001 0003F000  ....ð..ð..ð..ð..

0x00038E18  F00004F0 06010005 01020101 01011201  ð..ð............

0x00038E28  35010121 01010D01 6C363025 2E6E6775  !..5....%06lugn.

0x00038E38  00746164 00000001 000008D0 00038400  dat.....Ð.......

Curiously, "audio/0.wav" is a static string which is part of the firmware. If I understand correctly, what I've learned here is that PC somehow gets set to this point in memory, which of course is not a valid instruction and causes the hard fault.

To debug the issue, I need to know how PC came to be set to this incorrect value. I believe the LR register should give me an idea. The LR register pushed onto the stack by the exception seems to be 0xab61. If I look at this location, I see the following in the Disassembly window:

1270            dp->sect = clst2sect(fs, clst);

0000ab58:   ldr     r0,[r7,#0x10]

0000ab5a:   ldr     r1,[r7,#0x14]

0000ab5c:   bl      0x00009904

0000ab60:   mov     r2,r0

0000ab62:   ldr     r3,[r7,#0x4]

0000ab64:   str     r2,[r3,#0x18]

It looks to me like the problem occurs during this call specifically:

0000ab5c:   bl      0x00009904

This makes me think that the problem occurs as a result of a corrupt stack, which causes clst2sect to return to an invalid part of memory rather than to 0xab60. The code for clst2sect is pretty innocuous:

/*-----------------------------------------------------------------------*/

/* Get physical sector number from cluster number                        */

/*-----------------------------------------------------------------------*/



DWORD clst2sect (   /* !=0:Sector number, 0:Failed (invalid cluster#) */

    FATFS* fs,      /* Filesystem object */

    DWORD clst      /* Cluster# to be converted */

)

{

    clst -= 2;      /* Cluster number is origin from 2 */

    if (clst >= fs->n_fatent - 2) return 0;     /* Is it invalid cluster number? */

    return fs->database + fs->csize * clst;     /* Start sector number of the cluster */

}

Does this analysis sound about right?

I suppose the problem I've run into is that I have no idea what might cause this kind of behaviour... I've tried putting breakpoints in all of my interrupt handlers, to see if one of them might be corrupting the stack, but there doesn't seem to be any pattern--sometimes, no interrupt handler is called but the problem still occurs.

In that case, though, it's hard for me to see how a program might try to execute code at a location well past the actual end of the code... I feel like a function pointer might be a likely candidate, but in that case I would expect to see the problem show up, e.g., where a function pointer is used. However, I don't see any function pointers used near where the error is occurring.

Perhaps there is more information I can extract from the debug information I've given above? The problem is quite reproducible, so if there's something I have not tried, but which you think might give some insight, I would love to hear it.

Thanks for any help you can offer!

After about a month of chasing this one, I managed to identify the cause of the problem. I hope I can give enough information here that this will be useful to someone else.

In the end, the problem was caused by passing a pointer to a non-static local variable to a state machine which changed the value at that memory location later on. Because the local variable was no longer in scope, that memory location was a random point in the stack, and changing the value there corrupted the stack.

The problem was difficult to track down for two reasons:

1. Depending on how the code compiled, the changed memory location could be something non-critical like another local variable, which would cause a much more subtle error. Only when I got lucky would the change affect the PC register and cause a hard fault.




2. Even when I found a version of the code that consistently generated a hard fault, the actual hard fault typically occurred somewhere up the call stack, when a function returned and popped the stack value into PC. This made it difficult to identify the cause of the problem--all I knew was that something was corrupting the stack before that function return.

A few tools were really helpful in identifying the cause of the problem:

1. Early on, I had identified a block of code where the hard fault usually occurred using GPIO pins. I would toggle a pin high before entering the block and low when exiting the block. Then I performed many tests, checking if the pin was high or low when the hard fault occurred, and used a sort of binary search to determine the smallest block of code which consistently contained all the hard faults.




2. The hard fault pushes a number of important registers onto the stack. These helped me confirm where the PC register was becoming corrupt, and also helped me understand that it was becoming corrupt as a result of a stack corruption.




3. Starting somewhere before that block of code and stepping forward while keeping an eye on local variables, I was able to identify a function call that was corrupting the stack. I could confirm this using Simplicity Studio's memory view.




4. Finally, stepping through the offending function in detail, I realized that the problem was occurring when I dereferenced a stored pointer and wrote to that memory location. Looking back at where that pointer value was set, I realized it had been set to point to a non-static local variable that was now out of scope.

Thanks to @SeanHoulihane and @cooperised, who helped me eliminate a few possible causes and gave me a little more confidence with the debugging tools.