Wrong nameserver set by resolvconf and NetworkManager
My DNS server is 192.168.1.152
.
This DNS is provided to clients by DHCP. The windows clients on my LAN resolve names properly using that DNS, but my Ubuntu VM doesn't.
The VM is set up with bridge networking and is being properly provided the DNS server, but my local hostnames aren't being resolved by nslookup or browsers.
Here is an nslookup
of one of my local domains:
# nslookup unraid.local
Server: 127.0.0.53
Address: 127.0.0.53#53
** server can't find unraid.local: SERVFAIL
Here is what it should resolve by using my DNS server:
# nslookup unraid.local 192.168.1.152
Server: 192.168.1.152
Address: 192.168.1.152#53
Name: unraid.local
Address: 192.168.1.152
/etc/resolv.conf
has a wrong nameserver:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 127.0.0.53
I ran that command. Under DNS Servers, confusingly, it specifies the correct server (and my default gateway).
root@ubuntu:~# systemd-resolve --status
Global
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
20.172.in-addr.arpa
21.172.in-addr.arpa
22.172.in-addr.arpa
23.172.in-addr.arpa
24.172.in-addr.arpa
25.172.in-addr.arpa
26.172.in-addr.arpa
27.172.in-addr.arpa
28.172.in-addr.arpa
29.172.in-addr.arpa
30.172.in-addr.arpa
31.172.in-addr.arpa
corp
d.f.ip6.arpa
home
internal
intranet
lan
local
private
test
Link 2 (ens33)
Current Scopes: DNS LLMNR/IPv4 LLMNR/IPv6
LLMNR setting: yes
MulticastDNS setting: no
DNSSEC setting: no
DNSSEC supported: no
DNS Servers: 192.168.1.152
192.168.1.1
I don't want to "hard code" the DNS server's IP in a config file because I won't be able to resolve when I change networks.
How can I get resolvconf and NetworkManager to automatically set the DHCP server's IP in /etc/resolv.conf
?
networking dns 17.10 dhcp
add a comment |
My DNS server is 192.168.1.152
.
This DNS is provided to clients by DHCP. The windows clients on my LAN resolve names properly using that DNS, but my Ubuntu VM doesn't.
The VM is set up with bridge networking and is being properly provided the DNS server, but my local hostnames aren't being resolved by nslookup or browsers.
Here is an nslookup
of one of my local domains:
# nslookup unraid.local
Server: 127.0.0.53
Address: 127.0.0.53#53
** server can't find unraid.local: SERVFAIL
Here is what it should resolve by using my DNS server:
# nslookup unraid.local 192.168.1.152
Server: 192.168.1.152
Address: 192.168.1.152#53
Name: unraid.local
Address: 192.168.1.152
/etc/resolv.conf
has a wrong nameserver:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 127.0.0.53
I ran that command. Under DNS Servers, confusingly, it specifies the correct server (and my default gateway).
root@ubuntu:~# systemd-resolve --status
Global
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
20.172.in-addr.arpa
21.172.in-addr.arpa
22.172.in-addr.arpa
23.172.in-addr.arpa
24.172.in-addr.arpa
25.172.in-addr.arpa
26.172.in-addr.arpa
27.172.in-addr.arpa
28.172.in-addr.arpa
29.172.in-addr.arpa
30.172.in-addr.arpa
31.172.in-addr.arpa
corp
d.f.ip6.arpa
home
internal
intranet
lan
local
private
test
Link 2 (ens33)
Current Scopes: DNS LLMNR/IPv4 LLMNR/IPv6
LLMNR setting: yes
MulticastDNS setting: no
DNSSEC setting: no
DNSSEC supported: no
DNS Servers: 192.168.1.152
192.168.1.1
I don't want to "hard code" the DNS server's IP in a config file because I won't be able to resolve when I change networks.
How can I get resolvconf and NetworkManager to automatically set the DHCP server's IP in /etc/resolv.conf
?
networking dns 17.10 dhcp
add a comment |
My DNS server is 192.168.1.152
.
This DNS is provided to clients by DHCP. The windows clients on my LAN resolve names properly using that DNS, but my Ubuntu VM doesn't.
The VM is set up with bridge networking and is being properly provided the DNS server, but my local hostnames aren't being resolved by nslookup or browsers.
Here is an nslookup
of one of my local domains:
# nslookup unraid.local
Server: 127.0.0.53
Address: 127.0.0.53#53
** server can't find unraid.local: SERVFAIL
Here is what it should resolve by using my DNS server:
# nslookup unraid.local 192.168.1.152
Server: 192.168.1.152
Address: 192.168.1.152#53
Name: unraid.local
Address: 192.168.1.152
/etc/resolv.conf
has a wrong nameserver:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 127.0.0.53
I ran that command. Under DNS Servers, confusingly, it specifies the correct server (and my default gateway).
root@ubuntu:~# systemd-resolve --status
Global
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
20.172.in-addr.arpa
21.172.in-addr.arpa
22.172.in-addr.arpa
23.172.in-addr.arpa
24.172.in-addr.arpa
25.172.in-addr.arpa
26.172.in-addr.arpa
27.172.in-addr.arpa
28.172.in-addr.arpa
29.172.in-addr.arpa
30.172.in-addr.arpa
31.172.in-addr.arpa
corp
d.f.ip6.arpa
home
internal
intranet
lan
local
private
test
Link 2 (ens33)
Current Scopes: DNS LLMNR/IPv4 LLMNR/IPv6
LLMNR setting: yes
MulticastDNS setting: no
DNSSEC setting: no
DNSSEC supported: no
DNS Servers: 192.168.1.152
192.168.1.1
I don't want to "hard code" the DNS server's IP in a config file because I won't be able to resolve when I change networks.
How can I get resolvconf and NetworkManager to automatically set the DHCP server's IP in /etc/resolv.conf
?
networking dns 17.10 dhcp
My DNS server is 192.168.1.152
.
This DNS is provided to clients by DHCP. The windows clients on my LAN resolve names properly using that DNS, but my Ubuntu VM doesn't.
The VM is set up with bridge networking and is being properly provided the DNS server, but my local hostnames aren't being resolved by nslookup or browsers.
Here is an nslookup
of one of my local domains:
# nslookup unraid.local
Server: 127.0.0.53
Address: 127.0.0.53#53
** server can't find unraid.local: SERVFAIL
Here is what it should resolve by using my DNS server:
# nslookup unraid.local 192.168.1.152
Server: 192.168.1.152
Address: 192.168.1.152#53
Name: unraid.local
Address: 192.168.1.152
/etc/resolv.conf
has a wrong nameserver:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 127.0.0.53
I ran that command. Under DNS Servers, confusingly, it specifies the correct server (and my default gateway).
root@ubuntu:~# systemd-resolve --status
Global
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
20.172.in-addr.arpa
21.172.in-addr.arpa
22.172.in-addr.arpa
23.172.in-addr.arpa
24.172.in-addr.arpa
25.172.in-addr.arpa
26.172.in-addr.arpa
27.172.in-addr.arpa
28.172.in-addr.arpa
29.172.in-addr.arpa
30.172.in-addr.arpa
31.172.in-addr.arpa
corp
d.f.ip6.arpa
home
internal
intranet
lan
local
private
test
Link 2 (ens33)
Current Scopes: DNS LLMNR/IPv4 LLMNR/IPv6
LLMNR setting: yes
MulticastDNS setting: no
DNSSEC setting: no
DNSSEC supported: no
DNS Servers: 192.168.1.152
192.168.1.1
I don't want to "hard code" the DNS server's IP in a config file because I won't be able to resolve when I change networks.
