A Roman-technology clock run by slaves - how to make it accurate












5















In a land similar to the Roman Empire, slaves are used to drive machinery. Mostly this is a matter of getting them to pull carts or wind handles.



The Emperor wants a clock that is accurate to the minute, powered by slaves.



With the technology of Ancient Rome and unlimited slave-power, how can such a clock be accurately regulated?



Let us suppose that the clock has a face similar to a modern-day analog clock.




Notes



The clock cannot be regulated by referring to another clock. It must be self-regulating.



Water power, sand-timers, wound-springs etc. are not to be used directly to power the clock - just slave manual power. However an (unpowered?) mechanism will be need to regulate the machine.






technology ancient-history time-keeping







share|improve this question




















  • 10





    The Romans had clocks. Water clocks, sand clocks, weight driven clocks, burning clocks. The power required by a clock movement is trivial -- you don't need a slave, you need a small mouse. What they didn't have was enough knowledge of physics to make an accurate clock. They did not know about isochronous oscillations. The question is about the wrong problem.

    – AlexP
    Jan 3 at 15:42








  • 3





    If it was actually considered a clock and usable on cloudy days, I'd add an answer about training the slaves to stand in a Gnomon pattern (think cheerleaders) and make a sundial

    – JGreenwell
    Jan 3 at 16:07






  • 2





    Dear downvoters: the question isn't about Rome per se, it's about a Rome-like (Romanesque!) fictional world. It does not matter what the real Romans knew or didn't know. The only issue here, for us, is how to get these other Romans to make their slave clock run regular.

    – elemtilas
    Jan 3 at 18:10






  • 2





    If its just a show of wealth, why not have a real clock somewhere, and then just have the slaves move the hands of a giant 500m display clock, to match the time on the smaller real clock. Accurate time, and needless show of wealth and power achieved.

    – Tyler S. Loeper
    Jan 3 at 18:31








  • 3





    Note that the Romans divided the day into 12 hours -- meaning the length of an hour varied from day to day.

    – Abigail
    Jan 3 at 20:54
















5















In a land similar to the Roman Empire, slaves are used to drive machinery. Mostly this is a matter of getting them to pull carts or wind handles.



The Emperor wants a clock that is accurate to the minute, powered by slaves.



With the technology of Ancient Rome and unlimited slave-power, how can such a clock be accurately regulated?



Let us suppose that the clock has a face similar to a modern-day analog clock.




Notes



The clock cannot be regulated by referring to another clock. It must be self-regulating.



Water power, sand-timers, wound-springs etc. are not to be used directly to power the clock - just slave manual power. However an (unpowered?) mechanism will be need to regulate the machine.






technology ancient-history time-keeping







share|improve this question




















  • 10





    The Romans had clocks. Water clocks, sand clocks, weight driven clocks, burning clocks. The power required by a clock movement is trivial -- you don't need a slave, you need a small mouse. What they didn't have was enough knowledge of physics to make an accurate clock. They did not know about isochronous oscillations. The question is about the wrong problem.

    – AlexP
    Jan 3 at 15:42








  • 3





    If it was actually considered a clock and usable on cloudy days, I'd add an answer about training the slaves to stand in a Gnomon pattern (think cheerleaders) and make a sundial

    – JGreenwell
    Jan 3 at 16:07






  • 2





    Dear downvoters: the question isn't about Rome per se, it's about a Rome-like (Romanesque!) fictional world. It does not matter what the real Romans knew or didn't know. The only issue here, for us, is how to get these other Romans to make their slave clock run regular.

    – elemtilas
    Jan 3 at 18:10






  • 2





    If its just a show of wealth, why not have a real clock somewhere, and then just have the slaves move the hands of a giant 500m display clock, to match the time on the smaller real clock. Accurate time, and needless show of wealth and power achieved.

    – Tyler S. Loeper
    Jan 3 at 18:31








  • 3





    Note that the Romans divided the day into 12 hours -- meaning the length of an hour varied from day to day.

    – Abigail
    Jan 3 at 20:54














5












5








5








In a land similar to the Roman Empire, slaves are used to drive machinery. Mostly this is a matter of getting them to pull carts or wind handles.



The Emperor wants a clock that is accurate to the minute, powered by slaves.



With the technology of Ancient Rome and unlimited slave-power, how can such a clock be accurately regulated?



Let us suppose that the clock has a face similar to a modern-day analog clock.




Notes



The clock cannot be regulated by referring to another clock. It must be self-regulating.



Water power, sand-timers, wound-springs etc. are not to be used directly to power the clock - just slave manual power. However an (unpowered?) mechanism will be need to regulate the machine.






technology ancient-history time-keeping







share|improve this question
















In a land similar to the Roman Empire, slaves are used to drive machinery. Mostly this is a matter of getting them to pull carts or wind handles.



The Emperor wants a clock that is accurate to the minute, powered by slaves.



With the technology of Ancient Rome and unlimited slave-power, how can such a clock be accurately regulated?



Let us suppose that the clock has a face similar to a modern-day analog clock.




Notes



The clock cannot be regulated by referring to another clock. It must be self-regulating.



Water power, sand-timers, wound-springs etc. are not to be used directly to power the clock - just slave manual power. However an (unpowered?) mechanism will be need to regulate the machine.






technology ancient-history time-keeping




technology ancient-history time-keeping






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Jan 3 at 15:29







chasly from UK

















asked Jan 3 at 15:22









chasly from UKchasly from UK

13.1k359121




13.1k359121








  • 10





    The Romans had clocks. Water clocks, sand clocks, weight driven clocks, burning clocks. The power required by a clock movement is trivial -- you don't need a slave, you need a small mouse. What they didn't have was enough knowledge of physics to make an accurate clock. They did not know about isochronous oscillations. The question is about the wrong problem.

    – AlexP
    Jan 3 at 15:42








  • 3





    If it was actually considered a clock and usable on cloudy days, I'd add an answer about training the slaves to stand in a Gnomon pattern (think cheerleaders) and make a sundial

    – JGreenwell
    Jan 3 at 16:07






  • 2





    Dear downvoters: the question isn't about Rome per se, it's about a Rome-like (Romanesque!) fictional world. It does not matter what the real Romans knew or didn't know. The only issue here, for us, is how to get these other Romans to make their slave clock run regular.

    – elemtilas
    Jan 3 at 18:10






  • 2





    If its just a show of wealth, why not have a real clock somewhere, and then just have the slaves move the hands of a giant 500m display clock, to match the time on the smaller real clock. Accurate time, and needless show of wealth and power achieved.

    – Tyler S. Loeper
    Jan 3 at 18:31








  • 3





    Note that the Romans divided the day into 12 hours -- meaning the length of an hour varied from day to day.

    – Abigail
    Jan 3 at 20:54














  • 10





    The Romans had clocks. Water clocks, sand clocks, weight driven clocks, burning clocks. The power required by a clock movement is trivial -- you don't need a slave, you need a small mouse. What they didn't have was enough knowledge of physics to make an accurate clock. They did not know about isochronous oscillations. The question is about the wrong problem.

    – AlexP
    Jan 3 at 15:42








  • 3





    If it was actually considered a clock and usable on cloudy days, I'd add an answer about training the slaves to stand in a Gnomon pattern (think cheerleaders) and make a sundial

    – JGreenwell
    Jan 3 at 16:07






  • 2





    Dear downvoters: the question isn't about Rome per se, it's about a Rome-like (Romanesque!) fictional world. It does not matter what the real Romans knew or didn't know. The only issue here, for us, is how to get these other Romans to make their slave clock run regular.

    – elemtilas
    Jan 3 at 18:10






  • 2





    If its just a show of wealth, why not have a real clock somewhere, and then just have the slaves move the hands of a giant 500m display clock, to match the time on the smaller real clock. Accurate time, and needless show of wealth and power achieved.

    – Tyler S. Loeper
    Jan 3 at 18:31








  • 3





    Note that the Romans divided the day into 12 hours -- meaning the length of an hour varied from day to day.

    – Abigail
    Jan 3 at 20:54








10




10





The Romans had clocks. Water clocks, sand clocks, weight driven clocks, burning clocks. The power required by a clock movement is trivial -- you don't need a slave, you need a small mouse. What they didn't have was enough knowledge of physics to make an accurate clock. They did not know about isochronous oscillations. The question is about the wrong problem.

– AlexP
Jan 3 at 15:42







The Romans had clocks. Water clocks, sand clocks, weight driven clocks, burning clocks. The power required by a clock movement is trivial -- you don't need a slave, you need a small mouse. What they didn't have was enough knowledge of physics to make an accurate clock. They did not know about isochronous oscillations. The question is about the wrong problem.

