How to monitor Ryzen Temperatures on Ubuntu 18.04?
i found this post
https://linuxconfig.org/monitor-amd-ryzen-temperatures-in-linux-with-latest-kernel-modules
however the git repository they are using doesn't exist any more so i cannot try it.
hardware:
@SERVER:~$ sudo sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# Board: ASUSTeK COMPUTER INC. ROG STRIX X370-F GAMING
# Kernel: 4.15.0-38-generic x86_64
# Processor: AMD Ryzen 7 1800X Eight-Core Processor (23/1/1)
......
Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
monitor temperature monitoring
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
add a comment |
i found this post
https://linuxconfig.org/monitor-amd-ryzen-temperatures-in-linux-with-latest-kernel-modules
however the git repository they are using doesn't exist any more so i cannot try it.
hardware:
@SERVER:~$ sudo sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# Board: ASUSTeK COMPUTER INC. ROG STRIX X370-F GAMING
# Kernel: 4.15.0-38-generic x86_64
# Processor: AMD Ryzen 7 1800X Eight-Core Processor (23/1/1)
......
Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
monitor temperature monitoring
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
add a comment |
i found this post
https://linuxconfig.org/monitor-amd-ryzen-temperatures-in-linux-with-latest-kernel-modules
however the git repository they are using doesn't exist any more so i cannot try it.
hardware:
@SERVER:~$ sudo sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# Board: ASUSTeK COMPUTER INC. ROG STRIX X370-F GAMING
# Kernel: 4.15.0-38-generic x86_64
# Processor: AMD Ryzen 7 1800X Eight-Core Processor (23/1/1)
......
Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
monitor temperature monitoring
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
i found this post
https://linuxconfig.org/monitor-amd-ryzen-temperatures-in-linux-with-latest-kernel-modules
however the git repository they are using doesn't exist any more so i cannot try it.
hardware:
@SERVER:~$ sudo sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# Board: ASUSTeK COMPUTER INC. ROG STRIX X370-F GAMING
# Kernel: 4.15.0-38-generic x86_64
# Processor: AMD Ryzen 7 1800X Eight-Core Processor (23/1/1)
......
Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
monitor temperature monitoring
monitor temperature monitoring
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
asked Nov 10 '18 at 12:40
genx1mx6genx1mx6
63
63
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
As of Linux kernel version 3.15 (which is a default in Ubuntu 18.04.1), both it87 and nct6775 modules are included in the release. You don't have to compile them yourself.
Here is what it87 is capable right now – in this example on AMD Ryzen 5 2600:
$ sensors
it8792-isa-0a60
Adapter: ISA adapter
in0: +0.80 V (min = +0.00 V, max = +2.78 V)
in1: +1.02 V (min = +0.00 V, max = +2.78 V)
in2: +1.08 V (min = +0.00 V, max = +2.78 V)
+3.3V: +1.67 V (min = +0.00 V, max = +2.78 V)
in4: +1.30 V (min = +0.00 V, max = +2.78 V)
in5: +1.17 V (min = +0.00 V, max = +2.78 V)
in6: +2.78 V (min = +0.00 V, max = +2.78 V) ALARM
3VSB: +1.67 V (min = +0.00 V, max = +2.78 V)
Vbat: +1.60 V
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
temp3: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
intrusion0: ALARM
If you need per core temperatures and/or better support for AMD Zen 2 CPUs, they will be available in 4.21 kernel release – hopefully by the end of Q1'2019. More info on Phoronix.
UPDATE: 4.21 just became 5.0 with the 5.0-rc1 release
answered Jan 6 at 13:54
TPhasterTPhaster
114
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1091671%2fhow-to-monitor-ryzen-temperatures-on-ubuntu-18-04%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
As of Linux kernel version 3.15 (which is a default in Ubuntu 18.04.1), both it87 and nct6775 modules are included in the release. You don't have to compile them yourself.
Here is what it87 is capable right now – in this example on AMD Ryzen 5 2600:
$ sensors
it8792-isa-0a60
Adapter: ISA adapter
in0: +0.80 V (min = +0.00 V, max = +2.78 V)
in1: +1.02 V (min = +0.00 V, max = +2.78 V)
in2: +1.08 V (min = +0.00 V, max = +2.78 V)
+3.3V: +1.67 V (min = +0.00 V, max = +2.78 V)
in4: +1.30 V (min = +0.00 V, max = +2.78 V)
in5: +1.17 V (min = +0.00 V, max = +2.78 V)
in6: +2.78 V (min = +0.00 V, max = +2.78 V) ALARM
3VSB: +1.67 V (min = +0.00 V, max = +2.78 V)
Vbat: +1.60 V
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
temp3: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
intrusion0: ALARM
If you need per core temperatures and/or better support for AMD Zen 2 CPUs, they will be available in 4.21 kernel release – hopefully by the end of Q1'2019. More info on Phoronix.