How can I get resolvconf and NetworkManager to automatically set the DHCP server's IP in /etc/resolv.conf
?
networking dns 17.10 dhcp
networking dns 17.10 dhcp
edited Feb 14 '18 at 21:10
Victor
6,01171830
6,01171830
asked Nov 4 '17 at 21:22
FireSporeFireSpore
116115
116115
add a comment |
add a comment |
8 Answers
8
active
oldest
votes
Try editing /etc/systemd/resolved.conf
, adding your desired DNS server:
change this:
[Resolve]
#DNS=
to this (but use the one you want - this is an example):
[Resolve]
DNS=192.168.1.152
after that, restart the service:
service systemd-resolved restart
And when you check the status you should see
$ systemd-resolve --status
Global
DNS Servers: 192.168.1.152
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
Here is the systemd-resolve --status after changing /etc/systemd/resolved.conf pastebin.com/AeUFQkyB Browsers still fail to resolve names also.
– FireSpore
Nov 4 '17 at 22:10
7
systemd is so broken. DHCP tells the host what DNS should be, (and a bunch of other network settings) you should not have to change any files on the host for this to work.
– teknopaul
Nov 8 '17 at 22:55
2
Does not look optimal, you will have to do this every time you change DNS server/network
– Victor
Feb 14 '18 at 21:23
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:40
add a comment |
Known systemd bug.
Temporary workaround with no need to reconfigure if the DNS IP's changes:
sudo rm -f /etc/resolv.conf
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
reboot
1
This solution worked somewhat, host and nslookup commands resolve names properly, but wget and browsers are not
– FireSpore
Nov 11 '17 at 5:39
add a comment |
I finally got a solution for this problem for ubuntu 17.10. By default this version of Ubuntu uses systemd-resolved
, which I hope is going to be stable for the next versions.
In order to use custom dns instead of the local systemd-resolved cache, do the following:
add new nameservers. Edit the file in
/etc/systemd/resolved.conf
as sudoer. Here I've commented out the DNS entry and placed my dns
[Resolve]
DNS=10.96.0.10 8.8.8.8 8.8.4.4
cancel the actual symlink to
/etc/resolv.conf
- create a new symlink
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
- restart the service
sudo service systemd-resolved restart
- restart the network manager
sudo systemctl restart networking
And now if you dig to a name provided by your add dns, you should see the record resolved dig nexus.default.svc.cluster.mydomain
Last step is to update the order of resolution in /etc/nsswitch.conf
, by placing the dns before the mdns4_minimal
hosts files dns mdns4_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] myhostname
1
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
Victor do you have a best solution? this is the same if you use static net config
– Fabio Fumarola
Feb 16 '18 at 15:19
This answer works for both static and dynamic configurations: askubuntu.com/a/974482/343617
– Victor
Feb 16 '18 at 15:41
thank you, the solution I have pointed out was static. I agree
– Fabio Fumarola
Feb 18 '18 at 11:39
add a comment |
I put together a script that works around the issue of Netplan not currently supporting the ability to supersede DHCP supplied DNS servers and domain search order. It creates the Netplan yaml file and configures systemd-resolved to work as expected.
################## Start Netplan config (renderer: NetworkManager)
# Some useful commands for customisation
# NetConn=$(nmcli device show|grep GENERAL.CONNECTION|head -n1|awk '{print $2}')
# IP=$(nmcli device show|grep IP4.ADDRESS|head -n1|awk '{print $2}')
# GATEWAY=$(nmcli device show|grep IP4.GATEWAY|head -n1|awk '{print $2}')
# sed -i 's/renderer: networkd/renderer: NetworkManager/' //etc/netplan/01-netcfg.yaml
######################################
systemctl start NetworkManager
NIC=$(nmcli device show|grep GENERAL.DEVICE|head -n1|awk '{print $2}')
##### create Netplan yaml config file
cat >/etc/netplan/01-netcfg.yaml <<EOF
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
version: 2
renderer: NetworkManager
ethernets:
EOF
echo " ${NIC}:" >> /etc/netplan/01-netcfg.yaml
cat >>/etc/netplan/01-netcfg.yaml <<EOF
dhcp4: yes
nameservers:
search: [abc.domain.edu, def.domain.edu]
addresses: [10.10.11.22, 10.10.11.23]
EOF
#work around DNS resolv bug
systemctl stop systemd-resolved
sed -i 's/#DNS=/DNS=10.10.11.22 10.10.11.23/' /etc/systemd/resolved.conf
sed -i 's/#Domains=/Domains=abc.domain.edu def.domain.edu' /etc/systemd/resolved.conf
systemctl start systemd-resolved
systemctl restart NetworkManager
netplan apply
reboot
############### End Netplan Config
add a comment |
The solution that worked for me is posted here on my blog
Use nano editor to edit these 2 files
nano /etc/resolv.conf
nano /etc/resolvconf/resolv.conf.d/head
Add DNS servers you want to use
nameserver 9.9.9.9
nameserver 127.0.0.1
Then restart the service
service systemd-resolved restart
Final check:
cat /etc/resolv.conf
Do nslookup
nslookup google.com
i just used this and it fixed the problem on my laptop at home, but some time in the future when I am out of my home network I can see that it will cause problems, because the primary and secondary dns server will still be my home servers with their lan addresses.
2
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
it's not elegant, but it work's gcloud sometimes sabotage my bedtime.
– Rodrigo Ferrari
Jun 2 '18 at 4:39
Editing/etc/resolv.conf
doesn't work as the file will be overwritten during thesystemd-resolved
restart. Just edit/etc/systemd/resolved.conf
. See my answer here: askubuntu.com/questions/977243/ubuntu-17-10-disable-netplan/…
– EnzoR
Oct 2 '18 at 16:01
add a comment |
Your /etc/resolv.conf
is not the problem. systemd-resolved
just defaults to unconfigured, so it fails all lookups. Feel free to rant about Unconfigured vs A Reasonable Default.
Manually add nameservers to systemd-resolved
.