– AlexP
Jan 3 at 15:42






3




3





If it was actually considered a clock and usable on cloudy days, I'd add an answer about training the slaves to stand in a Gnomon pattern (think cheerleaders) and make a sundial

– JGreenwell
Jan 3 at 16:07





If it was actually considered a clock and usable on cloudy days, I'd add an answer about training the slaves to stand in a Gnomon pattern (think cheerleaders) and make a sundial

– JGreenwell
Jan 3 at 16:07




2




2





Dear downvoters: the question isn't about Rome per se, it's about a Rome-like (Romanesque!) fictional world. It does not matter what the real Romans knew or didn't know. The only issue here, for us, is how to get these other Romans to make their slave clock run regular.

– elemtilas
Jan 3 at 18:10





Dear downvoters: the question isn't about Rome per se, it's about a Rome-like (Romanesque!) fictional world. It does not matter what the real Romans knew or didn't know. The only issue here, for us, is how to get these other Romans to make their slave clock run regular.

– elemtilas
Jan 3 at 18:10




2




2





If its just a show of wealth, why not have a real clock somewhere, and then just have the slaves move the hands of a giant 500m display clock, to match the time on the smaller real clock. Accurate time, and needless show of wealth and power achieved.

– Tyler S. Loeper
Jan 3 at 18:31







If its just a show of wealth, why not have a real clock somewhere, and then just have the slaves move the hands of a giant 500m display clock, to match the time on the smaller real clock. Accurate time, and needless show of wealth and power achieved.

– Tyler S. Loeper
Jan 3 at 18:31






3




3





Note that the Romans divided the day into 12 hours -- meaning the length of an hour varied from day to day.

– Abigail
Jan 3 at 20:54





Note that the Romans divided the day into 12 hours -- meaning the length of an hour varied from day to day.

– Abigail
Jan 3 at 20:54










5 Answers
5






active

oldest

votes


















10





+500









One possibility would be this set-up, all components being available to your parallel world Roman Imperials:



Component I: is the temporal regulation mechanism. Deep within the works of the Horologon, is a water cistern that is kept full from municipal water supplies (the Aqueduct). Pipes bring water down to a valve that is set by the engineers to flow at a certain rate. The water itself is brought up into a marble statue of a water nymph and is ejected from her left nipple at a constant rate. The water so ejected squirts onto a small water wheel which thus rotates at a constant rate. Two of the water wheel's buckets have projections that strike a small brass chime held by a bronze satyr at the wheel's base.



Component II: is the slave regulating mechanism. This component consists of a slave, two wooden mallets and two bronze nakers (a kind of drum). The slave, taking his cues from the satyr's chime, beats out a lively rhythm on the nakers which will regulate the slaves that actually operate the horologon itself. The rhythms vary by the hour, and close attention paid by passersby will immediately tell them, just by listening, what the hour is, even if they don't look up at the horologon's clever display.



Component III: are the slave tableaus. This is all part of the magic of Romanesque time keeping: the day being divided into fifteen hours of the clock, based on the calculated number of chime beats on Midsummer's day, there are therefore fifteen tableaux visible on the horologon's portico. The figures in each tableau are dressed in characteristic fashion of a particular region of the Empire and the slaves in each tableau dance in a fashion characteristic of that region. Other slaves, the tempora magistri, or "conductors", beat time along with the nakers by tapping their feet and striking the floor of the portico with their batons. Baton strikes are carefully counted and choreographed with the rhythms of the nakers to occur every half minute, first one strike then a double-strike. Every minute, or every double-strike of the conductors' baton therefore denotes one minute. At this moment, the tableau advances slightly around the portico.



Component IIIJ: is the horologon's display. Resting upon a great toothed rondel of hard wood at the centre of the tableau is a similarly toothed rondel from which radiates fifteen long spars with red legionary shields at the end of each, upon which are painted large numbers: J, IJ, IIJ, IIIJ, etc. up to XV.



Component V: is the housing. Naturally, the Emperor wishes to help the people of the Eternal City tell time, else why build a public horologon at all? But more importantly, he wishes to make a grand and opulent public display of the whole matter. Sure, any Marcus Aurelius in the street can look up at the Sun and say, oh, it's a little after noon. But the Emperor wants to make sure that not only his own subjects, but also traders from distant lands and embassies from rival empires and visiting dignitaries alike are awed by the cunning engineering and obviously vast wealth of the Empire. To do this, the entire horologon is housed within a marble temple like building, perhaps on the end of one of the basilicas. The beauty of its painted statuary and mythological stonework is a feast for the eyes; and all eyes will be drawn to the huge arched skene, the stage where the tableaux play out.



Component VJ: is the general orchestration of the horologon. All well and good, but how does one actually tell time? Quite simply, if one is sufficiently literate, one can simply read the numbers on the dial. As the big XIJ moves across the stage, you know it's twelve o'clock. If you're clever and you notice the evenly spaced markings along the base of the stage, you'll see that each time the conductor double-strikes his baton, the cartouche moves from one marking to the next. And, again, if you're literate, you'll notice that these markings are labelled: prima, secunda, tertia, etc. The big numbers indicate hours of the clock, the small numbers indicate minutes.



But the wise observer will note the horologon does much more than count minutes and hours. Indeed, the wise Emperor has devised the tableaux in such a way that each set of costumes and each set of dances is constantly changed over the course of time. Every day, the timed syllable chanting of the slaves, with its calculated number of syllables per line & strophe, corresponding to the passage of minutes, changes -- one day, hymns to the Moon or the Stars or to Istar or Ares; every two weeks, the dances change slightly and every month the costumes change as well. Every three months, the over-arching theme changes. Thus, the observant student of the imperial horologon can tell you what day, what hour and minute and in what fortnight and season you are currently in, all by observing and listening to what the horlogon of Emperor Minimus is telling!






share|improve this answer


























  • This is how the Remans in my own world went about it, anyway!

    – elemtilas
    Jan 3 at 19:23






  • 4





    When you remove the gilded lilly, what's left of this answer is remarkably simple and, IMHO, the best answser. The slaves keep a cistern filled with water. The sistern can be made of a central, deep column and a larger, wider bowl at the top so the pressure remains reasonably constant while the water level shifts up and down with human error. The result is a constant and predictable flow of water that can be used to drive gearing of any complexity known to the Romans and easily calibrated to any desired timekeeping condition. Boom, baby. Well done Elemtilas.

    – JBH
    Jan 3 at 20:40






  • 1





    Thank you much, @JBH! I, of course, appreciate the gilded lily aspect of this answer. The "clock" proper is simply constant water flow and a chime to help the human mind keep track of the time factor with respect to water flow. But, hey, this is Rome! And wealthy Romans thrive on opulent displays of wealth and power! Plus, I needed something for all the slaves to occupy their time.

    – elemtilas
    Jan 3 at 21:04








  • 1





    @Eth, that doesn't make any sense. Water pressure is simply the amount of water above a point. If a big box or bowl existed above the column, any water not directly over the column wouldn't contribute to water pressure at the base of the column. By maximizing surface area vs. column volume, you avoid the need for the water delivery precision - which is the point. Without a spring to create a primitive pressure regulator it's the best accuracy-vs-complexity trade-off.

    – JBH
    Jan 4 at 15:00






  • 2





    If your cistern has a overflow at the top you can precisely maintain the water column height, and therefore pressure without any complex regulators.

    – Corbin Matheson
    Jan 4 at 15:17



















7














With a pendulum



The quirk being that neither the pendulum nor the need for accurate time keeping had been invented in the period you're asking for, but gearing was already in use, the basic physics of a pendulum regulator could follow well enough.






share|improve this answer


























  • I'm not sure how they make the pendulum swing regularly. Surely a slave would have to push it. That is subject to error. Do you have a reference that indicates how the Romans were using gearing - that sounds interesting.

    – chasly from UK
    Jan 3 at 15:31








  • 1





    @chaslyfromUK, the source you're looking for for gears is the Antikythera mechanism this could be the work of a lone raving genius, but it shows the principle of gears was known in the period.

    – Separatrix
    Jan 3 at 15:40






  • 2





    @chaslyfromUK: In 1602 Galileo discovered that the period of oscillation of a pendulum is almost independent of the amplitude of the oscillations, as long as the oscillations are small. You don't need to do anything for the pendulum to swing regularly -- it does that all by itself. The small power input is needed to compensate for energy loss due to friction in the mechanism. A large grandfather clock uses about 0.1 milliwatts of power. A huge tower clock uses about 100 milliwatts for the clock movement.

    – AlexP
    Jan 3 at 16:03








  • 2





    Two pendulums (pendula?). When one needs to be pushed, it is later synchronized to the other. When the other needs to be pushed, the process is repeated.

    – David Schwartz
    Jan 3 at 23:43








  • 2





    @Separatrix - I get you - of course the fictional emperor who wanted the accurate clock could have had his greatest philosophers research the idea and it would not be beyond the bounds of possibility that they could discover a pendulum ahead of (real-life) time...

