Running file with some extension
3
$begingroup$
I want to run the Mathematica file with some extension, like '.m'. But, I don't know, how can I run the code. Please, guide me.
packages
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
$endgroup$
add a comment |
3
$begingroup$
I want to run the Mathematica file with some extension, like '.m'. But, I don't know, how can I run the code. Please, guide me.
packages
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
$endgroup$
2
$begingroup$
Have a look atGet.
$endgroup$
– Henrik Schumacher
Mar 17 at 12:25
$begingroup$
To keep it simple, pass the full path to the file to theGetfunction. That's all.
$endgroup$
– Szabolcs
Mar 18 at 12:12
$begingroup$
what is ''Get''? There is no link. I can't open this. How can I pass the full path to the file? Can you help me Please? I have Mathematica 11.3 in my system. But, not able to run the code in file with extension ''.m''.
$endgroup$
– Misbah Shahzadi
Mar 18 at 13:26
$begingroup$
Please help me. Actually I don't know about packages. So, I am facing difficulties.
$endgroup$
– Misbah Shahzadi
Mar 18 at 18:17
add a comment |
3
3
3
$begingroup$
I want to run the Mathematica file with some extension, like '.m'. But, I don't know, how can I run the code. Please, guide me.
packages
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
$endgroup$
I want to run the Mathematica file with some extension, like '.m'. But, I don't know, how can I run the code. Please, guide me.
packages
packages
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
edited Mar 17 at 14:23
J. M. is slightly pensive♦
98.5k10309466
98.5k10309466
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
asked Mar 17 at 12:20
Misbah ShahzadiMisbah Shahzadi
162
162
2
$begingroup$
Have a look atGet.
$endgroup$
– Henrik Schumacher
Mar 17 at 12:25
$begingroup$
To keep it simple, pass the full path to the file to theGetfunction. That's all.
$endgroup$
– Szabolcs
Mar 18 at 12:12
$begingroup$
what is ''Get''? There is no link. I can't open this. How can I pass the full path to the file? Can you help me Please? I have Mathematica 11.3 in my system. But, not able to run the code in file with extension ''.m''.
$endgroup$
– Misbah Shahzadi
Mar 18 at 13:26
$begingroup$
Please help me. Actually I don't know about packages. So, I am facing difficulties.
$endgroup$
– Misbah Shahzadi
Mar 18 at 18:17
add a comment |
2
$begingroup$
Have a look atGet.
$endgroup$
– Henrik Schumacher
Mar 17 at 12:25
$begingroup$
To keep it simple, pass the full path to the file to theGetfunction. That's all.
$endgroup$
– Szabolcs
Mar 18 at 12:12
$begingroup$
what is ''Get''? There is no link. I can't open this. How can I pass the full path to the file? Can you help me Please? I have Mathematica 11.3 in my system. But, not able to run the code in file with extension ''.m''.
$endgroup$
– Misbah Shahzadi
Mar 18 at 13:26
$begingroup$
Please help me. Actually I don't know about packages. So, I am facing difficulties.
$endgroup$
– Misbah Shahzadi
Mar 18 at 18:17
2
2
$begingroup$
Have a look at
Get.$endgroup$
– Henrik Schumacher
Mar 17 at 12:25
$begingroup$
Have a look at
Get.$endgroup$
– Henrik Schumacher
Mar 17 at 12:25
$begingroup$
To keep it simple, pass the full path to the file to the
Get function. That's all.$endgroup$
– Szabolcs
Mar 18 at 12:12
$begingroup$
To keep it simple, pass the full path to the file to the
Get function. That's all.$endgroup$
– Szabolcs
Mar 18 at 12:12
$begingroup$
what is ''Get''? There is no link. I can't open this. How can I pass the full path to the file? Can you help me Please? I have Mathematica 11.3 in my system. But, not able to run the code in file with extension ''.m''.
$endgroup$
– Misbah Shahzadi
Mar 18 at 13:26
$begingroup$
what is ''Get''? There is no link. I can't open this. How can I pass the full path to the file? Can you help me Please? I have Mathematica 11.3 in my system. But, not able to run the code in file with extension ''.m''.
$endgroup$
– Misbah Shahzadi
Mar 18 at 13:26
$begingroup$
Please help me. Actually I don't know about packages. So, I am facing difficulties.
$endgroup$
– Misbah Shahzadi
Mar 18 at 18:17
$begingroup$
Please help me. Actually I don't know about packages. So, I am facing difficulties.