(editing per Olorin's comment below to add mkdir
, correct path /etc
not /lib
, in order to survive system updates)
sudo mkdir -p /etc/systemd/resolved.conf.d
sudo nano /etc/systemd/resolved.conf.d/00-my-dns-server-is.conf
Add:
[Resolved]
Cache=yes
DNS=192.168.1.152
Then...
sudo systemctl daemon-reload
systemd-resolved
is smart, but, unconfigured as it is, by package maintainers, it just LOOKS stupid because package maintainers do not believe in A Reasonable Default. We can put 13 internet root servers in there aka "djb way", or 10 opennic servers: https://pastebin.com/JBfYVVtG or the three fastest opennic servers, as measured by namebench. Plus ISP nameservers, sure. Plus Google, sure. systemd-resolved
is not the problem. I am the problem.
Though you probably don't want to edit a file/usr/lib
- those will likely be overwritten on package upgrade. I think a corresponding file somewhere in/etc/systemd
is the way to go (it already should have an/etc/systemd/resolved.conf
ready to be edited by admins).
– Olorin
Jan 23 at 4:16
1
man resolved.conf.d, with the d, yes /etc/systemd/resolved.d is the place. I'm noticing that we often have to mkdir /etc/[path].d. bob@laptop l /etc/systemd/resolved.conf.d ls: cannot access '/etc/systemd/resolved.conf.d': No such file or directory
– BobDodds
Jan 23 at 4:20
add a comment |
On my system I found a bad symlink: /etc/resolv.conf
was a symlink which points to /run/systemd/resolve/stub-resolv.conf
This file contains only one line:
nameserver 127.0.0.53#53
As a result, the local network's DNS lookup was often missing.
So, instead I changed /etc/reolv.conf
to point to /run/systemd/resolve/resolv.conf
and now works correctly.
add a comment |
I have the same problem. Each reboot, nothing will resolve. I've uninstalled everything and reinstalled it about 50 times already. It's simply just broken.
so the fix is.... "just apply a few settings each time you boot your pc, which allows 90% of host names to resolve but wget and apt-get updates and upgrades will fail randomly for no reason"
cat /etc/systemd/resolved.conf
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See resolved.conf(5) for details
[Resolve]
#DNS=
#FallbackDNS=
#Domains=
#LLMNR=yes
#MulticastDNS=yes
#DNSSEC=no
#Cache=yes
#DNSStubListener=udp
When using Ubuntu 17.10 Desktop, you have to edit the one file that says DO NOT EDIT THIS FILE BLAH BLAH BLAH
well that's the ONLY way it works~!
root@nas:~# cat /etc/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 8.8.8.8
So remove the 127.0.0.53 IP as the name server and enter another one, google for example. It appears my actual DNS IP address doesn't resolve host names either (even though it works on 10 other machines and devices in the house), but google's works fine.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f973017%2fwrong-nameserver-set-by-resolvconf-and-networkmanager%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
8 Answers
8
active
oldest
votes
8 Answers
8
active
oldest
votes
active
oldest
votes
active
oldest
votes
Try editing /etc/systemd/resolved.conf
, adding your desired DNS server:
change this:
[Resolve]
#DNS=
to this (but use the one you want - this is an example):
[Resolve]
DNS=192.168.1.152
after that, restart the service:
service systemd-resolved restart
And when you check the status you should see
$ systemd-resolve --status
Global
DNS Servers: 192.168.1.152
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
Here is the systemd-resolve --status after changing /etc/systemd/resolved.conf pastebin.com/AeUFQkyB Browsers still fail to resolve names also.
– FireSpore
Nov 4 '17 at 22:10
7
systemd is so broken. DHCP tells the host what DNS should be, (and a bunch of other network settings) you should not have to change any files on the host for this to work.
– teknopaul
Nov 8 '17 at 22:55
2
Does not look optimal, you will have to do this every time you change DNS server/network
– Victor
Feb 14 '18 at 21:23
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:40
add a comment |
Try editing /etc/systemd/resolved.conf
, adding your desired DNS server:
change this:
[Resolve]
#DNS=
to this (but use the one you want - this is an example):
[Resolve]
DNS=192.168.1.152
after that, restart the service:
service systemd-resolved restart
And when you check the status you should see
$ systemd-resolve --status
Global
DNS Servers: 192.168.1.152
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
Here is the systemd-resolve --status after changing /etc/systemd/resolved.conf pastebin.com/AeUFQkyB Browsers still fail to resolve names also.
– FireSpore
Nov 4 '17 at 22:10
7
systemd is so broken. DHCP tells the host what DNS should be, (and a bunch of other network settings) you should not have to change any files on the host for this to work.
– teknopaul
Nov 8 '17 at 22:55
2
Does not look optimal, you will have to do this every time you change DNS server/network
– Victor
Feb 14 '18 at 21:23
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:40
add a comment |
Try editing /etc/systemd/resolved.conf
, adding your desired DNS server:
change this:
[Resolve]
#DNS=
to this (but use the one you want - this is an example):
[Resolve]
DNS=192.168.1.152
after that, restart the service:
service systemd-resolved restart
And when you check the status you should see
$ systemd-resolve --status
Global
DNS Servers: 192.168.1.152
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
Try editing /etc/systemd/resolved.conf
, adding your desired DNS server:
change this:
[Resolve]
#DNS=
to this (but use the one you want - this is an example):
[Resolve]
DNS=192.168.1.152
after that, restart the service:
service systemd-resolved restart
And when you check the status you should see
$ systemd-resolve --status
Global
DNS Servers: 192.168.1.152
DNSSEC NTA: 10.in-addr.arpa
16.172.in-addr.arpa
168.192.in-addr.arpa
17.172.in-addr.arpa
18.172.in-addr.arpa
19.172.in-addr.arpa
edited Dec 7 '17 at 15:11
Zanna
51k13137241
51k13137241
answered Nov 4 '17 at 22:02
Leandro NoskoskiLeandro Noskoski
35923
35923
Here is the systemd-resolve --status after changing /etc/systemd/resolved.conf pastebin.com/AeUFQkyB Browsers still fail to resolve names also.
– FireSpore
Nov 4 '17 at 22:10
7
systemd is so broken. DHCP tells the host what DNS should be, (and a bunch of other network settings) you should not have to change any files on the host for this to work.
– teknopaul
Nov 8 '17 at 22:55
2
Does not look optimal, you will have to do this every time you change DNS server/network
– Victor
Feb 14 '18 at 21:23
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:40
add a comment |
Here is the systemd-resolve --status after changing /etc/systemd/resolved.conf pastebin.com/AeUFQkyB Browsers still fail to resolve names also.
– FireSpore
Nov 4 '17 at 22:10
7
systemd is so broken. DHCP tells the host what DNS should be, (and a bunch of other network settings) you should not have to change any files on the host for this to work.
– teknopaul
Nov 8 '17 at 22:55
2
Does not look optimal, you will have to do this every time you change DNS server/network
– Victor
Feb 14 '18 at 21:23
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:40
Here is the systemd-resolve --status after changing /etc/systemd/resolved.conf pastebin.com/AeUFQkyB Browsers still fail to resolve names also.
– FireSpore
Nov 4 '17 at 22:10
Here is the systemd-resolve --status after changing /etc/systemd/resolved.conf pastebin.com/AeUFQkyB Browsers still fail to resolve names also.