    – colmde
    Jan 4 at 9:50





















6















  • Have the slaves build a large wheel, with an even number of carts evenly spread around it and a clear mark on it.


  • Have the wheel installed with an horizontal axis, free of spinning.


  • Have the slaves cut a number of stones, all from the same mine, all with the same shape and weight.


  • Have the slaves carry the stones to the top of the wheel, where they will put one stone in each cart reaching the top.


  • Have the slaves take away the stone from the cart when it reaches the bottom and carry the stone to the top.


  • Define every round trip of the mark on the wheel your base time unit.







share|improve this answer



















  • 1





    That is interesting - I like it. How would you prevent slaves putting stones onto the wheel too soon or too late?

    – chasly from UK
    Jan 3 at 15:43











  • @chaslyfromUK, mechanical safety or slave supervisors equipped with whips

    – L.Dutch♦
    Jan 3 at 15:46






  • 7





    I read it as "an even number of cats" which makes a good answer even better.

    – user535733
    Jan 3 at 17:05






  • 1





    This machine works only against the friction in the wheel axis. After a day it will become faster or slower, depending on the wear.

    – Karl
    Jan 3 at 18:17






  • 1





    A neat idea but doesn't seem like it would be very accuracte. The moment you switch slaves, their speed, carrying capacity, etc would change, as would there performance at different energy levels (fresh/tired/hungry/sleep deprived). But the real problem is the absurd limitations of the question.

    – Tyler S. Loeper
    Jan 3 at 18:29





















2














With the mention of the analogue face, I'm going to assume they have a decent grasp of gearing. From there you need to control the speed that the slaves are rotating, for that you can use a simplified centrifuge governor.



centrifuge governor



Attach an arrow to the flyweights and have them point to a sweetspot chart and you could maintain a somewhat accurate fixed rotation speed.






share|improve this answer
























  • So, basically, replace flyballs d(sub-b) and h(sub-s) with equally weighted slaves...

    – elemtilas
    Jan 3 at 18:12











  • nah, rig it so if the slaves don't get the flyballs spinning fast enough, the flyballs his levers that cause whips to auto-lash the slaves pushing the main drive wheel.

    – Corbin Matheson
    Jan 3 at 18:26



















1














You build a release for polished, uniform stones on the top of a slope or fall, which is triggered by the stones hitting the ground.






share|improve this answer























    Your Answer





    StackExchange.ifUsing("editor", function () {
    return StackExchange.using("mathjaxEditing", function () {
    StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
    StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
    });
    });
    }, "mathjax-editing");

    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "579"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    noCode: true, onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fworldbuilding.stackexchange.com%2fquestions%2f135487%2fa-roman-technology-clock-run-by-slaves-how-to-make-it-accurate%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    5 Answers
    5






    active

    oldest

    votes








    5 Answers
    5






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    10





    +500









    One possibility would be this set-up, all components being available to your parallel world Roman Imperials:



    Component I: is the temporal regulation mechanism. Deep within the works of the Horologon, is a water cistern that is kept full from municipal water supplies (the Aqueduct). Pipes bring water down to a valve that is set by the engineers to flow at a certain rate. The water itself is brought up into a marble statue of a water nymph and is ejected from her left nipple at a constant rate. The water so ejected squirts onto a small water wheel which thus rotates at a constant rate. Two of the water wheel's buckets have projections that strike a small brass chime held by a bronze satyr at the wheel's base.



    Component II: is the slave regulating mechanism. This component consists of a slave, two wooden mallets and two bronze nakers (a kind of drum). The slave, taking his cues from the satyr's chime, beats out a lively rhythm on the nakers which will regulate the slaves that actually operate the horologon itself. The rhythms vary by the hour, and close attention paid by passersby will immediately tell them, just by listening, what the hour is, even if they don't look up at the horologon's clever display.



    Component III: are the slave tableaus. This is all part of the magic of Romanesque time keeping: the day being divided into fifteen hours of the clock, based on the calculated number of chime beats on Midsummer's day, there are therefore fifteen tableaux visible on the horologon's portico. The figures in each tableau are dressed in characteristic fashion of a particular region of the Empire and the slaves in each tableau dance in a fashion characteristic of that region. Other slaves, the tempora magistri, or "conductors", beat time along with the nakers by tapping their feet and striking the floor of the portico with their batons. Baton strikes are carefully counted and choreographed with the rhythms of the nakers to occur every half minute, first one strike then a double-strike. Every minute, or every double-strike of the conductors' baton therefore denotes one minute. At this moment, the tableau advances slightly around the portico.



    Component IIIJ: is the horologon's display. Resting upon a great toothed rondel of hard wood at the centre of the tableau is a similarly toothed rondel from which radiates fifteen long spars with red legionary shields at the end of each, upon which are painted large numbers: J, IJ, IIJ, IIIJ, etc. up to XV.



    Component V: is the housing. Naturally, the Emperor wishes to help the people of the Eternal City tell time, else why build a public horologon at all? But more importantly, he wishes to make a grand and opulent public display of the whole matter. Sure, any Marcus Aurelius in the street can look up at the Sun and say, oh, it's a little after noon. But the Emperor wants to make sure that not only his own subjects, but also traders from distant lands and embassies from rival empires and visiting dignitaries alike are awed by the cunning engineering and obviously vast wealth of the Empire. To do this, the entire horologon is housed within a marble temple like building, perhaps on the end of one of the basilicas. The beauty of its painted statuary and mythological stonework is a feast for the eyes; and all eyes will be drawn to the huge arched skene, the stage where the tableaux play out.



    Component VJ: is the general orchestration of the horologon. All well and good, but how does one actually tell time? Quite simply, if one is sufficiently literate, one can simply read the numbers on the dial. As the big XIJ moves across the stage, you know it's twelve o'clock. If you're clever and you notice the evenly spaced markings along the base of the stage, you'll see that each time the conductor double-strikes his baton, the cartouche moves from one marking to the next. And, again, if you're literate, you'll notice that these markings are labelled: prima, secunda, tertia, etc. The big numbers indicate hours of the clock, the small numbers indicate minutes.



    But the wise observer will note the horologon does much more than count minutes and hours. Indeed, the wise Emperor has devised the tableaux in such a way that each set of costumes and each set of dances is constantly changed over the course of time. Every day, the timed syllable chanting of the slaves, with its calculated number of syllables per line & strophe, corresponding to the passage of minutes, changes -- one day, hymns to the Moon or the Stars or to Istar or Ares; every two weeks, the dances change slightly and every month the costumes change as well. Every three months, the over-arching theme changes. Thus, the observant student of the imperial horologon can tell you what day, what hour and minute and in what fortnight and season you are currently in, all by observing and listening to what the horlogon of Emperor Minimus is telling!






    share|improve this answer


























    • This is how the Remans in my own world went about it, anyway!

      – elemtilas
      Jan 3 at 19:23






    • 4





      When you remove the gilded lilly, what's left of this answer is remarkably simple and, IMHO, the best answser. The slaves keep a cistern filled with water. The sistern can be made of a central, deep column and a larger, wider bowl at the top so the pressure remains reasonably constant while the water level shifts up and down with human error. The result is a constant and predictable flow of water that can be used to drive gearing of any complexity known to the Romans and easily calibrated to any desired timekeeping condition. Boom, baby. Well done Elemtilas.

      – JBH
      Jan 3 at 20:40






    • 1





      Thank you much, @JBH! I, of course, appreciate the gilded lily aspect of this answer. The "clock" proper is simply constant water flow and a chime to help the human mind keep track of the time factor with respect to water flow. But, hey, this is Rome! And wealthy Romans thrive on opulent displays of wealth and power! Plus, I needed something for all the slaves to occupy their time.

      – elemtilas
      Jan 3 at 21:04








    • 1





      @Eth, that doesn't make any sense. Water pressure is simply the amount of water above a point. If a big box or bowl existed above the column, any water not directly over the column wouldn't contribute to water pressure at the base of the column. By maximizing surface area vs. column volume, you avoid the need for the water delivery precision - which is the point. Without a spring to create a primitive pressure regulator it's the best accuracy-vs-complexity trade-off.

      – JBH
      Jan 4 at 15:00






    • 2





      If your cistern has a overflow at the top you can precisely maintain the water column height, and therefore pressure without any complex regulators.

      – Corbin Matheson
      Jan 4 at 15:17
















    10





    +500









    One possibility would be this set-up, all components being available to your parallel world Roman Imperials:



    Component I: is the temporal regulation mechanism. Deep within the works of the Horologon, is a water cistern that is kept full from municipal water supplies (the Aqueduct). Pipes bring water down to a valve that is set by the engineers to flow at a certain rate. The water itself is brought up into a marble statue of a water nymph and is ejected from her left nipple at a constant rate. The water so ejected squirts onto a small water wheel which thus rotates at a constant rate. Two of the water wheel's buckets have projections that strike a small brass chime held by a bronze satyr at the wheel's base.



