fsck error on boot: /dev/sda6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY












187















I dual boot Ubuntu and Windows 7.

I was browsing on FireFox in Ubuntu and all of a sudden I get some error message, so I rebooted.



Now when I try to boot into Ubuntu I get this message:



fsck from util-linux 2.26.2
/dev/sda6 contains a file system with errors, check forced.
/dev/sda6: Inodes that were part of a corrupted orphan linked list found.

/dev/sda6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda6 requires a manual fsck

Busybox v1.22.1 (Ubuntu 1:1.22.0-15ubuntu1) built in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) _


How can I fix this?










share|improve this question




















  • 1





    Have you been able to find out the root cause? I experienced exactly the same issue two times within two days using Kubuntu 16.04. Is this some software problem or an indication for defective hardware?

    – Silicomancer
    Aug 14 '16 at 10:19






  • 1





    @Silicomancer, I had this, and other related issues, and it seems quite likely to be related to a failing hard drive. I know my hard drive failed some of the S.M.A.R.T diagnostics right around when this problem occurred. Sometimes a manual 'fsck /dev/sdaX' would fix it, but other times the problem wouldn't be resolved and I'd get a kernel panic on the next boot. I've got a new HD in the mail.

    – gammapoint
    Apr 14 '17 at 21:05


















187















I dual boot Ubuntu and Windows 7.

I was browsing on FireFox in Ubuntu and all of a sudden I get some error message, so I rebooted.



Now when I try to boot into Ubuntu I get this message:



fsck from util-linux 2.26.2
/dev/sda6 contains a file system with errors, check forced.
/dev/sda6: Inodes that were part of a corrupted orphan linked list found.

/dev/sda6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda6 requires a manual fsck

Busybox v1.22.1 (Ubuntu 1:1.22.0-15ubuntu1) built in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) _


How can I fix this?










share|improve this question




















  • 1





    Have you been able to find out the root cause? I experienced exactly the same issue two times within two days using Kubuntu 16.04. Is this some software problem or an indication for defective hardware?

    – Silicomancer
    Aug 14 '16 at 10:19






  • 1





    @Silicomancer, I had this, and other related issues, and it seems quite likely to be related to a failing hard drive. I know my hard drive failed some of the S.M.A.R.T diagnostics right around when this problem occurred. Sometimes a manual 'fsck /dev/sdaX' would fix it, but other times the problem wouldn't be resolved and I'd get a kernel panic on the next boot. I've got a new HD in the mail.

    – gammapoint
    Apr 14 '17 at 21:05
















187












187








187


62






I dual boot Ubuntu and Windows 7.

I was browsing on FireFox in Ubuntu and all of a sudden I get some error message, so I rebooted.



Now when I try to boot into Ubuntu I get this message:



fsck from util-linux 2.26.2
/dev/sda6 contains a file system with errors, check forced.
/dev/sda6: Inodes that were part of a corrupted orphan linked list found.

/dev/sda6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda6 requires a manual fsck

Busybox v1.22.1 (Ubuntu 1:1.22.0-15ubuntu1) built in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) _


How can I fix this?










share|improve this question
















I dual boot Ubuntu and Windows 7.

I was browsing on FireFox in Ubuntu and all of a sudden I get some error message, so I rebooted.



Now when I try to boot into Ubuntu I get this message:



fsck from util-linux 2.26.2
/dev/sda6 contains a file system with errors, check forced.
/dev/sda6: Inodes that were part of a corrupted orphan linked list found.

/dev/sda6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda6 requires a manual fsck

Busybox v1.22.1 (Ubuntu 1:1.22.0-15ubuntu1) built in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) _


How can I fix this?







boot filesystem fsck






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited May 26 '17 at 7:06









Zanna

50.9k13136241




50.9k13136241










asked Nov 12 '15 at 13:53









JordyJordy

1,036284




1,036284








  • 1





    Have you been able to find out the root cause? I experienced exactly the same issue two times within two days using Kubuntu 16.04. Is this some software problem or an indication for defective hardware?