– FireSpore
Nov 4 '17 at 22:10
7
7
systemd is so broken. DHCP tells the host what DNS should be, (and a bunch of other network settings) you should not have to change any files on the host for this to work.
– teknopaul
Nov 8 '17 at 22:55
systemd is so broken. DHCP tells the host what DNS should be, (and a bunch of other network settings) you should not have to change any files on the host for this to work.
– teknopaul
Nov 8 '17 at 22:55
2
2
Does not look optimal, you will have to do this every time you change DNS server/network
– Victor
Feb 14 '18 at 21:23
Does not look optimal, you will have to do this every time you change DNS server/network
– Victor
Feb 14 '18 at 21:23
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:40
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:40
add a comment |
Known systemd bug.
Temporary workaround with no need to reconfigure if the DNS IP's changes:
sudo rm -f /etc/resolv.conf
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
reboot
1
This solution worked somewhat, host and nslookup commands resolve names properly, but wget and browsers are not
– FireSpore
Nov 11 '17 at 5:39
add a comment |
Known systemd bug.
Temporary workaround with no need to reconfigure if the DNS IP's changes:
sudo rm -f /etc/resolv.conf
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
reboot
1
This solution worked somewhat, host and nslookup commands resolve names properly, but wget and browsers are not
– FireSpore
Nov 11 '17 at 5:39
add a comment |
Known systemd bug.
Temporary workaround with no need to reconfigure if the DNS IP's changes:
sudo rm -f /etc/resolv.conf
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
reboot
Known systemd bug.
Temporary workaround with no need to reconfigure if the DNS IP's changes:
sudo rm -f /etc/resolv.conf
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
reboot
edited Feb 14 '18 at 23:37
Victor
6,01171830
6,01171830
answered Nov 8 '17 at 22:53
teknopaulteknopaul
90669
90669
1
This solution worked somewhat, host and nslookup commands resolve names properly, but wget and browsers are not
– FireSpore
Nov 11 '17 at 5:39
add a comment |
1
This solution worked somewhat, host and nslookup commands resolve names properly, but wget and browsers are not
– FireSpore
Nov 11 '17 at 5:39
1
1
This solution worked somewhat, host and nslookup commands resolve names properly, but wget and browsers are not
– FireSpore
Nov 11 '17 at 5:39
This solution worked somewhat, host and nslookup commands resolve names properly, but wget and browsers are not
– FireSpore
Nov 11 '17 at 5:39
add a comment |
I finally got a solution for this problem for ubuntu 17.10. By default this version of Ubuntu uses systemd-resolved
, which I hope is going to be stable for the next versions.
In order to use custom dns instead of the local systemd-resolved cache, do the following:
add new nameservers. Edit the file in
/etc/systemd/resolved.conf
as sudoer. Here I've commented out the DNS entry and placed my dns
[Resolve]
DNS=10.96.0.10 8.8.8.8 8.8.4.4
cancel the actual symlink to
/etc/resolv.conf
- create a new symlink
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
- restart the service
sudo service systemd-resolved restart
- restart the network manager
sudo systemctl restart networking
And now if you dig to a name provided by your add dns, you should see the record resolved dig nexus.default.svc.cluster.mydomain
Last step is to update the order of resolution in /etc/nsswitch.conf
, by placing the dns before the mdns4_minimal
hosts files dns mdns4_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] myhostname
1
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
Victor do you have a best solution? this is the same if you use static net config
– Fabio Fumarola
Feb 16 '18 at 15:19
This answer works for both static and dynamic configurations: askubuntu.com/a/974482/343617
– Victor
Feb 16 '18 at 15:41
thank you, the solution I have pointed out was static. I agree
– Fabio Fumarola
Feb 18 '18 at 11:39
add a comment |
I finally got a solution for this problem for ubuntu 17.10. By default this version of Ubuntu uses systemd-resolved
, which I hope is going to be stable for the next versions.
In order to use custom dns instead of the local systemd-resolved cache, do the following:
add new nameservers. Edit the file in
/etc/systemd/resolved.conf
as sudoer. Here I've commented out the DNS entry and placed my dns
[Resolve]
DNS=10.96.0.10 8.8.8.8 8.8.4.4
cancel the actual symlink to
/etc/resolv.conf
- create a new symlink
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
- restart the service
sudo service systemd-resolved restart
- restart the network manager
sudo systemctl restart networking
And now if you dig to a name provided by your add dns, you should see the record resolved dig nexus.default.svc.cluster.mydomain
Last step is to update the order of resolution in /etc/nsswitch.conf
, by placing the dns before the mdns4_minimal
hosts files dns mdns4_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] myhostname
1
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
Victor do you have a best solution? this is the same if you use static net config
– Fabio Fumarola
Feb 16 '18 at 15:19
This answer works for both static and dynamic configurations: askubuntu.com/a/974482/343617
– Victor
Feb 16 '18 at 15:41
thank you, the solution I have pointed out was static. I agree
– Fabio Fumarola
Feb 18 '18 at 11:39
add a comment |
I finally got a solution for this problem for ubuntu 17.10. By default this version of Ubuntu uses systemd-resolved
, which I hope is going to be stable for the next versions.
In order to use custom dns instead of the local systemd-resolved cache, do the following:
add new nameservers. Edit the file in
/etc/systemd/resolved.conf
as sudoer. Here I've commented out the DNS entry and placed my dns
[Resolve]
DNS=10.96.0.10 8.8.8.8 8.8.4.4
cancel the actual symlink to
/etc/resolv.conf
- create a new symlink
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
- restart the service
sudo service systemd-resolved restart
- restart the network manager
sudo systemctl restart networking
And now if you dig to a name provided by your add dns, you should see the record resolved dig nexus.default.svc.cluster.mydomain
Last step is to update the order of resolution in /etc/nsswitch.conf
, by placing the dns before the mdns4_minimal
hosts files dns mdns4_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] myhostname
I finally got a solution for this problem for ubuntu 17.10. By default this version of Ubuntu uses systemd-resolved
, which I hope is going to be stable for the next versions.