    Component II: is the slave regulating mechanism. This component consists of a slave, two wooden mallets and two bronze nakers (a kind of drum). The slave, taking his cues from the satyr's chime, beats out a lively rhythm on the nakers which will regulate the slaves that actually operate the horologon itself. The rhythms vary by the hour, and close attention paid by passersby will immediately tell them, just by listening, what the hour is, even if they don't look up at the horologon's clever display.



    Component III: are the slave tableaus. This is all part of the magic of Romanesque time keeping: the day being divided into fifteen hours of the clock, based on the calculated number of chime beats on Midsummer's day, there are therefore fifteen tableaux visible on the horologon's portico. The figures in each tableau are dressed in characteristic fashion of a particular region of the Empire and the slaves in each tableau dance in a fashion characteristic of that region. Other slaves, the tempora magistri, or "conductors", beat time along with the nakers by tapping their feet and striking the floor of the portico with their batons. Baton strikes are carefully counted and choreographed with the rhythms of the nakers to occur every half minute, first one strike then a double-strike. Every minute, or every double-strike of the conductors' baton therefore denotes one minute. At this moment, the tableau advances slightly around the portico.



    Component IIIJ: is the horologon's display. Resting upon a great toothed rondel of hard wood at the centre of the tableau is a similarly toothed rondel from which radiates fifteen long spars with red legionary shields at the end of each, upon which are painted large numbers: J, IJ, IIJ, IIIJ, etc. up to XV.



    Component V: is the housing. Naturally, the Emperor wishes to help the people of the Eternal City tell time, else why build a public horologon at all? But more importantly, he wishes to make a grand and opulent public display of the whole matter. Sure, any Marcus Aurelius in the street can look up at the Sun and say, oh, it's a little after noon. But the Emperor wants to make sure that not only his own subjects, but also traders from distant lands and embassies from rival empires and visiting dignitaries alike are awed by the cunning engineering and obviously vast wealth of the Empire. To do this, the entire horologon is housed within a marble temple like building, perhaps on the end of one of the basilicas. The beauty of its painted statuary and mythological stonework is a feast for the eyes; and all eyes will be drawn to the huge arched skene, the stage where the tableaux play out.



    Component VJ: is the general orchestration of the horologon. All well and good, but how does one actually tell time? Quite simply, if one is sufficiently literate, one can simply read the numbers on the dial. As the big XIJ moves across the stage, you know it's twelve o'clock. If you're clever and you notice the evenly spaced markings along the base of the stage, you'll see that each time the conductor double-strikes his baton, the cartouche moves from one marking to the next. And, again, if you're literate, you'll notice that these markings are labelled: prima, secunda, tertia, etc. The big numbers indicate hours of the clock, the small numbers indicate minutes.



    But the wise observer will note the horologon does much more than count minutes and hours. Indeed, the wise Emperor has devised the tableaux in such a way that each set of costumes and each set of dances is constantly changed over the course of time. Every day, the timed syllable chanting of the slaves, with its calculated number of syllables per line & strophe, corresponding to the passage of minutes, changes -- one day, hymns to the Moon or the Stars or to Istar or Ares; every two weeks, the dances change slightly and every month the costumes change as well. Every three months, the over-arching theme changes. Thus, the observant student of the imperial horologon can tell you what day, what hour and minute and in what fortnight and season you are currently in, all by observing and listening to what the horlogon of Emperor Minimus is telling!






    share|improve this answer


























    • This is how the Remans in my own world went about it, anyway!

      – elemtilas
      Jan 3 at 19:23






    • 4





      When you remove the gilded lilly, what's left of this answer is remarkably simple and, IMHO, the best answser. The slaves keep a cistern filled with water. The sistern can be made of a central, deep column and a larger, wider bowl at the top so the pressure remains reasonably constant while the water level shifts up and down with human error. The result is a constant and predictable flow of water that can be used to drive gearing of any complexity known to the Romans and easily calibrated to any desired timekeeping condition. Boom, baby. Well done Elemtilas.

      – JBH
      Jan 3 at 20:40






    • 1





      Thank you much, @JBH! I, of course, appreciate the gilded lily aspect of this answer. The "clock" proper is simply constant water flow and a chime to help the human mind keep track of the time factor with respect to water flow. But, hey, this is Rome! And wealthy Romans thrive on opulent displays of wealth and power! Plus, I needed something for all the slaves to occupy their time.

      – elemtilas
      Jan 3 at 21:04








    • 1





      @Eth, that doesn't make any sense. Water pressure is simply the amount of water above a point. If a big box or bowl existed above the column, any water not directly over the column wouldn't contribute to water pressure at the base of the column. By maximizing surface area vs. column volume, you avoid the need for the water delivery precision - which is the point. Without a spring to create a primitive pressure regulator it's the best accuracy-vs-complexity trade-off.

      – JBH
      Jan 4 at 15:00






    • 2





      If your cistern has a overflow at the top you can precisely maintain the water column height, and therefore pressure without any complex regulators.

      – Corbin Matheson
      Jan 4 at 15:17














    10





    +500







    10





    +500



    10




    +500





    One possibility would be this set-up, all components being available to your parallel world Roman Imperials:



    Component I: is the temporal regulation mechanism. Deep within the works of the Horologon, is a water cistern that is kept full from municipal water supplies (the Aqueduct). Pipes bring water down to a valve that is set by the engineers to flow at a certain rate. The water itself is brought up into a marble statue of a water nymph and is ejected from her left nipple at a constant rate. The water so ejected squirts onto a small water wheel which thus rotates at a constant rate. Two of the water wheel's buckets have projections that strike a small brass chime held by a bronze satyr at the wheel's base.



    Component II: is the slave regulating mechanism. This component consists of a slave, two wooden mallets and two bronze nakers (a kind of drum). The slave, taking his cues from the satyr's chime, beats out a lively rhythm on the nakers which will regulate the slaves that actually operate the horologon itself. The rhythms vary by the hour, and close attention paid by passersby will immediately tell them, just by listening, what the hour is, even if they don't look up at the horologon's clever display.



    Component III: are the slave tableaus. This is all part of the magic of Romanesque time keeping: the day being divided into fifteen hours of the clock, based on the calculated number of chime beats on Midsummer's day, there are therefore fifteen tableaux visible on the horologon's portico. The figures in each tableau are dressed in characteristic fashion of a particular region of the Empire and the slaves in each tableau dance in a fashion characteristic of that region. Other slaves, the tempora magistri, or "conductors", beat time along with the nakers by tapping their feet and striking the floor of the portico with their batons. Baton strikes are carefully counted and choreographed with the rhythms of the nakers to occur every half minute, first one strike then a double-strike. Every minute, or every double-strike of the conductors' baton therefore denotes one minute. At this moment, the tableau advances slightly around the portico.



    Component IIIJ: is the horologon's display. Resting upon a great toothed rondel of hard wood at the centre of the tableau is a similarly toothed rondel from which radiates fifteen long spars with red legionary shields at the end of each, upon which are painted large numbers: J, IJ, IIJ, IIIJ, etc. up to XV.



    Component V: is the housing. Naturally, the Emperor wishes to help the people of the Eternal City tell time, else why build a public horologon at all? But more importantly, he wishes to make a grand and opulent public display of the whole matter. Sure, any Marcus Aurelius in the street can look up at the Sun and say, oh, it's a little after noon. But the Emperor wants to make sure that not only his own subjects, but also traders from distant lands and embassies from rival empires and visiting dignitaries alike are awed by the cunning engineering and obviously vast wealth of the Empire. To do this, the entire horologon is housed within a marble temple like building, perhaps on the end of one of the basilicas. The beauty of its painted statuary and mythological stonework is a feast for the eyes; and all eyes will be drawn to the huge arched skene, the stage where the tableaux play out.



    Component VJ: is the general orchestration of the horologon. All well and good, but how does one actually tell time? Quite simply, if one is sufficiently literate, one can simply read the numbers on the dial. As the big XIJ moves across the stage, you know it's twelve o'clock. If you're clever and you notice the evenly spaced markings along the base of the stage, you'll see that each time the conductor double-strikes his baton, the cartouche moves from one marking to the next. And, again, if you're literate, you'll notice that these markings are labelled: prima, secunda, tertia, etc. The big numbers indicate hours of the clock, the small numbers indicate minutes.