UPDATE: 4.21 just became 5.0 with the 5.0-rc1 release
answered Jan 6 at 13:54
TPhasterTPhaster
114
add a comment |
As of Linux kernel version 3.15 (which is a default in Ubuntu 18.04.1), both it87 and nct6775 modules are included in the release. You don't have to compile them yourself.
Here is what it87 is capable right now – in this example on AMD Ryzen 5 2600:
$ sensors
it8792-isa-0a60
Adapter: ISA adapter
in0: +0.80 V (min = +0.00 V, max = +2.78 V)
in1: +1.02 V (min = +0.00 V, max = +2.78 V)
in2: +1.08 V (min = +0.00 V, max = +2.78 V)
+3.3V: +1.67 V (min = +0.00 V, max = +2.78 V)
in4: +1.30 V (min = +0.00 V, max = +2.78 V)
in5: +1.17 V (min = +0.00 V, max = +2.78 V)
in6: +2.78 V (min = +0.00 V, max = +2.78 V) ALARM
3VSB: +1.67 V (min = +0.00 V, max = +2.78 V)
Vbat: +1.60 V
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
temp3: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
intrusion0: ALARM
If you need per core temperatures and/or better support for AMD Zen 2 CPUs, they will be available in 4.21 kernel release – hopefully by the end of Q1'2019. More info on Phoronix.
UPDATE: 4.21 just became 5.0 with the 5.0-rc1 release
answered Jan 6 at 13:54
TPhasterTPhaster
114
add a comment |
As of Linux kernel version 3.15 (which is a default in Ubuntu 18.04.1), both it87 and nct6775 modules are included in the release. You don't have to compile them yourself.
Here is what it87 is capable right now – in this example on AMD Ryzen 5 2600:
$ sensors
it8792-isa-0a60
Adapter: ISA adapter
in0: +0.80 V (min = +0.00 V, max = +2.78 V)
in1: +1.02 V (min = +0.00 V, max = +2.78 V)
in2: +1.08 V (min = +0.00 V, max = +2.78 V)
+3.3V: +1.67 V (min = +0.00 V, max = +2.78 V)
in4: +1.30 V (min = +0.00 V, max = +2.78 V)
in5: +1.17 V (min = +0.00 V, max = +2.78 V)
in6: +2.78 V (min = +0.00 V, max = +2.78 V) ALARM
3VSB: +1.67 V (min = +0.00 V, max = +2.78 V)
Vbat: +1.60 V
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
temp3: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
intrusion0: ALARM
If you need per core temperatures and/or better support for AMD Zen 2 CPUs, they will be available in 4.21 kernel release – hopefully by the end of Q1'2019. More info on Phoronix.
UPDATE: 4.21 just became 5.0 with the 5.0-rc1 release
answered Jan 6 at 13:54
TPhasterTPhaster
114
As of Linux kernel version 3.15 (which is a default in Ubuntu 18.04.1), both it87 and nct6775 modules are included in the release. You don't have to compile them yourself.
Here is what it87 is capable right now – in this example on AMD Ryzen 5 2600:
$ sensors
it8792-isa-0a60
Adapter: ISA adapter
in0: +0.80 V (min = +0.00 V, max = +2.78 V)
in1: +1.02 V (min = +0.00 V, max = +2.78 V)
in2: +1.08 V (min = +0.00 V, max = +2.78 V)
+3.3V: +1.67 V (min = +0.00 V, max = +2.78 V)
in4: +1.30 V (min = +0.00 V, max = +2.78 V)
in5: +1.17 V (min = +0.00 V, max = +2.78 V)
in6: +2.78 V (min = +0.00 V, max = +2.78 V) ALARM
3VSB: +1.67 V (min = +0.00 V, max = +2.78 V)
Vbat: +1.60 V
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
temp3: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
intrusion0: ALARM
If you need per core temperatures and/or better support for AMD Zen 2 CPUs, they will be available in 4.21 kernel release – hopefully by the end of Q1'2019. More info on Phoronix.
UPDATE: 4.21 just became 5.0 with the 5.0-rc1 release
answered Jan 6 at 13:54
TPhasterTPhaster
114
edited Jan 8 at 0:26
answered Jan 6 at 13:54
TPhasterTPhaster
114
answered Jan 6 at 13:54
TPhasterTPhaster
114
answered Jan 6 at 13:54
TPhasterTPhaster
114
114
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1091671%2fhow-to-monitor-ryzen-temperatures-on-ubuntu-18-04%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