In order to use custom dns instead of the local systemd-resolved cache, do the following:
add new nameservers. Edit the file in
/etc/systemd/resolved.conf
as sudoer. Here I've commented out the DNS entry and placed my dns
[Resolve]
DNS=10.96.0.10 8.8.8.8 8.8.4.4
cancel the actual symlink to
/etc/resolv.conf
- create a new symlink
sudo ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
- restart the service
sudo service systemd-resolved restart
- restart the network manager
sudo systemctl restart networking
And now if you dig to a name provided by your add dns, you should see the record resolved dig nexus.default.svc.cluster.mydomain
Last step is to update the order of resolution in /etc/nsswitch.conf
, by placing the dns before the mdns4_minimal
hosts files dns mdns4_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] myhostname
edited Jan 30 '18 at 9:56
answered Jan 30 '18 at 9:50
Fabio FumarolaFabio Fumarola
1393
1393
1
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
Victor do you have a best solution? this is the same if you use static net config
– Fabio Fumarola
Feb 16 '18 at 15:19
This answer works for both static and dynamic configurations: askubuntu.com/a/974482/343617
– Victor
Feb 16 '18 at 15:41
thank you, the solution I have pointed out was static. I agree
– Fabio Fumarola
Feb 18 '18 at 11:39
add a comment |
1
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
Victor do you have a best solution? this is the same if you use static net config
– Fabio Fumarola
Feb 16 '18 at 15:19
This answer works for both static and dynamic configurations: askubuntu.com/a/974482/343617
– Victor
Feb 16 '18 at 15:41
thank you, the solution I have pointed out was static. I agree
– Fabio Fumarola
Feb 18 '18 at 11:39
1
1
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
Victor do you have a best solution? this is the same if you use static net config
– Fabio Fumarola
Feb 16 '18 at 15:19
Victor do you have a best solution? this is the same if you use static net config
– Fabio Fumarola
Feb 16 '18 at 15:19
This answer works for both static and dynamic configurations: askubuntu.com/a/974482/343617
– Victor
Feb 16 '18 at 15:41
This answer works for both static and dynamic configurations: askubuntu.com/a/974482/343617
– Victor
Feb 16 '18 at 15:41
thank you, the solution I have pointed out was static. I agree
– Fabio Fumarola
Feb 18 '18 at 11:39
thank you, the solution I have pointed out was static. I agree
– Fabio Fumarola
Feb 18 '18 at 11:39
add a comment |
I put together a script that works around the issue of Netplan not currently supporting the ability to supersede DHCP supplied DNS servers and domain search order. It creates the Netplan yaml file and configures systemd-resolved to work as expected.
################## Start Netplan config (renderer: NetworkManager)
# Some useful commands for customisation
# NetConn=$(nmcli device show|grep GENERAL.CONNECTION|head -n1|awk '{print $2}')
# IP=$(nmcli device show|grep IP4.ADDRESS|head -n1|awk '{print $2}')
# GATEWAY=$(nmcli device show|grep IP4.GATEWAY|head -n1|awk '{print $2}')
# sed -i 's/renderer: networkd/renderer: NetworkManager/' //etc/netplan/01-netcfg.yaml
######################################
systemctl start NetworkManager
NIC=$(nmcli device show|grep GENERAL.DEVICE|head -n1|awk '{print $2}')
##### create Netplan yaml config file
cat >/etc/netplan/01-netcfg.yaml <<EOF
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
version: 2
renderer: NetworkManager
ethernets:
EOF
echo " ${NIC}:" >> /etc/netplan/01-netcfg.yaml
cat >>/etc/netplan/01-netcfg.yaml <<EOF
dhcp4: yes
nameservers:
search: [abc.domain.edu, def.domain.edu]
addresses: [10.10.11.22, 10.10.11.23]
EOF
#work around DNS resolv bug
systemctl stop systemd-resolved
sed -i 's/#DNS=/DNS=10.10.11.22 10.10.11.23/' /etc/systemd/resolved.conf
sed -i 's/#Domains=/Domains=abc.domain.edu def.domain.edu' /etc/systemd/resolved.conf
systemctl start systemd-resolved
systemctl restart NetworkManager
netplan apply
reboot
############### End Netplan Config
add a comment |
I put together a script that works around the issue of Netplan not currently supporting the ability to supersede DHCP supplied DNS servers and domain search order. It creates the Netplan yaml file and configures systemd-resolved to work as expected.
################## Start Netplan config (renderer: NetworkManager)
# Some useful commands for customisation
# NetConn=$(nmcli device show|grep GENERAL.CONNECTION|head -n1|awk '{print $2}')
# IP=$(nmcli device show|grep IP4.ADDRESS|head -n1|awk '{print $2}')
# GATEWAY=$(nmcli device show|grep IP4.GATEWAY|head -n1|awk '{print $2}')
# sed -i 's/renderer: networkd/renderer: NetworkManager/' //etc/netplan/01-netcfg.yaml
######################################
systemctl start NetworkManager
NIC=$(nmcli device show|grep GENERAL.DEVICE|head -n1|awk '{print $2}')
##### create Netplan yaml config file
cat >/etc/netplan/01-netcfg.yaml <<EOF
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
version: 2
renderer: NetworkManager
ethernets:
EOF
echo " ${NIC}:" >> /etc/netplan/01-netcfg.yaml
cat >>/etc/netplan/01-netcfg.yaml <<EOF
dhcp4: yes
nameservers:
search: [abc.domain.edu, def.domain.edu]
addresses: [10.10.11.22, 10.10.11.23]
EOF
#work around DNS resolv bug
systemctl stop systemd-resolved
sed -i 's/#DNS=/DNS=10.10.11.22 10.10.11.23/' /etc/systemd/resolved.conf
sed -i 's/#Domains=/Domains=abc.domain.edu def.domain.edu' /etc/systemd/resolved.conf
systemctl start systemd-resolved
systemctl restart NetworkManager
netplan apply
reboot
############### End Netplan Config
add a comment |
I put together a script that works around the issue of Netplan not currently supporting the ability to supersede DHCP supplied DNS servers and domain search order. It creates the Netplan yaml file and configures systemd-resolved to work as expected.
################## Start Netplan config (renderer: NetworkManager)
# Some useful commands for customisation
# NetConn=$(nmcli device show|grep GENERAL.CONNECTION|head -n1|awk '{print $2}')
# IP=$(nmcli device show|grep IP4.ADDRESS|head -n1|awk '{print $2}')
# GATEWAY=$(nmcli device show|grep IP4.GATEWAY|head -n1|awk '{print $2}')
# sed -i 's/renderer: networkd/renderer: NetworkManager/' //etc/netplan/01-netcfg.yaml
######################################
systemctl start NetworkManager
NIC=$(nmcli device show|grep GENERAL.DEVICE|head -n1|awk '{print $2}')
##### create Netplan yaml config file
cat >/etc/netplan/01-netcfg.yaml <<EOF
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
version: 2
renderer: NetworkManager
ethernets:
EOF
echo " ${NIC}:" >> /etc/netplan/01-netcfg.yaml
cat >>/etc/netplan/01-netcfg.yaml <<EOF
dhcp4: yes
nameservers:
search: [abc.domain.edu, def.domain.edu]
addresses: [10.10.11.22, 10.10.11.23]
EOF
#work around DNS resolv bug
systemctl stop systemd-resolved
sed -i 's/#DNS=/DNS=10.10.11.22 10.10.11.23/' /etc/systemd/resolved.conf
sed -i 's/#Domains=/Domains=abc.domain.edu def.domain.edu' /etc/systemd/resolved.conf
systemctl start systemd-resolved
systemctl restart NetworkManager
netplan apply
reboot
############### End Netplan Config
I put together a script that works around the issue of Netplan not currently supporting the ability to supersede DHCP supplied DNS servers and domain search order. It creates the Netplan yaml file and configures systemd-resolved to work as expected.