    But the wise observer will note the horologon does much more than count minutes and hours. Indeed, the wise Emperor has devised the tableaux in such a way that each set of costumes and each set of dances is constantly changed over the course of time. Every day, the timed syllable chanting of the slaves, with its calculated number of syllables per line & strophe, corresponding to the passage of minutes, changes -- one day, hymns to the Moon or the Stars or to Istar or Ares; every two weeks, the dances change slightly and every month the costumes change as well. Every three months, the over-arching theme changes. Thus, the observant student of the imperial horologon can tell you what day, what hour and minute and in what fortnight and season you are currently in, all by observing and listening to what the horlogon of Emperor Minimus is telling!






    share|improve this answer















    One possibility would be this set-up, all components being available to your parallel world Roman Imperials:



    Component I: is the temporal regulation mechanism. Deep within the works of the Horologon, is a water cistern that is kept full from municipal water supplies (the Aqueduct). Pipes bring water down to a valve that is set by the engineers to flow at a certain rate. The water itself is brought up into a marble statue of a water nymph and is ejected from her left nipple at a constant rate. The water so ejected squirts onto a small water wheel which thus rotates at a constant rate. Two of the water wheel's buckets have projections that strike a small brass chime held by a bronze satyr at the wheel's base.



    Component II: is the slave regulating mechanism. This component consists of a slave, two wooden mallets and two bronze nakers (a kind of drum). The slave, taking his cues from the satyr's chime, beats out a lively rhythm on the nakers which will regulate the slaves that actually operate the horologon itself. The rhythms vary by the hour, and close attention paid by passersby will immediately tell them, just by listening, what the hour is, even if they don't look up at the horologon's clever display.



    Component III: are the slave tableaus. This is all part of the magic of Romanesque time keeping: the day being divided into fifteen hours of the clock, based on the calculated number of chime beats on Midsummer's day, there are therefore fifteen tableaux visible on the horologon's portico. The figures in each tableau are dressed in characteristic fashion of a particular region of the Empire and the slaves in each tableau dance in a fashion characteristic of that region. Other slaves, the tempora magistri, or "conductors", beat time along with the nakers by tapping their feet and striking the floor of the portico with their batons. Baton strikes are carefully counted and choreographed with the rhythms of the nakers to occur every half minute, first one strike then a double-strike. Every minute, or every double-strike of the conductors' baton therefore denotes one minute. At this moment, the tableau advances slightly around the portico.



    Component IIIJ: is the horologon's display. Resting upon a great toothed rondel of hard wood at the centre of the tableau is a similarly toothed rondel from which radiates fifteen long spars with red legionary shields at the end of each, upon which are painted large numbers: J, IJ, IIJ, IIIJ, etc. up to XV.



    Component V: is the housing. Naturally, the Emperor wishes to help the people of the Eternal City tell time, else why build a public horologon at all? But more importantly, he wishes to make a grand and opulent public display of the whole matter. Sure, any Marcus Aurelius in the street can look up at the Sun and say, oh, it's a little after noon. But the Emperor wants to make sure that not only his own subjects, but also traders from distant lands and embassies from rival empires and visiting dignitaries alike are awed by the cunning engineering and obviously vast wealth of the Empire. To do this, the entire horologon is housed within a marble temple like building, perhaps on the end of one of the basilicas. The beauty of its painted statuary and mythological stonework is a feast for the eyes; and all eyes will be drawn to the huge arched skene, the stage where the tableaux play out.



    Component VJ: is the general orchestration of the horologon. All well and good, but how does one actually tell time? Quite simply, if one is sufficiently literate, one can simply read the numbers on the dial. As the big XIJ moves across the stage, you know it's twelve o'clock. If you're clever and you notice the evenly spaced markings along the base of the stage, you'll see that each time the conductor double-strikes his baton, the cartouche moves from one marking to the next. And, again, if you're literate, you'll notice that these markings are labelled: prima, secunda, tertia, etc. The big numbers indicate hours of the clock, the small numbers indicate minutes.



    But the wise observer will note the horologon does much more than count minutes and hours. Indeed, the wise Emperor has devised the tableaux in such a way that each set of costumes and each set of dances is constantly changed over the course of time. Every day, the timed syllable chanting of the slaves, with its calculated number of syllables per line & strophe, corresponding to the passage of minutes, changes -- one day, hymns to the Moon or the Stars or to Istar or Ares; every two weeks, the dances change slightly and every month the costumes change as well. Every three months, the over-arching theme changes. Thus, the observant student of the imperial horologon can tell you what day, what hour and minute and in what fortnight and season you are currently in, all by observing and listening to what the horlogon of Emperor Minimus is telling!







    share|improve this answer














    share|improve this answer



    share|improve this answer








    edited Jan 3 at 19:18

























    answered Jan 3 at 19:10









    elemtilaselemtilas

    12.4k22656




    12.4k22656













    • This is how the Remans in my own world went about it, anyway!

      – elemtilas
      Jan 3 at 19:23






    • 4





      When you remove the gilded lilly, what's left of this answer is remarkably simple and, IMHO, the best answser. The slaves keep a cistern filled with water. The sistern can be made of a central, deep column and a larger, wider bowl at the top so the pressure remains reasonably constant while the water level shifts up and down with human error. The result is a constant and predictable flow of water that can be used to drive gearing of any complexity known to the Romans and easily calibrated to any desired timekeeping condition. Boom, baby. Well done Elemtilas.

      – JBH
      Jan 3 at 20:40






    • 1





      Thank you much, @JBH! I, of course, appreciate the gilded lily aspect of this answer. The "clock" proper is simply constant water flow and a chime to help the human mind keep track of the time factor with respect to water flow. But, hey, this is Rome! And wealthy Romans thrive on opulent displays of wealth and power! Plus, I needed something for all the slaves to occupy their time.

      – elemtilas
      Jan 3 at 21:04








    • 1





      @Eth, that doesn't make any sense. Water pressure is simply the amount of water above a point. If a big box or bowl existed above the column, any water not directly over the column wouldn't contribute to water pressure at the base of the column. By maximizing surface area vs. column volume, you avoid the need for the water delivery precision - which is the point. Without a spring to create a primitive pressure regulator it's the best accuracy-vs-complexity trade-off.

      – JBH
      Jan 4 at 15:00






    • 2





      If your cistern has a overflow at the top you can precisely maintain the water column height, and therefore pressure without any complex regulators.

      – Corbin Matheson
      Jan 4 at 15:17



















    • This is how the Remans in my own world went about it, anyway!

      – elemtilas
      Jan 3 at 19:23






    • 4





      When you remove the gilded lilly, what's left of this answer is remarkably simple and, IMHO, the best answser. The slaves keep a cistern filled with water. The sistern can be made of a central, deep column and a larger, wider bowl at the top so the pressure remains reasonably constant while the water level shifts up and down with human error. The result is a constant and predictable flow of water that can be used to drive gearing of any complexity known to the Romans and easily calibrated to any desired timekeeping condition. Boom, baby. Well done Elemtilas.

      – JBH
      Jan 3 at 20:40






    • 1





      Thank you much, @JBH! I, of course, appreciate the gilded lily aspect of this answer. The "clock" proper is simply constant water flow and a chime to help the human mind keep track of the time factor with respect to water flow. But, hey, this is Rome! And wealthy Romans thrive on opulent displays of wealth and power! Plus, I needed something for all the slaves to occupy their time.

      – elemtilas
      Jan 3 at 21:04








    • 1





      @Eth, that doesn't make any sense. Water pressure is simply the amount of water above a point. If a big box or bowl existed above the column, any water not directly over the column wouldn't contribute to water pressure at the base of the column. By maximizing surface area vs. column volume, you avoid the need for the water delivery precision - which is the point. Without a spring to create a primitive pressure regulator it's the best accuracy-vs-complexity trade-off.

      – JBH
      Jan 4 at 15:00






    • 2





      If your cistern has a overflow at the top you can precisely maintain the water column height, and therefore pressure without any complex regulators.

      – Corbin Matheson
      Jan 4 at 15:17

















    This is how the Remans in my own world went about it, anyway!

    – elemtilas
    Jan 3 at 19:23





    This is how the Remans in my own world went about it, anyway!

    – elemtilas
    Jan 3 at 19:23




    4




    4





    When you remove the gilded lilly, what's left of this answer is remarkably simple and, IMHO, the best answser. The slaves keep a cistern filled with water. The sistern can be made of a central, deep column and a larger, wider bowl at the top so the pressure remains reasonably constant while the water level shifts up and down with human error. The result is a constant and predictable flow of water that can be used to drive gearing of any complexity known to the Romans and easily calibrated to any desired timekeeping condition. Boom, baby. Well done Elemtilas.

