How to set up SNMP in Ubuntu server 18.04 to report access point activity to Zabbix dashboard?
I really need assistance in setting up SNMP to work with Zabbix on my dashboard.
I have set up an Ubuntu 18.04 Zabbix server and have added over 18 agents. All virtual machines with Zabbix agents and they are working great!
Now I have gotten to the point where I need to have the AP's set up for Zabbix.
I have followed the instructions and did the following so far:
sudo apt-get update
sudo apt-get install snmp snmp-mibs-downloader
sudo apt-get update
sudo apt-get install snmpd
I opened sudo nano /etc/snmp/snmp.conf
and commented the following line:
#mibs :
Then I went into the configuration file:
sudo nano /etc/snmp/snmpd.conf
And from there I made changes to the following lines:
Listen for connections from the local system only
agentAddress udp:127.0.0.1:161 <--- commented this part.
Listen for connections on all interfaces (both IPv4 and IPv6)
agentAddress udp:161,udp6:[::1]:161 <--remove the comment from this line to make it work.
Then I set up the Zabbix dashboard side. I will attach pictures of the set-up.
1st zabbix dashboard menu:
2nd dashboard set-up menu:
I get the following error:
I will also attach picture that shows my meraki access point set-up.
Meraki AP SNMP set-up:
Lastly, I will add a picture that shows the Linux Zabbix server terminal set up on that config file.
Linux Zabbix Server:
I am stumped and cannot figure out why Zabbix still throwing out that error.
I have gone thru the Zabbix documentation but cannot find a solution to my problem.
networking server 18.04 snmp zabbix
add a comment |
I really need assistance in setting up SNMP to work with Zabbix on my dashboard.
I have set up an Ubuntu 18.04 Zabbix server and have added over 18 agents. All virtual machines with Zabbix agents and they are working great!
Now I have gotten to the point where I need to have the AP's set up for Zabbix.
I have followed the instructions and did the following so far:
sudo apt-get update
sudo apt-get install snmp snmp-mibs-downloader
sudo apt-get update
sudo apt-get install snmpd
I opened sudo nano /etc/snmp/snmp.conf
and commented the following line:
#mibs :
Then I went into the configuration file:
sudo nano /etc/snmp/snmpd.conf
And from there I made changes to the following lines:
Listen for connections from the local system only
agentAddress udp:127.0.0.1:161 <--- commented this part.
Listen for connections on all interfaces (both IPv4 and IPv6)
agentAddress udp:161,udp6:[::1]:161 <--remove the comment from this line to make it work.
Then I set up the Zabbix dashboard side. I will attach pictures of the set-up.
1st zabbix dashboard menu:
2nd dashboard set-up menu:
I get the following error:
I will also attach picture that shows my meraki access point set-up.
Meraki AP SNMP set-up:
Lastly, I will add a picture that shows the Linux Zabbix server terminal set up on that config file.
Linux Zabbix Server:
I am stumped and cannot figure out why Zabbix still throwing out that error.
I have gone thru the Zabbix documentation but cannot find a solution to my problem.
networking server 18.04 snmp zabbix
a) It looks like you are trying to poll SNMP devices - this means that there is no need to configure snmpd on the Zabbix server. b) You said you "followed the instructions" - which instructions? c) Please include the error message as text in your question. d) Try to poll the device withsnmpget
from the Zabbix server - if that does not work, no point in trying with Zabbix.
– Richlv
Jan 1 at 19:41
@Richlv I appreciate the response, anyways you can give me an example on how to use the snmpget? I am still a noob at linux and trying to figure this all out.
– BrawlerBear5
Jan 2 at 14:05
add a comment |
I really need assistance in setting up SNMP to work with Zabbix on my dashboard.
I have set up an Ubuntu 18.04 Zabbix server and have added over 18 agents. All virtual machines with Zabbix agents and they are working great!
Now I have gotten to the point where I need to have the AP's set up for Zabbix.
I have followed the instructions and did the following so far:
sudo apt-get update
sudo apt-get install snmp snmp-mibs-downloader
sudo apt-get update
sudo apt-get install snmpd
I opened sudo nano /etc/snmp/snmp.conf
and commented the following line:
#mibs :
Then I went into the configuration file:
sudo nano /etc/snmp/snmpd.conf
And from there I made changes to the following lines:
Listen for connections from the local system only
agentAddress udp:127.0.0.1:161 <--- commented this part.
Listen for connections on all interfaces (both IPv4 and IPv6)
agentAddress udp:161,udp6:[::1]:161 <--remove the comment from this line to make it work.
Then I set up the Zabbix dashboard side. I will attach pictures of the set-up.
1st zabbix dashboard menu:
2nd dashboard set-up menu:
I get the following error:
I will also attach picture that shows my meraki access point set-up.
Meraki AP SNMP set-up:
Lastly, I will add a picture that shows the Linux Zabbix server terminal set up on that config file.
Linux Zabbix Server:
I am stumped and cannot figure out why Zabbix still throwing out that error.
I have gone thru the Zabbix documentation but cannot find a solution to my problem.
networking server 18.04 snmp zabbix
I really need assistance in setting up SNMP to work with Zabbix on my dashboard.
I have set up an Ubuntu 18.04 Zabbix server and have added over 18 agents. All virtual machines with Zabbix agents and they are working great!
Now I have gotten to the point where I need to have the AP's set up for Zabbix.
I have followed the instructions and did the following so far:
sudo apt-get update
sudo apt-get install snmp snmp-mibs-downloader
sudo apt-get update
sudo apt-get install snmpd
I opened sudo nano /etc/snmp/snmp.conf
and commented the following line:
#mibs :
Then I went into the configuration file:
sudo nano /etc/snmp/snmpd.conf
And from there I made changes to the following lines:
Listen for connections from the local system only
agentAddress udp:127.0.0.1:161 <--- commented this part.
Listen for connections on all interfaces (both IPv4 and IPv6)
agentAddress udp:161,udp6:[::1]:161 <--remove the comment from this line to make it work.
Then I set up the Zabbix dashboard side. I will attach pictures of the set-up.
1st zabbix dashboard menu:
2nd dashboard set-up menu:
I get the following error:
I will also attach picture that shows my meraki access point set-up.
Meraki AP SNMP set-up:
Lastly, I will add a picture that shows the Linux Zabbix server terminal set up on that config file.
Linux Zabbix Server:
I am stumped and cannot figure out why Zabbix still throwing out that error.
I have gone thru the Zabbix documentation but cannot find a solution to my problem.
networking server 18.04 snmp zabbix
networking server 18.04 snmp zabbix
edited Jan 2 at 0:08
Kevin Bowen
14.4k155970
14.4k155970
asked Dec 28 '18 at 13:22
BrawlerBear5BrawlerBear5
62
62
a) It looks like you are trying to poll SNMP devices - this means that there is no need to configure snmpd on the Zabbix server. b) You said you "followed the instructions" - which instructions? c) Please include the error message as text in your question. d) Try to poll the device withsnmpget
from the Zabbix server - if that does not work, no point in trying with Zabbix.
– Richlv
Jan 1 at 19:41
@Richlv I appreciate the response, anyways you can give me an example on how to use the snmpget? I am still a noob at linux and trying to figure this all out.
– BrawlerBear5
Jan 2 at 14:05
add a comment |
a) It looks like you are trying to poll SNMP devices - this means that there is no need to configure snmpd on the Zabbix server. b) You said you "followed the instructions" - which instructions? c) Please include the error message as text in your question. d) Try to poll the device withsnmpget
from the Zabbix server - if that does not work, no point in trying with Zabbix.
– Richlv
Jan 1 at 19:41
@Richlv I appreciate the response, anyways you can give me an example on how to use the snmpget? I am still a noob at linux and trying to figure this all out.
– BrawlerBear5
Jan 2 at 14:05
a) It looks like you are trying to poll SNMP devices - this means that there is no need to configure snmpd on the Zabbix server. b) You said you "followed the instructions" - which instructions? c) Please include the error message as text in your question. d) Try to poll the device with
snmpget
from the Zabbix server - if that does not work, no point in trying with Zabbix.– Richlv
Jan 1 at 19:41
a) It looks like you are trying to poll SNMP devices - this means that there is no need to configure snmpd on the Zabbix server. b) You said you "followed the instructions" - which instructions? c) Please include the error message as text in your question. d) Try to poll the device with
snmpget
from the Zabbix server - if that does not work, no point in trying with Zabbix.– Richlv
Jan 1 at 19:41
@Richlv I appreciate the response, anyways you can give me an example on how to use the snmpget? I am still a noob at linux and trying to figure this all out.
– BrawlerBear5
Jan 2 at 14:05
@Richlv I appreciate the response, anyways you can give me an example on how to use the snmpget? I am still a noob at linux and trying to figure this all out.
– BrawlerBear5
Jan 2 at 14:05
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1105114%2fhow-to-set-up-snmp-in-ubuntu-server-18-04-to-report-access-point-activity-to-zab%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1105114%2fhow-to-set-up-snmp-in-ubuntu-server-18-04-to-report-access-point-activity-to-zab%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
a) It looks like you are trying to poll SNMP devices - this means that there is no need to configure snmpd on the Zabbix server. b) You said you "followed the instructions" - which instructions? c) Please include the error message as text in your question. d) Try to poll the device with
snmpget
from the Zabbix server - if that does not work, no point in trying with Zabbix.– Richlv
Jan 1 at 19:41
@Richlv I appreciate the response, anyways you can give me an example on how to use the snmpget? I am still a noob at linux and trying to figure this all out.
– BrawlerBear5
Jan 2 at 14:05