################## Start Netplan config (renderer: NetworkManager)
# Some useful commands for customisation
# NetConn=$(nmcli device show|grep GENERAL.CONNECTION|head -n1|awk '{print $2}')
# IP=$(nmcli device show|grep IP4.ADDRESS|head -n1|awk '{print $2}')
# GATEWAY=$(nmcli device show|grep IP4.GATEWAY|head -n1|awk '{print $2}')
# sed -i 's/renderer: networkd/renderer: NetworkManager/' //etc/netplan/01-netcfg.yaml
######################################
systemctl start NetworkManager
NIC=$(nmcli device show|grep GENERAL.DEVICE|head -n1|awk '{print $2}')
##### create Netplan yaml config file
cat >/etc/netplan/01-netcfg.yaml <<EOF
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
version: 2
renderer: NetworkManager
ethernets:
EOF
echo " ${NIC}:" >> /etc/netplan/01-netcfg.yaml
cat >>/etc/netplan/01-netcfg.yaml <<EOF
dhcp4: yes
nameservers:
search: [abc.domain.edu, def.domain.edu]
addresses: [10.10.11.22, 10.10.11.23]
EOF
#work around DNS resolv bug
systemctl stop systemd-resolved
sed -i 's/#DNS=/DNS=10.10.11.22 10.10.11.23/' /etc/systemd/resolved.conf
sed -i 's/#Domains=/Domains=abc.domain.edu def.domain.edu' /etc/systemd/resolved.conf
systemctl start systemd-resolved
systemctl restart NetworkManager
netplan apply
reboot
############### End Netplan Config
edited May 9 '18 at 18:26
Fabby
27k1360161
27k1360161
answered May 9 '18 at 17:19
WildstalkerWildstalker
314
314
add a comment |
add a comment |
The solution that worked for me is posted here on my blog
Use nano editor to edit these 2 files
nano /etc/resolv.conf
nano /etc/resolvconf/resolv.conf.d/head
Add DNS servers you want to use
nameserver 9.9.9.9
nameserver 127.0.0.1
Then restart the service
service systemd-resolved restart
Final check:
cat /etc/resolv.conf
Do nslookup
nslookup google.com
i just used this and it fixed the problem on my laptop at home, but some time in the future when I am out of my home network I can see that it will cause problems, because the primary and secondary dns server will still be my home servers with their lan addresses.
2
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
it's not elegant, but it work's gcloud sometimes sabotage my bedtime.
– Rodrigo Ferrari
Jun 2 '18 at 4:39
Editing/etc/resolv.conf
doesn't work as the file will be overwritten during thesystemd-resolved
restart. Just edit/etc/systemd/resolved.conf
. See my answer here: askubuntu.com/questions/977243/ubuntu-17-10-disable-netplan/…
– EnzoR
Oct 2 '18 at 16:01
add a comment |
The solution that worked for me is posted here on my blog
Use nano editor to edit these 2 files
nano /etc/resolv.conf
nano /etc/resolvconf/resolv.conf.d/head
Add DNS servers you want to use
nameserver 9.9.9.9
nameserver 127.0.0.1
Then restart the service
service systemd-resolved restart
Final check:
cat /etc/resolv.conf
Do nslookup
nslookup google.com
i just used this and it fixed the problem on my laptop at home, but some time in the future when I am out of my home network I can see that it will cause problems, because the primary and secondary dns server will still be my home servers with their lan addresses.
2
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
it's not elegant, but it work's gcloud sometimes sabotage my bedtime.
– Rodrigo Ferrari
Jun 2 '18 at 4:39
Editing/etc/resolv.conf
doesn't work as the file will be overwritten during thesystemd-resolved
restart. Just edit/etc/systemd/resolved.conf
. See my answer here: askubuntu.com/questions/977243/ubuntu-17-10-disable-netplan/…
– EnzoR
Oct 2 '18 at 16:01
add a comment |
The solution that worked for me is posted here on my blog
Use nano editor to edit these 2 files
nano /etc/resolv.conf
nano /etc/resolvconf/resolv.conf.d/head
Add DNS servers you want to use
nameserver 9.9.9.9
nameserver 127.0.0.1
Then restart the service
service systemd-resolved restart
Final check:
cat /etc/resolv.conf
Do nslookup
nslookup google.com
i just used this and it fixed the problem on my laptop at home, but some time in the future when I am out of my home network I can see that it will cause problems, because the primary and secondary dns server will still be my home servers with their lan addresses.
The solution that worked for me is posted here on my blog
Use nano editor to edit these 2 files
nano /etc/resolv.conf
nano /etc/resolvconf/resolv.conf.d/head
Add DNS servers you want to use
nameserver 9.9.9.9
nameserver 127.0.0.1
Then restart the service
service systemd-resolved restart
Final check:
cat /etc/resolv.conf
Do nslookup
nslookup google.com
i just used this and it fixed the problem on my laptop at home, but some time in the future when I am out of my home network I can see that it will cause problems, because the primary and secondary dns server will still be my home servers with their lan addresses.
edited Aug 27 '18 at 19:10
honolulu lulu
82
82
answered Dec 7 '17 at 15:07
ookangzhengookangzheng
213
213
2
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
it's not elegant, but it work's gcloud sometimes sabotage my bedtime.
– Rodrigo Ferrari
Jun 2 '18 at 4:39
Editing/etc/resolv.conf
doesn't work as the file will be overwritten during thesystemd-resolved
restart. Just edit/etc/systemd/resolved.conf
. See my answer here: askubuntu.com/questions/977243/ubuntu-17-10-disable-netplan/…
– EnzoR
Oct 2 '18 at 16:01
add a comment |
2
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
it's not elegant, but it work's gcloud sometimes sabotage my bedtime.
– Rodrigo Ferrari
Jun 2 '18 at 4:39
Editing/etc/resolv.conf
doesn't work as the file will be overwritten during thesystemd-resolved
restart. Just edit/etc/systemd/resolved.conf
. See my answer here: askubuntu.com/questions/977243/ubuntu-17-10-disable-netplan/…
– EnzoR
Oct 2 '18 at 16:01
2
2
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
You would need to reconfigure every time the DNS IP's changes (for instance on different networks).
– Victor
Feb 14 '18 at 23:39
it's not elegant, but it work's gcloud sometimes sabotage my bedtime.
– Rodrigo Ferrari
Jun 2 '18 at 4:39
it's not elegant, but it work's gcloud sometimes sabotage my bedtime.
– Rodrigo Ferrari
Jun 2 '18 at 4:39
Editing
/etc/resolv.conf
doesn't work as the file will be overwritten during the systemd-resolved
restart. Just edit /etc/systemd/resolved.conf
. See my answer here: askubuntu.com/questions/977243/ubuntu-17-10-disable-netplan/…– EnzoR
Oct 2 '18 at 16:01
Editing
/etc/resolv.conf
doesn't work as the file will be overwritten during the systemd-resolved
restart. Just edit /etc/systemd/resolved.conf
. See my answer here: askubuntu.com/questions/977243/ubuntu-17-10-disable-netplan/…– EnzoR
Oct 2 '18 at 16:01
add a comment |
Your /etc/resolv.conf
is not the problem. systemd-resolved
just defaults to unconfigured, so it fails all lookups. Feel free to rant about Unconfigured vs A Reasonable Default.