$endgroup$
– Misbah Shahzadi
Mar 18 at 18:17
add a comment |
1 Answer
1
active
oldest
votes
2
$begingroup$
If a file has the extension .m, then I assume you are trying to load a package into your notebook. This can be achieved by calling the package (say called PackageName.m) into your own notebook by doing the following:
You can type into your opening like
<<PackageName`, which uses the backtick symbol`. It is probably at the left hand side of your keyboard.Alternatively, this is a shortcut for the MMA function
Get, given in the documentation here. The first example has the above notation I was talking about. ThenGet["PackageName.m"]would work.
Here is a screenshot so you can see the backtick in action.
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
answered Mar 17 at 12:44
BradBrad
3312
$endgroup$
$begingroup$
Thank you so much for your kind response. Are you talking about this symbol '' ~ ''. I just type "<<PackageName(~)" in the notebook, but it does not work. I also type ''<<~'', it also does not work. Sorry to say, I am facing difficulty to learn from the example.
$endgroup$
– Misbah Shahzadi
Mar 17 at 14:13
$begingroup$
I have added a screenshot. You are on the right key I think, but instead you have held-down shift instead. It's a tricky key to type, but my screenshot should help you.
$endgroup$
– Brad
Mar 17 at 14:17
1
$begingroup$
It's tricky but: enclose any code that has backticks in double backticks. I did this for your answer.
$endgroup$
– J. M. is slightly pensive♦
Mar 17 at 14:23
$begingroup$
@J.M.isslightlypensive that's one of the worst things that to look at - 5 backticks is far too many. Thanks for your help JM.
$endgroup$
– Brad
Mar 17 at 14:24
$begingroup$
Now, I followed your suggestions and type. But, I found the error. I am pasting here both input and output which I got. In[8]:= <<PackageName` Get["PackageName.m"] During evaluation of In[8]:= Get::noopen: Cannot open PackageName`. Out[8]= $Failed During evaluation of In[8]:= Get::noopen: Cannot open PackageName.m. Out[9]= $Failed
$endgroup$
– Misbah Shahzadi
Mar 17 at 15:27
|
show 3 more comments
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "387"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmathematica.stackexchange.com%2fquestions%2f193413%2frunning-file-with-some-extension%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
2
$begingroup$
If a file has the extension .m, then I assume you are trying to load a package into your notebook. This can be achieved by calling the package (say called PackageName.m) into your own notebook by doing the following:
You can type into your opening like
<<PackageName`, which uses the backtick symbol`. It is probably at the left hand side of your keyboard.Alternatively, this is a shortcut for the MMA function
Get, given in the documentation here. The first example has the above notation I was talking about. ThenGet["PackageName.m"]would work.
Here is a screenshot so you can see the backtick in action.
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
answered Mar 17 at 12:44
BradBrad
3312
$endgroup$
$begingroup$
Thank you so much for your kind response. Are you talking about this symbol '' ~ ''. I just type "<<PackageName(~)" in the notebook, but it does not work. I also type ''<<~'', it also does not work. Sorry to say, I am facing difficulty to learn from the example.
$endgroup$
– Misbah Shahzadi
Mar 17 at 14:13
$begingroup$
I have added a screenshot. You are on the right key I think, but instead you have held-down shift instead. It's a tricky key to type, but my screenshot should help you.
$endgroup$
– Brad
Mar 17 at 14:17
1
$begingroup$
It's tricky but: enclose any code that has backticks in double backticks. I did this for your answer.
$endgroup$
– J. M. is slightly pensive♦
Mar 17 at 14:23
$begingroup$
@J.M.isslightlypensive that's one of the worst things that to look at - 5 backticks is far too many. Thanks for your help JM.
$endgroup$
– Brad
Mar 17 at 14:24
$begingroup$
Now, I followed your suggestions and type. But, I found the error. I am pasting here both input and output which I got. In[8]:= <<PackageName` Get["PackageName.m"] During evaluation of In[8]:= Get::noopen: Cannot open PackageName`. Out[8]= $Failed During evaluation of In[8]:= Get::noopen: Cannot open PackageName.m. Out[9]= $Failed
$endgroup$
– Misbah Shahzadi
Mar 17 at 15:27
|
show 3 more comments
2
$begingroup$
If a file has the extension .m, then I assume you are trying to load a package into your notebook. This can be achieved by calling the package (say called PackageName.m) into your own notebook by doing the following:
You can type into your opening like
<<PackageName`, which uses the backtick symbol`. It is probably at the left hand side of your keyboard.Alternatively, this is a shortcut for the MMA function
Get, given in the documentation here. The first example has the above notation I was talking about. ThenGet["PackageName.m"]would work.
Here is a screenshot so you can see the backtick in action.