    – JBH
    Jan 3 at 20:40





    When you remove the gilded lilly, what's left of this answer is remarkably simple and, IMHO, the best answser. The slaves keep a cistern filled with water. The sistern can be made of a central, deep column and a larger, wider bowl at the top so the pressure remains reasonably constant while the water level shifts up and down with human error. The result is a constant and predictable flow of water that can be used to drive gearing of any complexity known to the Romans and easily calibrated to any desired timekeeping condition. Boom, baby. Well done Elemtilas.

    – JBH
    Jan 3 at 20:40




    1




    1





    Thank you much, @JBH! I, of course, appreciate the gilded lily aspect of this answer. The "clock" proper is simply constant water flow and a chime to help the human mind keep track of the time factor with respect to water flow. But, hey, this is Rome! And wealthy Romans thrive on opulent displays of wealth and power! Plus, I needed something for all the slaves to occupy their time.

    – elemtilas
    Jan 3 at 21:04







    Thank you much, @JBH! I, of course, appreciate the gilded lily aspect of this answer. The "clock" proper is simply constant water flow and a chime to help the human mind keep track of the time factor with respect to water flow. But, hey, this is Rome! And wealthy Romans thrive on opulent displays of wealth and power! Plus, I needed something for all the slaves to occupy their time.

    – elemtilas
    Jan 3 at 21:04






    1




    1





    @Eth, that doesn't make any sense. Water pressure is simply the amount of water above a point. If a big box or bowl existed above the column, any water not directly over the column wouldn't contribute to water pressure at the base of the column. By maximizing surface area vs. column volume, you avoid the need for the water delivery precision - which is the point. Without a spring to create a primitive pressure regulator it's the best accuracy-vs-complexity trade-off.

    – JBH
    Jan 4 at 15:00





    @Eth, that doesn't make any sense. Water pressure is simply the amount of water above a point. If a big box or bowl existed above the column, any water not directly over the column wouldn't contribute to water pressure at the base of the column. By maximizing surface area vs. column volume, you avoid the need for the water delivery precision - which is the point. Without a spring to create a primitive pressure regulator it's the best accuracy-vs-complexity trade-off.

    – JBH
    Jan 4 at 15:00




    2




    2





    If your cistern has a overflow at the top you can precisely maintain the water column height, and therefore pressure without any complex regulators.

    – Corbin Matheson
    Jan 4 at 15:17





    If your cistern has a overflow at the top you can precisely maintain the water column height, and therefore pressure without any complex regulators.

    – Corbin Matheson
    Jan 4 at 15:17











    7














    With a pendulum



    The quirk being that neither the pendulum nor the need for accurate time keeping had been invented in the period you're asking for, but gearing was already in use, the basic physics of a pendulum regulator could follow well enough.






    share|improve this answer


























    • I'm not sure how they make the pendulum swing regularly. Surely a slave would have to push it. That is subject to error. Do you have a reference that indicates how the Romans were using gearing - that sounds interesting.

      – chasly from UK
      Jan 3 at 15:31








    • 1





      @chaslyfromUK, the source you're looking for for gears is the Antikythera mechanism this could be the work of a lone raving genius, but it shows the principle of gears was known in the period.

      – Separatrix
      Jan 3 at 15:40






    • 2





      @chaslyfromUK: In 1602 Galileo discovered that the period of oscillation of a pendulum is almost independent of the amplitude of the oscillations, as long as the oscillations are small. You don't need to do anything for the pendulum to swing regularly -- it does that all by itself. The small power input is needed to compensate for energy loss due to friction in the mechanism. A large grandfather clock uses about 0.1 milliwatts of power. A huge tower clock uses about 100 milliwatts for the clock movement.

      – AlexP
      Jan 3 at 16:03








    • 2





      Two pendulums (pendula?). When one needs to be pushed, it is later synchronized to the other. When the other needs to be pushed, the process is repeated.

      – David Schwartz
      Jan 3 at 23:43








    • 2





      @Separatrix - I get you - of course the fictional emperor who wanted the accurate clock could have had his greatest philosophers research the idea and it would not be beyond the bounds of possibility that they could discover a pendulum ahead of (real-life) time...

      – colmde
      Jan 4 at 9:50


















    7














    With a pendulum



    The quirk being that neither the pendulum nor the need for accurate time keeping had been invented in the period you're asking for, but gearing was already in use, the basic physics of a pendulum regulator could follow well enough.






    share|improve this answer


























    • I'm not sure how they make the pendulum swing regularly. Surely a slave would have to push it. That is subject to error. Do you have a reference that indicates how the Romans were using gearing - that sounds interesting.

      – chasly from UK
      Jan 3 at 15:31








    • 1





      @chaslyfromUK, the source you're looking for for gears is the Antikythera mechanism this could be the work of a lone raving genius, but it shows the principle of gears was known in the period.

      – Separatrix
      Jan 3 at 15:40






    • 2





      @chaslyfromUK: In 1602 Galileo discovered that the period of oscillation of a pendulum is almost independent of the amplitude of the oscillations, as long as the oscillations are small. You don't need to do anything for the pendulum to swing regularly -- it does that all by itself. The small power input is needed to compensate for energy loss due to friction in the mechanism. A large grandfather clock uses about 0.1 milliwatts of power. A huge tower clock uses about 100 milliwatts for the clock movement.

      – AlexP
      Jan 3 at 16:03








    • 2





      Two pendulums (pendula?). When one needs to be pushed, it is later synchronized to the other. When the other needs to be pushed, the process is repeated.

      – David Schwartz
      Jan 3 at 23:43








    • 2





      @Separatrix - I get you - of course the fictional emperor who wanted the accurate clock could have had his greatest philosophers research the idea and it would not be beyond the bounds of possibility that they could discover a pendulum ahead of (real-life) time...

      – colmde
      Jan 4 at 9:50
















    7












    7








    7







    With a pendulum



    The quirk being that neither the pendulum nor the need for accurate time keeping had been invented in the period you're asking for, but gearing was already in use, the basic physics of a pendulum regulator could follow well enough.






    share|improve this answer















    With a pendulum



    The quirk being that neither the pendulum nor the need for accurate time keeping had been invented in the period you're asking for, but gearing was already in use, the basic physics of a pendulum regulator could follow well enough.







    share|improve this answer














    share|improve this answer



    share|improve this answer








    edited Jan 3 at 15:32

























    answered Jan 3 at 15:28









    SeparatrixSeparatrix

    78.8k31186308




    78.8k31186308













    • I'm not sure how they make the pendulum swing regularly. Surely a slave would have to push it. That is subject to error. Do you have a reference that indicates how the Romans were using gearing - that sounds interesting.

      – chasly from UK
      Jan 3 at 15:31








    • 1





      @chaslyfromUK, the source you're looking for for gears is the Antikythera mechanism this could be the work of a lone raving genius, but it shows the principle of gears was known in the period.

      – Separatrix
      Jan 3 at 15:40






    • 2





      @chaslyfromUK: In 1602 Galileo discovered that the period of oscillation of a pendulum is almost independent of the amplitude of the oscillations, as long as the oscillations are small. You don't need to do anything for the pendulum to swing regularly -- it does that all by itself. The small power input is needed to compensate for energy loss due to friction in the mechanism. A large grandfather clock uses about 0.1 milliwatts of power. A huge tower clock uses about 100 milliwatts for the clock movement.

      – AlexP
      Jan 3 at 16:03








    • 2





      Two pendulums (pendula?). When one needs to be pushed, it is later synchronized to the other. When the other needs to be pushed, the process is repeated.

      – David Schwartz
      Jan 3 at 23:43








    • 2





      @Separatrix - I get you - of course the fictional emperor who wanted the accurate clock could have had his greatest philosophers research the idea and it would not be beyond the bounds of possibility that they could discover a pendulum ahead of (real-life) time...

      – colmde
      Jan 4 at 9:50





















    • I'm not sure how they make the pendulum swing regularly. Surely a slave would have to push it. That is subject to error. Do you have a reference that indicates how the Romans were using gearing - that sounds interesting.

      – chasly from UK
      Jan 3 at 15:31








    • 1





      @chaslyfromUK, the source you're looking for for gears is the Antikythera mechanism this could be the work of a lone raving genius, but it shows the principle of gears was known in the period.

      – Separatrix
      Jan 3 at 15:40






    • 2





      @chaslyfromUK: In 1602 Galileo discovered that the period of oscillation of a pendulum is almost independent of the amplitude of the oscillations, as long as the oscillations are small. You don't need to do anything for the pendulum to swing regularly -- it does that all by itself. The small power input is needed to compensate for energy loss due to friction in the mechanism. A large grandfather clock uses about 0.1 milliwatts of power. A huge tower clock uses about 100 milliwatts for the clock movement.

      – AlexP
      Jan 3 at 16:03








    • 2





      Two pendulums (pendula?). When one needs to be pushed, it is later synchronized to the other. When the other needs to be pushed, the process is repeated.

      – David Schwartz
      Jan 3 at 23:43








    • 2





      @Separatrix - I get you - of course the fictional emperor who wanted the accurate clock could have had his greatest philosophers research the idea and it would not be beyond the bounds of possibility that they could discover a pendulum ahead of (real-life) time...

      – colmde
      Jan 4 at 9:50



















    I'm not sure how they make the pendulum swing regularly. Surely a slave would have to push it. That is subject to error. Do you have a reference that indicates how the Romans were using gearing - that sounds interesting.

    – chasly from UK
    Jan 3 at 15:31







    I'm not sure how they make the pendulum swing regularly. Surely a slave would have to push it. That is subject to error. Do you have a reference that indicates how the Romans were using gearing - that sounds interesting.

    – chasly from UK
    Jan 3 at 15:31






    1




    1





    @chaslyfromUK, the source you're looking for for gears is the Antikythera mechanism this could be the work of a lone raving genius, but it shows the principle of gears was known in the period.

    – Separatrix
    Jan 3 at 15:40





    @chaslyfromUK, the source you're looking for for gears is the Antikythera mechanism this could be the work of a lone raving genius, but it shows the principle of gears was known in the period.

    – Separatrix
    Jan 3 at 15:40




    2




    2





    @chaslyfromUK: In 1602 Galileo discovered that the period of oscillation of a pendulum is almost independent of the amplitude of the oscillations, as long as the oscillations are small. You don't need to do anything for the pendulum to swing regularly -- it does that all by itself. The small power input is needed to compensate for energy loss due to friction in the mechanism. A large grandfather clock uses about 0.1 milliwatts of power. A huge tower clock uses about 100 milliwatts for the clock movement.

    – AlexP
    Jan 3 at 16:03







    @chaslyfromUK: In 1602 Galileo discovered that the period of oscillation of a pendulum is almost independent of the amplitude of the oscillations, as long as the oscillations are small. You don't need to do anything for the pendulum to swing regularly -- it does that all by itself. The small power input is needed to compensate for energy loss due to friction in the mechanism. A large grandfather clock uses about 0.1 milliwatts of power. A huge tower clock uses about 100 milliwatts for the clock movement.

    – AlexP
    Jan 3 at 16:03






    2




    2





    Two pendulums (pendula?). When one needs to be pushed, it is later synchronized to the other. When the other needs to be pushed, the process is repeated.

    – David Schwartz
    Jan 3 at 23:43







    Two pendulums (pendula?). When one needs to be pushed, it is later synchronized to the other. When the other needs to be pushed, the process is repeated.

    – David Schwartz
    Jan 3 at 23:43






    2




    2





    @Separatrix - I get you - of course the fictional emperor who wanted the accurate clock could have had his greatest philosophers research the idea and it would not be beyond the bounds of possibility that they could discover a pendulum ahead of (real-life) time...

    – colmde
    Jan 4 at 9:50







    @Separatrix - I get you - of course the fictional emperor who wanted the accurate clock could have had his greatest philosophers research the idea and it would not be beyond the bounds of possibility that they could discover a pendulum ahead of (real-life) time...

    – colmde
    Jan 4 at 9:50













    6















    • Have the slaves build a large wheel, with an even number of carts evenly spread around it and a clear mark on it.


    • Have the wheel installed with an horizontal axis, free of spinning.


    • Have the slaves cut a number of stones, all from the same mine, all with the same shape and weight.


    • Have the slaves carry the stones to the top of the wheel, where they will put one stone in each cart reaching the top.


    • Have the slaves take away the stone from the cart when it reaches the bottom and carry the stone to the top.


    • Define every round trip of the mark on the wheel your base time unit.







    share|improve this answer



















    • 1





      That is interesting - I like it. How would you prevent slaves putting stones onto the wheel too soon or too late?

      – chasly from UK
      Jan 3 at 15:43











    • @chaslyfromUK, mechanical safety or slave supervisors equipped with whips

      – L.Dutch♦
      Jan 3 at 15:46






    • 7





      I read it as "an even number of cats" which makes a good answer even better.

      – user535733
      Jan 3 at 17:05






    • 1





      This machine works only against the friction in the wheel axis. After a day it will become faster or slower, depending on the wear.

      – Karl
      Jan 3 at 18:17






    • 1





      A neat idea but doesn't seem like it would be very accuracte. The moment you switch slaves, their speed, carrying capacity, etc would change, as would there performance at different energy levels (fresh/tired/hungry/sleep deprived). But the real problem is the absurd limitations of the question.

      – Tyler S. Loeper
      Jan 3 at 18:29


















    6















    • Have the slaves build a large wheel, with an even number of carts evenly spread around it and a clear mark on it.


    • Have the wheel installed with an horizontal axis, free of spinning.


    • Have the slaves cut a number of stones, all from the same mine, all with the same shape and weight.


    • Have the slaves carry the stones to the top of the wheel, where they will put one stone in each cart reaching the top.


    • Have the slaves take away the stone from the cart when it reaches the bottom and carry the stone to the top.


    • Define every round trip of the mark on the wheel your base time unit.







    share|improve this answer



















    • 1





      That is interesting - I like it. How would you prevent slaves putting stones onto the wheel too soon or too late?

      – chasly from UK
      Jan 3 at 15:43











    • @chaslyfromUK, mechanical safety or slave supervisors equipped with whips

      – L.Dutch♦
      Jan 3 at 15:46






    • 7





      I read it as "an even number of cats" which makes a good answer even better.

      – user535733
      Jan 3 at 17:05






    • 1





      This machine works only against the friction in the wheel axis. After a day it will become faster or slower, depending on the wear.

      – Karl
      Jan 3 at 18:17






    • 1





      A neat idea but doesn't seem like it would be very accuracte. The moment you switch slaves, their speed, carrying capacity, etc would change, as would there performance at different energy levels (fresh/tired/hungry/sleep deprived). But the real problem is the absurd limitations of the question.

      – Tyler S. Loeper
      Jan 3 at 18:29
















    6












    6








    6








    • Have the slaves build a large wheel, with an even number of carts evenly spread around it and a clear mark on it.


    • Have the wheel installed with an horizontal axis, free of spinning.


    • Have the slaves cut a number of stones, all from the same mine, all with the same shape and weight.


    • Have the slaves carry the stones to the top of the wheel, where they will put one stone in each cart reaching the top.


    • Have the slaves take away the stone from the cart when it reaches the bottom and carry the stone to the top.


    • Define every round trip of the mark on the wheel your base time unit.







    share|improve this answer














    • Have the slaves build a large wheel, with an even number of carts evenly spread around it and a clear mark on it.


    • Have the wheel installed with an horizontal axis, free of spinning.


    • Have the slaves cut a number of stones, all from the same mine, all with the same shape and weight.


    • Have the slaves carry the stones to the top of the wheel, where they will put one stone in each cart reaching the top.


    • Have the slaves take away the stone from the cart when it reaches the bottom and carry the stone to the top.


    • Define every round trip of the mark on the wheel your base time unit.








    share|improve this answer












    share|improve this answer



    share|improve this answer










    answered Jan 3 at 15:38









    L.Dutch♦L.Dutch

    78.8k26188386




    78.8k26188386








    • 1





      That is interesting - I like it. How would you prevent slaves putting stones onto the wheel too soon or too late?

      – chasly from UK
      Jan 3 at 15:43











    • @chaslyfromUK, mechanical safety or slave supervisors equipped with whips

      – L.Dutch♦
      Jan 3 at 15:46






    • 7





      I read it as "an even number of cats" which makes a good answer even better.

      – user535733
      Jan 3 at 17:05






    • 1





      This machine works only against the friction in the wheel axis. After a day it will become faster or slower, depending on the wear.

      – Karl
      Jan 3 at 18:17






    • 1





      A neat idea but doesn't seem like it would be very accuracte. The moment you switch slaves, their speed, carrying capacity, etc would change, as would there performance at different energy levels (fresh/tired/hungry/sleep deprived). But the real problem is the absurd limitations of the question.

      – Tyler S. Loeper
      Jan 3 at 18:29
















    • 1





      That is interesting - I like it. How would you prevent slaves putting stones onto the wheel too soon or too late?

      – chasly from UK
      Jan 3 at 15:43











    • @chaslyfromUK, mechanical safety or slave supervisors equipped with whips

      – L.Dutch♦
      Jan 3 at 15:46






    • 7





      I read it as "an even number of cats" which makes a good answer even better.

      – user535733
      Jan 3 at 17:05






    • 1





      This machine works only against the friction in the wheel axis. After a day it will become faster or slower, depending on the wear.

      – Karl
      Jan 3 at 18:17






    • 1





      A neat idea but doesn't seem like it would be very accuracte. The moment you switch slaves, their speed, carrying capacity, etc would change, as would there performance at different energy levels (fresh/tired/hungry/sleep deprived). But the real problem is the absurd limitations of the question.

      – Tyler S. Loeper
      Jan 3 at 18:29










    1




    1





    That is interesting - I like it. How would you prevent slaves putting stones onto the wheel too soon or too late?

    – chasly from UK
    Jan 3 at 15:43





    That is interesting - I like it. How would you prevent slaves putting stones onto the wheel too soon or too late?

    – chasly from UK
    Jan 3 at 15:43













    @chaslyfromUK, mechanical safety or slave supervisors equipped with whips

    – L.Dutch♦
    Jan 3 at 15:46





    @chaslyfromUK, mechanical safety or slave supervisors equipped with whips

    – L.Dutch♦
    Jan 3 at 15:46




    7




    7





    I read it as "an even number of cats" which makes a good answer even better.

    – user535733
    Jan 3 at 17:05





    I read it as "an even number of cats" which makes a good answer even better.

    – user535733
    Jan 3 at 17:05




    1




    1





    This machine works only against the friction in the wheel axis. After a day it will become faster or slower, depending on the wear.

    – Karl
    Jan 3 at 18:17





    This machine works only against the friction in the wheel axis. After a day it will become faster or slower, depending on the wear.

    – Karl
    Jan 3 at 18:17




    1




    1





    A neat idea but doesn't seem like it would be very accuracte. The moment you switch slaves, their speed, carrying capacity, etc would change, as would there performance at different energy levels (fresh/tired/hungry/sleep deprived). But the real problem is the absurd limitations of the question.

    – Tyler S. Loeper
    Jan 3 at 18:29







    A neat idea but doesn't seem like it would be very accuracte. The moment you switch slaves, their speed, carrying capacity, etc would change, as would there performance at different energy levels (fresh/tired/hungry/sleep deprived). But the real problem is the absurd limitations of the question.

    – Tyler S. Loeper
    Jan 3 at 18:29













    2














    With the mention of the analogue face, I'm going to assume they have a decent grasp of gearing. From there you need to control the speed that the slaves are rotating, for that you can use a simplified centrifuge governor.



    centrifuge governor



    Attach an arrow to the flyweights and have them point to a sweetspot chart and you could maintain a somewhat accurate fixed rotation speed.






    share|improve this answer
























    • So, basically, replace flyballs d(sub-b) and h(sub-s) with equally weighted slaves...

      – elemtilas
      Jan 3 at 18:12











    • nah, rig it so if the slaves don't get the flyballs spinning fast enough, the flyballs his levers that cause whips to auto-lash the slaves pushing the main drive wheel.

      – Corbin Matheson
      Jan 3 at 18:26
















    2














    With the mention of the analogue face, I'm going to assume they have a decent grasp of gearing. From there you need to control the speed that the slaves are rotating, for that you can use a simplified centrifuge governor.



    centrifuge governor



    Attach an arrow to the flyweights and have them point to a sweetspot chart and you could maintain a somewhat accurate fixed rotation speed.






    share|improve this answer
























    • So, basically, replace flyballs d(sub-b) and h(sub-s) with equally weighted slaves...

      – elemtilas
      Jan 3 at 18:12











    • nah, rig it so if the slaves don't get the flyballs spinning fast enough, the flyballs his levers that cause whips to auto-lash the slaves pushing the main drive wheel.

      – Corbin Matheson
      Jan 3 at 18:26














    2












    2








    2







    With the mention of the analogue face, I'm going to assume they have a decent grasp of gearing. From there you need to control the speed that the slaves are rotating, for that you can use a simplified centrifuge governor.



    centrifuge governor



    Attach an arrow to the flyweights and have them point to a sweetspot chart and you could maintain a somewhat accurate fixed rotation speed.






    share|improve this answer













    With the mention of the analogue face, I'm going to assume they have a decent grasp of gearing. From there you need to control the speed that the slaves are rotating, for that you can use a simplified centrifuge governor.



    centrifuge governor



    Attach an arrow to the flyweights and have them point to a sweetspot chart and you could maintain a somewhat accurate fixed rotation speed.







    share|improve this answer












    share|improve this answer



    share|improve this answer










    answered Jan 3 at 18:10









    Corbin MathesonCorbin Matheson

    1812




    1812













    • So, basically, replace flyballs d(sub-b) and h(sub-s) with equally weighted slaves...

      – elemtilas
      Jan 3 at 18:12











    • nah, rig it so if the slaves don't get the flyballs spinning fast enough, the flyballs his levers that cause whips to auto-lash the slaves pushing the main drive wheel.

      – Corbin Matheson
      Jan 3 at 18:26



















    • So, basically, replace flyballs d(sub-b) and h(sub-s) with equally weighted slaves...

      – elemtilas
      Jan 3 at 18:12











    • nah, rig it so if the slaves don't get the flyballs spinning fast enough, the flyballs his levers that cause whips to auto-lash the slaves pushing the main drive wheel.

      – Corbin Matheson
      Jan 3 at 18:26

















    So, basically, replace flyballs d(sub-b) and h(sub-s) with equally weighted slaves...

    – elemtilas
    Jan 3 at 18:12





    So, basically, replace flyballs d(sub-b) and h(sub-s) with equally weighted slaves...

    – elemtilas
    Jan 3 at 18:12













    nah, rig it so if the slaves don't get the flyballs spinning fast enough, the flyballs his levers that cause whips to auto-lash the slaves pushing the main drive wheel.

    – Corbin Matheson
    Jan 3 at 18:26





    nah, rig it so if the slaves don't get the flyballs spinning fast enough, the flyballs his levers that cause whips to auto-lash the slaves pushing the main drive wheel.

    – Corbin Matheson
    Jan 3 at 18:26











    1














    You build a release for polished, uniform stones on the top of a slope or fall, which is triggered by the stones hitting the ground.






    share|improve this answer




























      1














      You build a release for polished, uniform stones on the top of a slope or fall, which is triggered by the stones hitting the ground.






      share|improve this answer


























        1












        1








        1







        You build a release for polished, uniform stones on the top of a slope or fall, which is triggered by the stones hitting the ground.






        share|improve this answer













        You build a release for polished, uniform stones on the top of a slope or fall, which is triggered by the stones hitting the ground.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Jan 3 at 18:27









        KarlKarl

        2,677816




        2,677816






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Worldbuilding Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid …



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            Use MathJax to format equations. MathJax reference.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fworldbuilding.stackexchange.com%2fquestions%2f135487%2fa-roman-technology-clock-run-by-slaves-how-to-make-it-accurate%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            -

            Popular posts from this blog

            How to change which sound is reproduced for terminal bell?

            Image
            3 Recently upgrade to 18.10 from 18.04, and using the terminal is becoming annoying: the new alert sound is a drip ( /usr/share/sounds/gnome/default/alerts/drip.ogg ), and the previous one is still located at ( /usr/share/sounds/ubuntu/stereo/bell.ogg ). My issue is that at the gnome-terminal, when autocompleting or pressing left BOTH sounds are reproduced, at the same time. I want to just have ubuntu/stereo/bell.ogg active, not both . At the moment I have been only able to reduce the volume of the alerts (but still both are played), or turn the alerts down (but I dislike both "solutions"). gnome-terminal 18.10 teminal-bell share | improve this question
            Read more

            Title Spacing in Bjornstrup Chapter, Removing Chapter Number From Contents

            Image
            up vote 5 down vote favorite 2 I would like to make it so that the vertical space below the title of each chapter is the same when using the Bjornstrup package (i.e. so that the descenders do not affect the spacing - as shown by the red arrow in the picture below). I think I'm fairly happy with the spacing around "A chapter", so I'd really like titles without descenders (e.g. "Contents") to have the same vertical spacing as "A chapter" below the title. I would also like to remove the large "0" in the contents title. Any help appreciated, as always. documentclass[11pt,a4paper]{book} % Packages[![enter image description here][1]][1] usepackage[left=3.5cm, right=3.5cm, top=4.3cm, bottom=4.25cm]{geometry} usepackage[utf8]{inputenc} usepackage{libertine} usepackage[libertine]{newtx
            Read more

            Can I use Tabulator js library in my java Spring + Thymeleaf project?

            Image
            0 I want to add Tabulator js to my java project. I added tabulator.min.js, tabulator.min.css to resources folder. After that added to my html page these dependencies as recommending in readme.md. <link rel="stylesheet" th:href="@{/css/tabulator.min.css}"> <script type="text/javascript" th:src="@{/js/tabulator.min.js}"></script> Now my tables view all elements, that I have in the html page, but not correct. In the documentation of Tabulator is example how to create header and table, var table = new Tabulator("#example-table", { columns:[ {title:"Name", field:"name", sorter:"string", width:200, editor:true}, {title:"Age", field:"age", sorter:"
            Read more