Manually add nameservers to systemd-resolved
.
(editing per Olorin's comment below to add mkdir
, correct path /etc
not /lib
, in order to survive system updates)
sudo mkdir -p /etc/systemd/resolved.conf.d
sudo nano /etc/systemd/resolved.conf.d/00-my-dns-server-is.conf
Add:
[Resolved]
Cache=yes
DNS=192.168.1.152
Then...
sudo systemctl daemon-reload
systemd-resolved
is smart, but, unconfigured as it is, by package maintainers, it just LOOKS stupid because package maintainers do not believe in A Reasonable Default. We can put 13 internet root servers in there aka "djb way", or 10 opennic servers: https://pastebin.com/JBfYVVtG or the three fastest opennic servers, as measured by namebench. Plus ISP nameservers, sure. Plus Google, sure. systemd-resolved
is not the problem. I am the problem.
Though you probably don't want to edit a file/usr/lib
- those will likely be overwritten on package upgrade. I think a corresponding file somewhere in/etc/systemd
is the way to go (it already should have an/etc/systemd/resolved.conf
ready to be edited by admins).
– Olorin
Jan 23 at 4:16
1
man resolved.conf.d, with the d, yes /etc/systemd/resolved.d is the place. I'm noticing that we often have to mkdir /etc/[path].d. bob@laptop l /etc/systemd/resolved.conf.d ls: cannot access '/etc/systemd/resolved.conf.d': No such file or directory
– BobDodds
Jan 23 at 4:20
add a comment |
Your /etc/resolv.conf
is not the problem. systemd-resolved
just defaults to unconfigured, so it fails all lookups. Feel free to rant about Unconfigured vs A Reasonable Default.
Manually add nameservers to systemd-resolved
.
(editing per Olorin's comment below to add mkdir
, correct path /etc
not /lib
, in order to survive system updates)
sudo mkdir -p /etc/systemd/resolved.conf.d
sudo nano /etc/systemd/resolved.conf.d/00-my-dns-server-is.conf
Add:
[Resolved]
Cache=yes
DNS=192.168.1.152
Then...
sudo systemctl daemon-reload
systemd-resolved
is smart, but, unconfigured as it is, by package maintainers, it just LOOKS stupid because package maintainers do not believe in A Reasonable Default. We can put 13 internet root servers in there aka "djb way", or 10 opennic servers: https://pastebin.com/JBfYVVtG or the three fastest opennic servers, as measured by namebench. Plus ISP nameservers, sure. Plus Google, sure. systemd-resolved
is not the problem. I am the problem.
Though you probably don't want to edit a file/usr/lib
- those will likely be overwritten on package upgrade. I think a corresponding file somewhere in/etc/systemd
is the way to go (it already should have an/etc/systemd/resolved.conf
ready to be edited by admins).
– Olorin
Jan 23 at 4:16
1
man resolved.conf.d, with the d, yes /etc/systemd/resolved.d is the place. I'm noticing that we often have to mkdir /etc/[path].d. bob@laptop l /etc/systemd/resolved.conf.d ls: cannot access '/etc/systemd/resolved.conf.d': No such file or directory
– BobDodds
Jan 23 at 4:20
add a comment |
Your /etc/resolv.conf
is not the problem. systemd-resolved
just defaults to unconfigured, so it fails all lookups. Feel free to rant about Unconfigured vs A Reasonable Default.
Manually add nameservers to systemd-resolved
.
(editing per Olorin's comment below to add mkdir
, correct path /etc
not /lib
, in order to survive system updates)
sudo mkdir -p /etc/systemd/resolved.conf.d
sudo nano /etc/systemd/resolved.conf.d/00-my-dns-server-is.conf
Add:
[Resolved]
Cache=yes
DNS=192.168.1.152
Then...
sudo systemctl daemon-reload
systemd-resolved
is smart, but, unconfigured as it is, by package maintainers, it just LOOKS stupid because package maintainers do not believe in A Reasonable Default. We can put 13 internet root servers in there aka "djb way", or 10 opennic servers: https://pastebin.com/JBfYVVtG or the three fastest opennic servers, as measured by namebench. Plus ISP nameservers, sure. Plus Google, sure. systemd-resolved
is not the problem. I am the problem.
Your /etc/resolv.conf
is not the problem. systemd-resolved
just defaults to unconfigured, so it fails all lookups. Feel free to rant about Unconfigured vs A Reasonable Default.
Manually add nameservers to systemd-resolved
.
(editing per Olorin's comment below to add mkdir
, correct path /etc
not /lib
, in order to survive system updates)
sudo mkdir -p /etc/systemd/resolved.conf.d
sudo nano /etc/systemd/resolved.conf.d/00-my-dns-server-is.conf
Add:
[Resolved]
Cache=yes
DNS=192.168.1.152
Then...
sudo systemctl daemon-reload
systemd-resolved
is smart, but, unconfigured as it is, by package maintainers, it just LOOKS stupid because package maintainers do not believe in A Reasonable Default. We can put 13 internet root servers in there aka "djb way", or 10 opennic servers: https://pastebin.com/JBfYVVtG or the three fastest opennic servers, as measured by namebench. Plus ISP nameservers, sure. Plus Google, sure. systemd-resolved
is not the problem. I am the problem.
edited Jan 23 at 4:48
answered Jan 23 at 4:11
BobDoddsBobDodds
314
314
Though you probably don't want to edit a file/usr/lib
- those will likely be overwritten on package upgrade. I think a corresponding file somewhere in/etc/systemd
is the way to go (it already should have an/etc/systemd/resolved.conf
ready to be edited by admins).
– Olorin
Jan 23 at 4:16
1
man resolved.conf.d, with the d, yes /etc/systemd/resolved.d is the place. I'm noticing that we often have to mkdir /etc/[path].d. bob@laptop l /etc/systemd/resolved.conf.d ls: cannot access '/etc/systemd/resolved.conf.d': No such file or directory
– BobDodds
Jan 23 at 4:20
add a comment |
Though you probably don't want to edit a file/usr/lib
- those will likely be overwritten on package upgrade. I think a corresponding file somewhere in/etc/systemd
is the way to go (it already should have an/etc/systemd/resolved.conf
ready to be edited by admins).