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
answered Mar 17 at 12:44
BradBrad
3312
$endgroup$
$begingroup$
Thank you so much for your kind response. Are you talking about this symbol '' ~ ''. I just type "<<PackageName(~)" in the notebook, but it does not work. I also type ''<<~'', it also does not work. Sorry to say, I am facing difficulty to learn from the example.
$endgroup$
– Misbah Shahzadi
Mar 17 at 14:13
$begingroup$
I have added a screenshot. You are on the right key I think, but instead you have held-down shift instead. It's a tricky key to type, but my screenshot should help you.
$endgroup$
– Brad
Mar 17 at 14:17
1
$begingroup$
It's tricky but: enclose any code that has backticks in double backticks. I did this for your answer.
$endgroup$
– J. M. is slightly pensive♦
Mar 17 at 14:23
$begingroup$
@J.M.isslightlypensive that's one of the worst things that to look at - 5 backticks is far too many. Thanks for your help JM.
$endgroup$
– Brad
Mar 17 at 14:24
$begingroup$
Now, I followed your suggestions and type. But, I found the error. I am pasting here both input and output which I got. In[8]:= <<PackageName` Get["PackageName.m"] During evaluation of In[8]:= Get::noopen: Cannot open PackageName`. Out[8]= $Failed During evaluation of In[8]:= Get::noopen: Cannot open PackageName.m. Out[9]= $Failed
$endgroup$
– Misbah Shahzadi
Mar 17 at 15:27
|
show 3 more comments
2
2
2
$begingroup$
If a file has the extension .m, then I assume you are trying to load a package into your notebook. This can be achieved by calling the package (say called PackageName.m) into your own notebook by doing the following:
You can type into your opening like
<<PackageName`, which uses the backtick symbol`. It is probably at the left hand side of your keyboard.Alternatively, this is a shortcut for the MMA function
Get, given in the documentation here. The first example has the above notation I was talking about. ThenGet["PackageName.m"]would work.
Here is a screenshot so you can see the backtick in action.
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
answered Mar 17 at 12:44
BradBrad
3312
$endgroup$
If a file has the extension .m, then I assume you are trying to load a package into your notebook. This can be achieved by calling the package (say called PackageName.m) into your own notebook by doing the following:
You can type into your opening like
<<PackageName`, which uses the backtick symbol`. It is probably at the left hand side of your keyboard.Alternatively, this is a shortcut for the MMA function
Get, given in the documentation here. The first example has the above notation I was talking about. ThenGet["PackageName.m"]would work.
Here is a screenshot so you can see the backtick in action.
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
answered Mar 17 at 12:44
BradBrad
3312
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
edited Mar 17 at 14:22
J. M. is slightly pensive♦
98.5k10309466
98.5k10309466
answered Mar 17 at 12:44
BradBrad
3312
answered Mar 17 at 12:44
BradBrad
3312
answered Mar 17 at 12:44
BradBrad
3312
3312
$begingroup$
Thank you so much for your kind response. Are you talking about this symbol '' ~ ''. I just type "<<PackageName(~)" in the notebook, but it does not work. I also type ''<<~'', it also does not work. Sorry to say, I am facing difficulty to learn from the example.
$endgroup$
– Misbah Shahzadi
Mar 17 at 14:13
$begingroup$
I have added a screenshot. You are on the right key I think, but instead you have held-down shift instead. It's a tricky key to type, but my screenshot should help you.
$endgroup$
– Brad
Mar 17 at 14:17
1
$begingroup$
It's tricky but: enclose any code that has backticks in double backticks. I did this for your answer.
$endgroup$
– J. M. is slightly pensive♦
Mar 17 at 14:23
$begingroup$
@J.M.isslightlypensive that's one of the worst things that to look at - 5 backticks is far too many. Thanks for your help JM.
$endgroup$
– Brad
Mar 17 at 14:24
$begingroup$
Now, I followed your suggestions and type. But, I found the error. I am pasting here both input and output which I got. In[8]:= <<PackageName` Get["PackageName.m"] During evaluation of In[8]:= Get::noopen: Cannot open PackageName`. Out[8]= $Failed During evaluation of In[8]:= Get::noopen: Cannot open PackageName.m. Out[9]= $Failed
$endgroup$
– Misbah Shahzadi
Mar 17 at 15:27
|
show 3 more comments
$begingroup$
Thank you so much for your kind response. Are you talking about this symbol '' ~ ''. I just type "<<PackageName(~)" in the notebook, but it does not work. I also type ''<<~'', it also does not work. Sorry to say, I am facing difficulty to learn from the example.
$endgroup$
– Misbah Shahzadi
Mar 17 at 14:13
$begingroup$
I have added a screenshot. You are on the right key I think, but instead you have held-down shift instead. It's a tricky key to type, but my screenshot should help you.
$endgroup$
– Brad
Mar 17 at 14:17
1
$begingroup$
It's tricky but: enclose any code that has backticks in double backticks. I did this for your answer.
$endgroup$
– J. M. is slightly pensive♦
Mar 17 at 14:23
$begingroup$
@J.M.isslightlypensive that's one of the worst things that to look at - 5 backticks is far too many. Thanks for your help JM.
$endgroup$
– Brad
Mar 17 at 14:24
$begingroup$
Now, I followed your suggestions and type. But, I found the error. I am pasting here both input and output which I got. In[8]:= <<PackageName` Get["PackageName.m"] During evaluation of In[8]:= Get::noopen: Cannot open PackageName`. Out[8]= $Failed During evaluation of In[8]:= Get::noopen: Cannot open PackageName.m. Out[9]= $Failed
$endgroup$
– Misbah Shahzadi
Mar 17 at 15:27
$begingroup$
Thank you so much for your kind response. Are you talking about this symbol '' ~ ''. I just type "<<PackageName(~)" in the notebook, but it does not work. I also type ''<<~'', it also does not work. Sorry to say, I am facing difficulty to learn from the example.
$endgroup$
– Misbah Shahzadi
Mar 17 at 14:13
$begingroup$
Thank you so much for your kind response. Are you talking about this symbol '' ~ ''. I just type "<<PackageName(~)" in the notebook, but it does not work. I also type ''<<~'', it also does not work. Sorry to say, I am facing difficulty to learn from the example.
$endgroup$
– Misbah Shahzadi
Mar 17 at 14:13
$begingroup$
I have added a screenshot. You are on the right key I think, but instead you have held-down shift instead. It's a tricky key to type, but my screenshot should help you.
$endgroup$
– Brad
Mar 17 at 14:17
$begingroup$
I have added a screenshot. You are on the right key I think, but instead you have held-down shift instead. It's a tricky key to type, but my screenshot should help you.
$endgroup$
– Brad
Mar 17 at 14:17
1
1
$begingroup$
It's tricky but: enclose any code that has backticks in double backticks. I did this for your answer.
$endgroup$
– J. M. is slightly pensive♦
Mar 17 at 14:23
$begingroup$
It's tricky but: enclose any code that has backticks in double backticks. I did this for your answer.
$endgroup$
– J. M. is slightly pensive♦
Mar 17 at 14:23
$begingroup$
@J.M.isslightlypensive that's one of the worst things that to look at - 5 backticks is far too many. Thanks for your help JM.
$endgroup$
– Brad
Mar 17 at 14:24
$begingroup$
@J.M.isslightlypensive that's one of the worst things that to look at - 5 backticks is far too many. Thanks for your help JM.
$endgroup$
– Brad
Mar 17 at 14:24
$begingroup$
Now, I followed your suggestions and type. But, I found the error. I am pasting here both input and output which I got. In[8]:= <<PackageName` Get["PackageName.m"] During evaluation of In[8]:= Get::noopen: Cannot open PackageName`. Out[8]= $Failed During evaluation of In[8]:= Get::noopen: Cannot open PackageName.m. Out[9]= $Failed
$endgroup$
– Misbah Shahzadi
Mar 17 at 15:27
$begingroup$
Now, I followed your suggestions and type. But, I found the error. I am pasting here both input and output which I got. In[8]:= <<PackageName` Get["PackageName.m"] During evaluation of In[8]:= Get::noopen: Cannot open PackageName`. Out[8]= $Failed During evaluation of In[8]:= Get::noopen: Cannot open PackageName.m. Out[9]= $Failed
$endgroup$
– Misbah Shahzadi
Mar 17 at 15:27
|
show 3 more comments
draft saved
draft discarded
Thanks for contributing an answer to Mathematica Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmathematica.stackexchange.com%2fquestions%2f193413%2frunning-file-with-some-extension%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
$begingroup$
Have a look at
Get.$endgroup$
– Henrik Schumacher
Mar 17 at 12:25
$begingroup$
To keep it simple, pass the full path to the file to the
Getfunction. That's all.$endgroup$
– Szabolcs
Mar 18 at 12:12
$begingroup$
what is ''Get''? There is no link. I can't open this. How can I pass the full path to the file? Can you help me Please? I have Mathematica 11.3 in my system. But, not able to run the code in file with extension ''.m''.
$endgroup$
– Misbah Shahzadi
Mar 18 at 13:26
$begingroup$
Please help me. Actually I don't know about packages. So, I am facing difficulties.
$endgroup$
– Misbah Shahzadi
Mar 18 at 18:17