    – Silicomancer
    Aug 14 '16 at 10:19






  • 1





    @Silicomancer, I had this, and other related issues, and it seems quite likely to be related to a failing hard drive. I know my hard drive failed some of the S.M.A.R.T diagnostics right around when this problem occurred. Sometimes a manual 'fsck /dev/sdaX' would fix it, but other times the problem wouldn't be resolved and I'd get a kernel panic on the next boot. I've got a new HD in the mail.

    – gammapoint
    Apr 14 '17 at 21:05
















  • 1





    Have you been able to find out the root cause? I experienced exactly the same issue two times within two days using Kubuntu 16.04. Is this some software problem or an indication for defective hardware?

    – Silicomancer
    Aug 14 '16 at 10:19






  • 1





    @Silicomancer, I had this, and other related issues, and it seems quite likely to be related to a failing hard drive. I know my hard drive failed some of the S.M.A.R.T diagnostics right around when this problem occurred. Sometimes a manual 'fsck /dev/sdaX' would fix it, but other times the problem wouldn't be resolved and I'd get a kernel panic on the next boot. I've got a new HD in the mail.

    – gammapoint
    Apr 14 '17 at 21:05










1




1





Have you been able to find out the root cause? I experienced exactly the same issue two times within two days using Kubuntu 16.04. Is this some software problem or an indication for defective hardware?

– Silicomancer
Aug 14 '16 at 10:19





Have you been able to find out the root cause? I experienced exactly the same issue two times within two days using Kubuntu 16.04. Is this some software problem or an indication for defective hardware?

– Silicomancer
Aug 14 '16 at 10:19




1




1





@Silicomancer, I had this, and other related issues, and it seems quite likely to be related to a failing hard drive. I know my hard drive failed some of the S.M.A.R.T diagnostics right around when this problem occurred. Sometimes a manual 'fsck /dev/sdaX' would fix it, but other times the problem wouldn't be resolved and I'd get a kernel panic on the next boot. I've got a new HD in the mail.

– gammapoint
Apr 14 '17 at 21:05







@Silicomancer, I had this, and other related issues, and it seems quite likely to be related to a failing hard drive. I know my hard drive failed some of the S.M.A.R.T diagnostics right around when this problem occurred. Sometimes a manual 'fsck /dev/sdaX' would fix it, but other times the problem wouldn't be resolved and I'd get a kernel panic on the next boot. I've got a new HD in the mail.

– gammapoint
Apr 14 '17 at 21:05












3 Answers
3






active

oldest

votes


















248














Try this:



fsck /dev/sda6


(where /dev/sda6 is the partition mentioned)



And enter Yes (y) to for each error. Or press a one time for always-yes.



Then reboot and it should be fine.






share|improve this answer





















  • 7





    Ok, so run fsck -a /dev/sda6 and enter Yes to all errors.

    – Nikolay Nikolov
    Nov 12 '15 at 14:13






  • 3





    Reboot linux, and if all looks good from the booting, then you should go to the apt-get again. If puts you again to busybox terminal, run fsck -a /dev/sda6 and repair the errors.

    – Nikolay Nikolov
    Nov 12 '15 at 14:21






  • 10





    do not forget to add -y at the end, or else glue your finger pressed to y

    – aditya
    May 21 '17 at 12:00






  • 3





    @aditya: You could also press 'a' for always instead of 'y' without using -y

    – Arigion
    Aug 12 '17 at 10:17






  • 2





    @Rishabh Agrahari, I think maybe the disk. You should test it with smartd tools.

    – Nikolay Nikolov
    Sep 11 '18 at 6:31



















55














I have noticed that even if you do a fsck on the disk the problem may occur again in a few days.



I have found that the problem is worse on SSD disks than the regular HDD disks. I have found some steps that may fix the problem temporarily.



fsck -fy /dev/sda1 


if sda1 is the right partition - the prompt will tell you exactly which one requires fsck.



After that if the systems boots up you may have another problem with the package management system, so if you open a terminal and type sudo apt-get update you may get an error. Do not worry. Run these commands:



sudo apt-get update
sudo apt-get clean
sudo apt-get update
sudo apt-get upgrade


My opinion is that there is serious problem in Ubuntu with regard to SSD disks. The community should fix it.



I have found a possible cause of this problem: Probably the system did not shutdown normally.






share|improve this answer


























  • After the fsck command type he command exit to force the system to boot again in runlevel 5 or just reboot with init 6.! Your choice.!

    – farmuel Angel
    Sep 8 '16 at 9:47






  • 4





    Please edit your own posts if you want to add or clarify something.

    – David Foerster
    Sep 8 '16 at 10:28











  • I was facing such problem for at least ~10 times for now and actually now I recall that before that I was always installing something. But not every installation followed by such problem.

    – Slav
    Aug 7 '17 at 16:33











  • That's what happened to me: no normal shutdown on an SSD. Worked beautifully. Thank you!

    – linhares
    Oct 18 '17 at 20:33



















9














UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY means there is some file system error in the disk. Run the fsck command manually. After that it will ask some more questions - just answer y and press enter and finally reboot the server.



enter image description here






share|improve this answer
























    protected by Community Apr 13 '16 at 9:40



    Thank you for your interest in this question.
    Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).



    Would you like to answer one of these unanswered questions instead?














    3 Answers
    3






    active

    oldest

    votes








    3 Answers
    3






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    248














    Try this:



    fsck /dev/sda6


    (where /dev/sda6 is the partition mentioned)



    And enter Yes (y) to for each error. Or press a one time for always-yes.



    Then reboot and it should be fine.






    share|improve this answer





















    • 7





      Ok, so run fsck -a /dev/sda6 and enter Yes to all errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:13






    • 3





      Reboot linux, and if all looks good from the booting, then you should go to the apt-get again. If puts you again to busybox terminal, run fsck -a /dev/sda6 and repair the errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:21






    • 10





      do not forget to add -y at the end, or else glue your finger pressed to y

      – aditya
      May 21 '17 at 12:00






    • 3





      @aditya: You could also press 'a' for always instead of 'y' without using -y

      – Arigion
      Aug 12 '17 at 10:17






    • 2





      @Rishabh Agrahari, I think maybe the disk. You should test it with smartd tools.

      – Nikolay Nikolov
      Sep 11 '18 at 6:31
















    248














    Try this:



    fsck /dev/sda6


    (where /dev/sda6 is the partition mentioned)



    And enter Yes (y) to for each error. Or press a one time for always-yes.



    Then reboot and it should be fine.






    share|improve this answer





















    • 7





      Ok, so run fsck -a /dev/sda6 and enter Yes to all errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:13






    • 3





      Reboot linux, and if all looks good from the booting, then you should go to the apt-get again. If puts you again to busybox terminal, run fsck -a /dev/sda6 and repair the errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:21






    • 10





      do not forget to add -y at the end, or else glue your finger pressed to y

      – aditya
      May 21 '17 at 12:00






    • 3





      @aditya: You could also press 'a' for always instead of 'y' without using -y

      – Arigion
      Aug 12 '17 at 10:17






    • 2





      @Rishabh Agrahari, I think maybe the disk. You should test it with smartd tools.

      – Nikolay Nikolov
      Sep 11 '18 at 6:31














    248












    248








    248







    Try this:



    fsck /dev/sda6


    (where /dev/sda6 is the partition mentioned)



    And enter Yes (y) to for each error. Or press a one time for always-yes.



    Then reboot and it should be fine.






    share|improve this answer















    Try this:



    fsck /dev/sda6


    (where /dev/sda6 is the partition mentioned)



    And enter Yes (y) to for each error. Or press a one time for always-yes.



    Then reboot and it should be fine.







    share|improve this answer














    share|improve this answer



    share|improve this answer








    edited Jan 16 at 18:10









    Zanna

    50.9k13136241




    50.9k13136241










    answered Nov 12 '15 at 14:01









    Nikolay NikolovNikolay Nikolov

    2,9811613




    2,9811613








    • 7





      Ok, so run fsck -a /dev/sda6 and enter Yes to all errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:13






    • 3





      Reboot linux, and if all looks good from the booting, then you should go to the apt-get again. If puts you again to busybox terminal, run fsck -a /dev/sda6 and repair the errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:21






    • 10





      do not forget to add -y at the end, or else glue your finger pressed to y

      – aditya
      May 21 '17 at 12:00






    • 3





      @aditya: You could also press 'a' for always instead of 'y' without using -y

      – Arigion
      Aug 12 '17 at 10:17






    • 2





      @Rishabh Agrahari, I think maybe the disk. You should test it with smartd tools.

      – Nikolay Nikolov
      Sep 11 '18 at 6:31














    • 7





      Ok, so run fsck -a /dev/sda6 and enter Yes to all errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:13






    • 3





      Reboot linux, and if all looks good from the booting, then you should go to the apt-get again. If puts you again to busybox terminal, run fsck -a /dev/sda6 and repair the errors.

      – Nikolay Nikolov
      Nov 12 '15 at 14:21






    • 10





      do not forget to add -y at the end, or else glue your finger pressed to y

      – aditya
      May 21 '17 at 12:00






    • 3





      @aditya: You could also press 'a' for always instead of 'y' without using -y

      – Arigion
      Aug 12 '17 at 10:17






    • 2





      @Rishabh Agrahari, I think maybe the disk. You should test it with smartd tools.

      – Nikolay Nikolov
      Sep 11 '18 at 6:31








    7




    7





    Ok, so run fsck -a /dev/sda6 and enter Yes to all errors.

    – Nikolay Nikolov
    Nov 12 '15 at 14:13





    Ok, so run fsck -a /dev/sda6 and enter Yes to all errors.

    – Nikolay Nikolov
    Nov 12 '15 at 14:13




    3




    3





    Reboot linux, and if all looks good from the booting, then you should go to the apt-get again. If puts you again to busybox terminal, run fsck -a /dev/sda6 and repair the errors.

    – Nikolay Nikolov
    Nov 12 '15 at 14:21





    Reboot linux, and if all looks good from the booting, then you should go to the apt-get again. If puts you again to busybox terminal, run fsck -a /dev/sda6 and repair the errors.

    – Nikolay Nikolov
    Nov 12 '15 at 14:21




    10




    10





    do not forget to add -y at the end, or else glue your finger pressed to y

    – aditya
    May 21 '17 at 12:00





    do not forget to add -y at the end, or else glue your finger pressed to y

    – aditya
    May 21 '17 at 12:00




    3




    3





    @aditya: You could also press 'a' for always instead of 'y' without using -y

    – Arigion
    Aug 12 '17 at 10:17





    @aditya: You could also press 'a' for always instead of 'y' without using -y

    – Arigion
    Aug 12 '17 at 10:17




    2




    2





    @Rishabh Agrahari, I think maybe the disk. You should test it with smartd tools.

    – Nikolay Nikolov
    Sep 11 '18 at 6:31





    @Rishabh Agrahari, I think maybe the disk. You should test it with smartd tools.

    – Nikolay Nikolov
    Sep 11 '18 at 6:31













    55














    I have noticed that even if you do a fsck on the disk the problem may occur again in a few days.



    I have found that the problem is worse on SSD disks than the regular HDD disks. I have found some steps that may fix the problem temporarily.



    fsck -fy /dev/sda1 


    if sda1 is the right partition - the prompt will tell you exactly which one requires fsck.



    After that if the systems boots up you may have another problem with the package management system, so if you open a terminal and type sudo apt-get update you may get an error. Do not worry. Run these commands:



    sudo apt-get update
    sudo apt-get clean
    sudo apt-get update
    sudo apt-get upgrade


    My opinion is that there is serious problem in Ubuntu with regard to SSD disks. The community should fix it.



    I have found a possible cause of this problem: Probably the system did not shutdown normally.






    share|improve this answer


























    • After the fsck command type he command exit to force the system to boot again in runlevel 5 or just reboot with init 6.! Your choice.!

      – farmuel Angel
      Sep 8 '16 at 9:47






    • 4





      Please edit your own posts if you want to add or clarify something.

      – David Foerster
      Sep 8 '16 at 10:28











    • I was facing such problem for at least ~10 times for now and actually now I recall that before that I was always installing something. But not every installation followed by such problem.

      – Slav
      Aug 7 '17 at 16:33











    • That's what happened to me: no normal shutdown on an SSD. Worked beautifully. Thank you!

      – linhares
      Oct 18 '17 at 20:33
















    55














    I have noticed that even if you do a fsck on the disk the problem may occur again in a few days.



    I have found that the problem is worse on SSD disks than the regular HDD disks. I have found some steps that may fix the problem temporarily.



    fsck -fy /dev/sda1 


    if sda1 is the right partition - the prompt will tell you exactly which one requires fsck.



    After that if the systems boots up you may have another problem with the package management system, so if you open a terminal and type sudo apt-get update you may get an error. Do not worry. Run these commands:



    sudo apt-get update
    sudo apt-get clean
    sudo apt-get update
    sudo apt-get upgrade


    My opinion is that there is serious problem in Ubuntu with regard to SSD disks. The community should fix it.



    I have found a possible cause of this problem: Probably the system did not shutdown normally.






    share|improve this answer


























    • After the fsck command type he command exit to force the system to boot again in runlevel 5 or just reboot with init 6.! Your choice.!

      – farmuel Angel
      Sep 8 '16 at 9:47






    • 4





      Please edit your own posts if you want to add or clarify something.

      – David Foerster
      Sep 8 '16 at 10:28











    • I was facing such problem for at least ~10 times for now and actually now I recall that before that I was always installing something. But not every installation followed by such problem.

      – Slav
      Aug 7 '17 at 16:33











    • That's what happened to me: no normal shutdown on an SSD. Worked beautifully. Thank you!

      – linhares
      Oct 18 '17 at 20:33














    55












    55








    55







    I have noticed that even if you do a fsck on the disk the problem may occur again in a few days.



    I have found that the problem is worse on SSD disks than the regular HDD disks. I have found some steps that may fix the problem temporarily.



    fsck -fy /dev/sda1 


    if sda1 is the right partition - the prompt will tell you exactly which one requires fsck.



    After that if the systems boots up you may have another problem with the package management system, so if you open a terminal and type sudo apt-get update you may get an error. Do not worry. Run these commands:



    sudo apt-get update
    sudo apt-get clean
    sudo apt-get update
    sudo apt-get upgrade


    My opinion is that there is serious problem in Ubuntu with regard to SSD disks. The community should fix it.



    I have found a possible cause of this problem: Probably the system did not shutdown normally.






    share|improve this answer















    I have noticed that even if you do a fsck on the disk the problem may occur again in a few days.



    I have found that the problem is worse on SSD disks than the regular HDD disks. I have found some steps that may fix the problem temporarily.



    fsck -fy /dev/sda1 


    if sda1 is the right partition - the prompt will tell you exactly which one requires fsck.



    After that if the systems boots up you may have another problem with the package management system, so if you open a terminal and type sudo apt-get update you may get an error. Do not worry. Run these commands:



    sudo apt-get update
    sudo apt-get clean
    sudo apt-get update
    sudo apt-get upgrade


    My opinion is that there is serious problem in Ubuntu with regard to SSD disks. The community should fix it.



    I have found a possible cause of this problem: Probably the system did not shutdown normally.







    share|improve this answer














    share|improve this answer



    share|improve this answer








    edited May 26 '17 at 7:11









    Zanna

    50.9k13136241




    50.9k13136241










    answered Sep 8 '16 at 9:44









    farmuel Angelfarmuel Angel

    67144




    67144













    • After the fsck command type he command exit to force the system to boot again in runlevel 5 or just reboot with init 6.! Your choice.!

      – farmuel Angel
      Sep 8 '16 at 9:47






    • 4





      Please edit your own posts if you want to add or clarify something.

      – David Foerster
      Sep 8 '16 at 10:28











    • I was facing such problem for at least ~10 times for now and actually now I recall that before that I was always installing something. But not every installation followed by such problem.

      – Slav
      Aug 7 '17 at 16:33











    • That's what happened to me: no normal shutdown on an SSD. Worked beautifully. Thank you!

      – linhares
      Oct 18 '17 at 20:33



















    • After the fsck command type he command exit to force the system to boot again in runlevel 5 or just reboot with init 6.! Your choice.!

      – farmuel Angel
      Sep 8 '16 at 9:47






    • 4





      Please edit your own posts if you want to add or clarify something.

      – David Foerster
      Sep 8 '16 at 10:28











    • I was facing such problem for at least ~10 times for now and actually now I recall that before that I was always installing something. But not every installation followed by such problem.

      – Slav
      Aug 7 '17 at 16:33











    • That's what happened to me: no normal shutdown on an SSD. Worked beautifully. Thank you!

      – linhares
      Oct 18 '17 at 20:33

















    After the fsck command type he command exit to force the system to boot again in runlevel 5 or just reboot with init 6.! Your choice.!

    – farmuel Angel
    Sep 8 '16 at 9:47





    After the fsck command type he command exit to force the system to boot again in runlevel 5 or just reboot with init 6.! Your choice.!

    – farmuel Angel
    Sep 8 '16 at 9:47




    4




    4





    Please edit your own posts if you want to add or clarify something.

    – David Foerster
    Sep 8 '16 at 10:28





    Please edit your own posts if you want to add or clarify something.

    – David Foerster
    Sep 8 '16 at 10:28













    I was facing such problem for at least ~10 times for now and actually now I recall that before that I was always installing something. But not every installation followed by such problem.

    – Slav
    Aug 7 '17 at 16:33





    I was facing such problem for at least ~10 times for now and actually now I recall that before that I was always installing something. But not every installation followed by such problem.

    – Slav
    Aug 7 '17 at 16:33













    That's what happened to me: no normal shutdown on an SSD. Worked beautifully. Thank you!

    – linhares
    Oct 18 '17 at 20:33





    That's what happened to me: no normal shutdown on an SSD. Worked beautifully. Thank you!

    – linhares
    Oct 18 '17 at 20:33











    9














    UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY means there is some file system error in the disk. Run the fsck command manually. After that it will ask some more questions - just answer y and press enter and finally reboot the server.



    enter image description here






    share|improve this answer






























      9














      UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY means there is some file system error in the disk. Run the fsck command manually. After that it will ask some more questions - just answer y and press enter and finally reboot the server.



      enter image description here






      share|improve this answer




























        9












        9








        9







        UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY means there is some file system error in the disk. Run the fsck command manually. After that it will ask some more questions - just answer y and press enter and finally reboot the server.



        enter image description here






        share|improve this answer















        UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY means there is some file system error in the disk. Run the fsck command manually. After that it will ask some more questions - just answer y and press enter and finally reboot the server.



        enter image description here







        share|improve this answer














        share|improve this answer



        share|improve this answer








        edited Feb 4 at 18:45

























        answered Dec 8 '16 at 14:13









        GNKGNK

        9161713




        9161713

















            protected by Community Apr 13 '16 at 9:40



            Thank you for your interest in this question.
            Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).



            Would you like to answer one of these unanswered questions instead?



            Popular posts from this blog

            Biblatex bibliography style without URLs when DOI exists (in Overleaf with Zotero bibliography)

            ComboBox Display Member on multiple fields

            Is it possible to collect Nectar points via Trainline?