– Olorin
Jan 23 at 4:16
1
man resolved.conf.d, with the d, yes /etc/systemd/resolved.d is the place. I'm noticing that we often have to mkdir /etc/[path].d. bob@laptop l /etc/systemd/resolved.conf.d ls: cannot access '/etc/systemd/resolved.conf.d': No such file or directory
– BobDodds
Jan 23 at 4:20
Though you probably don't want to edit a file
/usr/lib
- those will likely be overwritten on package upgrade. I think a corresponding file somewhere in /etc/systemd
is the way to go (it already should have an /etc/systemd/resolved.conf
ready to be edited by admins).– Olorin
Jan 23 at 4:16
Though you probably don't want to edit a file
/usr/lib
- those will likely be overwritten on package upgrade. I think a corresponding file somewhere in /etc/systemd
is the way to go (it already should have an /etc/systemd/resolved.conf
ready to be edited by admins).– Olorin
Jan 23 at 4:16
1
1
man resolved.conf.d, with the d, yes /etc/systemd/resolved.d is the place. I'm noticing that we often have to mkdir /etc/[path].d. bob@laptop l /etc/systemd/resolved.conf.d ls: cannot access '/etc/systemd/resolved.conf.d': No such file or directory
– BobDodds
Jan 23 at 4:20
man resolved.conf.d, with the d, yes /etc/systemd/resolved.d is the place. I'm noticing that we often have to mkdir /etc/[path].d. bob@laptop l /etc/systemd/resolved.conf.d ls: cannot access '/etc/systemd/resolved.conf.d': No such file or directory
– BobDodds
Jan 23 at 4:20
add a comment |
On my system I found a bad symlink: /etc/resolv.conf
was a symlink which points to /run/systemd/resolve/stub-resolv.conf
This file contains only one line:
nameserver 127.0.0.53#53
As a result, the local network's DNS lookup was often missing.
So, instead I changed /etc/reolv.conf
to point to /run/systemd/resolve/resolv.conf
and now works correctly.
add a comment |
On my system I found a bad symlink: /etc/resolv.conf
was a symlink which points to /run/systemd/resolve/stub-resolv.conf
This file contains only one line:
nameserver 127.0.0.53#53
As a result, the local network's DNS lookup was often missing.
So, instead I changed /etc/reolv.conf
to point to /run/systemd/resolve/resolv.conf
and now works correctly.
add a comment |
On my system I found a bad symlink: /etc/resolv.conf
was a symlink which points to /run/systemd/resolve/stub-resolv.conf
This file contains only one line:
nameserver 127.0.0.53#53
As a result, the local network's DNS lookup was often missing.
So, instead I changed /etc/reolv.conf
to point to /run/systemd/resolve/resolv.conf
and now works correctly.
On my system I found a bad symlink: /etc/resolv.conf
was a symlink which points to /run/systemd/resolve/stub-resolv.conf
This file contains only one line:
nameserver 127.0.0.53#53
As a result, the local network's DNS lookup was often missing.
So, instead I changed /etc/reolv.conf
to point to /run/systemd/resolve/resolv.conf
and now works correctly.
edited Jan 31 at 6:24
Benjamin R
1,160816
1,160816
answered Jan 30 at 18:43
Bánó GáborBánó Gábor
1
1
add a comment |
add a comment |
I have the same problem. Each reboot, nothing will resolve. I've uninstalled everything and reinstalled it about 50 times already. It's simply just broken.
so the fix is.... "just apply a few settings each time you boot your pc, which allows 90% of host names to resolve but wget and apt-get updates and upgrades will fail randomly for no reason"
cat /etc/systemd/resolved.conf
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See resolved.conf(5) for details
[Resolve]
#DNS=
#FallbackDNS=
#Domains=
#LLMNR=yes
#MulticastDNS=yes
#DNSSEC=no
#Cache=yes
#DNSStubListener=udp
When using Ubuntu 17.10 Desktop, you have to edit the one file that says DO NOT EDIT THIS FILE BLAH BLAH BLAH
well that's the ONLY way it works~!
root@nas:~# cat /etc/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 8.8.8.8
So remove the 127.0.0.53 IP as the name server and enter another one, google for example. It appears my actual DNS IP address doesn't resolve host names either (even though it works on 10 other machines and devices in the house), but google's works fine.
add a comment |
I have the same problem. Each reboot, nothing will resolve. I've uninstalled everything and reinstalled it about 50 times already. It's simply just broken.
so the fix is.... "just apply a few settings each time you boot your pc, which allows 90% of host names to resolve but wget and apt-get updates and upgrades will fail randomly for no reason"
cat /etc/systemd/resolved.conf
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See resolved.conf(5) for details
[Resolve]
#DNS=
#FallbackDNS=
#Domains=
#LLMNR=yes
#MulticastDNS=yes
#DNSSEC=no
#Cache=yes
#DNSStubListener=udp
When using Ubuntu 17.10 Desktop, you have to edit the one file that says DO NOT EDIT THIS FILE BLAH BLAH BLAH
well that's the ONLY way it works~!
root@nas:~# cat /etc/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 8.8.8.8
So remove the 127.0.0.53 IP as the name server and enter another one, google for example. It appears my actual DNS IP address doesn't resolve host names either (even though it works on 10 other machines and devices in the house), but google's works fine.
add a comment |
I have the same problem. Each reboot, nothing will resolve. I've uninstalled everything and reinstalled it about 50 times already. It's simply just broken.
so the fix is.... "just apply a few settings each time you boot your pc, which allows 90% of host names to resolve but wget and apt-get updates and upgrades will fail randomly for no reason"
cat /etc/systemd/resolved.conf
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See resolved.conf(5) for details
[Resolve]
#DNS=
#FallbackDNS=
#Domains=
#LLMNR=yes
#MulticastDNS=yes
#DNSSEC=no
#Cache=yes
#DNSStubListener=udp
When using Ubuntu 17.10 Desktop, you have to edit the one file that says DO NOT EDIT THIS FILE BLAH BLAH BLAH
well that's the ONLY way it works~!
root@nas:~# cat /etc/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 8.8.8.8
So remove the 127.0.0.53 IP as the name server and enter another one, google for example. It appears my actual DNS IP address doesn't resolve host names either (even though it works on 10 other machines and devices in the house), but google's works fine.
I have the same problem. Each reboot, nothing will resolve. I've uninstalled everything and reinstalled it about 50 times already. It's simply just broken.
so the fix is.... "just apply a few settings each time you boot your pc, which allows 90% of host names to resolve but wget and apt-get updates and upgrades will fail randomly for no reason"
cat /etc/systemd/resolved.conf
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See resolved.conf(5) for details
[Resolve]
#DNS=
#FallbackDNS=
#Domains=
#LLMNR=yes
#MulticastDNS=yes
#DNSSEC=no
#Cache=yes
#DNSStubListener=udp
When using Ubuntu 17.10 Desktop, you have to edit the one file that says DO NOT EDIT THIS FILE BLAH BLAH BLAH
well that's the ONLY way it works~!
root@nas:~# cat /etc/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.
nameserver 8.8.8.8
So remove the 127.0.0.53 IP as the name server and enter another one, google for example. It appears my actual DNS IP address doesn't resolve host names either (even though it works on 10 other machines and devices in the house), but google's works fine.
edited Dec 29 '17 at 8:30
ravery
5,49351132
5,49351132
answered Dec 29 '17 at 6:42
user776499
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f973017%2fwrong-nameserver-set-by-resolvconf-and-networkmanager%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown