Filling the middle of a torus in Tikz
5
I drawed the following torus using Tikz:
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw (7.5,1.1) ellipse (1 and 1.25);
end{scope}
begin{scope}
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
I want to color the middle of it white, so it can really look like a torus. How could I do it?
tikz-pgf
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
add a comment |
5
I drawed the following torus using Tikz:
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw (7.5,1.1) ellipse (1 and 1.25);
end{scope}
begin{scope}
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
I want to color the middle of it white, so it can really look like a torus. How could I do it?
tikz-pgf
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
Have you searched this site for tori?
– Benjamin McKay
Mar 24 at 11:46
@BenjaminMcKay Yes, I did. I think I viewed every post about tori here and not a single one solves my problem.
– Gabriel Ribeiro
Mar 24 at 11:46
You can check my (new) answer of the (old) question How to draw a torus.
– Kpym
Mar 31 at 16:31
add a comment |
5
5
5
I drawed the following torus using Tikz:
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw (7.5,1.1) ellipse (1 and 1.25);
end{scope}
begin{scope}
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
I want to color the middle of it white, so it can really look like a torus. How could I do it?
tikz-pgf
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
I drawed the following torus using Tikz:
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw (7.5,1.1) ellipse (1 and 1.25);
end{scope}
begin{scope}
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
I want to color the middle of it white, so it can really look like a torus. How could I do it?
tikz-pgf
tikz-pgf
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
asked Mar 24 at 11:41
Gabriel RibeiroGabriel Ribeiro
36019
36019
Have you searched this site for tori?
– Benjamin McKay
Mar 24 at 11:46
@BenjaminMcKay Yes, I did. I think I viewed every post about tori here and not a single one solves my problem.
– Gabriel Ribeiro
Mar 24 at 11:46
You can check my (new) answer of the (old) question How to draw a torus.
– Kpym
Mar 31 at 16:31
add a comment |
Have you searched this site for tori?
– Benjamin McKay
Mar 24 at 11:46
@BenjaminMcKay Yes, I did. I think I viewed every post about tori here and not a single one solves my problem.
– Gabriel Ribeiro
Mar 24 at 11:46
You can check my (new) answer of the (old) question How to draw a torus.
– Kpym
Mar 31 at 16:31
Have you searched this site for tori?
– Benjamin McKay
Mar 24 at 11:46
Have you searched this site for tori?
– Benjamin McKay
Mar 24 at 11:46
@BenjaminMcKay Yes, I did. I think I viewed every post about tori here and not a single one solves my problem.
– Gabriel Ribeiro
Mar 24 at 11:46
@BenjaminMcKay Yes, I did. I think I viewed every post about tori here and not a single one solves my problem.
– Gabriel Ribeiro
Mar 24 at 11:46
You can check my (new) answer of the (old) question How to draw a torus.
– Kpym
Mar 31 at 16:31
You can check my (new) answer of the (old) question How to draw a torus.
– Kpym
Mar 31 at 16:31
add a comment |
2 Answers
2
active
oldest
votes
4
An answer with some really minimal changes and no additional libraries:
documentclass{article}
usepackage{tikz}
%usetikzlibrary{intersections}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw(7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
fill[white] (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
end{document}
An answer with fillbetweewn library (useful in many other cases):
documentclass{article}
usepackage{tikz}
usepackage{pgfplots}
pgfplotsset{compat=1.15}
usepgfplotslibrary{fillbetween}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
path[draw,name path= A](7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
path[draw,name path=B] (7.5,-1.1) ellipse (1 and 1.25);
fill [white,
intersection segments={
of=A and B,
sequence={A1--B1}
}];
end{scope}
end{tikzpicture}
end{document}
Both answers output:
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
add a comment |
8
With even odd rule it is a two-liner. (I would strongly advise against filling some area white because if you use this on top of any background, you will regret it.)
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
draw[fill=blue,even odd rule] (7.5,0) ellipse (1 and .75)
(7,0) arc(120:60:1 and 1.25) arc(-60:-120:1 and 1.25);
draw (7,0) arc(-120:-130:1 and 1.25) (8,0) arc(-60:-50:1 and 1.25);
end{tikzpicture}
end{document}
answered Mar 24 at 12:45
marmotmarmot
114k5145276
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f481188%2ffilling-the-middle-of-a-torus-in-tikz%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
4
An answer with some really minimal changes and no additional libraries:
documentclass{article}
usepackage{tikz}
%usetikzlibrary{intersections}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw(7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
fill[white] (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
end{document}
An answer with fillbetweewn library (useful in many other cases):
documentclass{article}
usepackage{tikz}
usepackage{pgfplots}
pgfplotsset{compat=1.15}
usepgfplotslibrary{fillbetween}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
path[draw,name path= A](7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
path[draw,name path=B] (7.5,-1.1) ellipse (1 and 1.25);
fill [white,
intersection segments={
of=A and B,
sequence={A1--B1}
}];
end{scope}
end{tikzpicture}
end{document}
Both answers output:
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
add a comment |
4
An answer with some really minimal changes and no additional libraries:
documentclass{article}
usepackage{tikz}
%usetikzlibrary{intersections}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw(7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
fill[white] (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
end{document}
An answer with fillbetweewn library (useful in many other cases):
documentclass{article}
usepackage{tikz}
usepackage{pgfplots}
pgfplotsset{compat=1.15}
usepgfplotslibrary{fillbetween}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
path[draw,name path= A](7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
path[draw,name path=B] (7.5,-1.1) ellipse (1 and 1.25);
fill [white,
intersection segments={
of=A and B,
sequence={A1--B1}
}];
end{scope}
end{tikzpicture}
end{document}
Both answers output:
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
add a comment |
4
4
4
An answer with some really minimal changes and no additional libraries:
documentclass{article}
usepackage{tikz}
%usetikzlibrary{intersections}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw(7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
fill[white] (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
end{document}
An answer with fillbetweewn library (useful in many other cases):
documentclass{article}
usepackage{tikz}
usepackage{pgfplots}
pgfplotsset{compat=1.15}
usepgfplotslibrary{fillbetween}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
path[draw,name path= A](7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
path[draw,name path=B] (7.5,-1.1) ellipse (1 and 1.25);
fill [white,
intersection segments={
of=A and B,
sequence={A1--B1}
}];
end{scope}
end{tikzpicture}
end{document}
Both answers output:
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
An answer with some really minimal changes and no additional libraries:
documentclass{article}
usepackage{tikz}
%usetikzlibrary{intersections}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
draw(7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
draw (7.5,-1.1) ellipse (1 and 1.25);
fill[white] (7.5,-1.1) ellipse (1 and 1.25);
end{scope}
end{tikzpicture}
end{document}
An answer with fillbetweewn library (useful in many other cases):
documentclass{article}
usepackage{tikz}
usepackage{pgfplots}
pgfplotsset{compat=1.15}
usepgfplotslibrary{fillbetween}
begin{document}
begin{tikzpicture}
fill[blue] (7.5,0) ellipse (1 and .75);
draw (7.5,0) ellipse (1 and .75);
begin{scope}
clip (7.5,-.9) ellipse (1 and 1.25);
path[draw,name path= A](7.5,1.1) ellipse (1 and 1.25);
clip (7.5,1.1) ellipse (1 and 1.25);
path[draw,name path=B] (7.5,-1.1) ellipse (1 and 1.25);
fill [white,
intersection segments={
of=A and B,
sequence={A1--B1}
}];
end{scope}
end{tikzpicture}
end{document}
Both answers output:
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
edited Mar 24 at 12:38
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
answered Mar 24 at 12:23
koleygrkoleygr
13.4k11039
13.4k11039
add a comment |
add a comment |
8
With even odd rule it is a two-liner. (I would strongly advise against filling some area white because if you use this on top of any background, you will regret it.)
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
draw[fill=blue,even odd rule] (7.5,0) ellipse (1 and .75)
(7,0) arc(120:60:1 and 1.25) arc(-60:-120:1 and 1.25);
draw (7,0) arc(-120:-130:1 and 1.25) (8,0) arc(-60:-50:1 and 1.25);
end{tikzpicture}
end{document}
answered Mar 24 at 12:45
marmotmarmot
114k5145276
add a comment |
8
With even odd rule it is a two-liner. (I would strongly advise against filling some area white because if you use this on top of any background, you will regret it.)
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
draw[fill=blue,even odd rule] (7.5,0) ellipse (1 and .75)
(7,0) arc(120:60:1 and 1.25) arc(-60:-120:1 and 1.25);
draw (7,0) arc(-120:-130:1 and 1.25) (8,0) arc(-60:-50:1 and 1.25);
end{tikzpicture}
end{document}
answered Mar 24 at 12:45
marmotmarmot
114k5145276
add a comment |
8
8
8
With even odd rule it is a two-liner. (I would strongly advise against filling some area white because if you use this on top of any background, you will regret it.)
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
draw[fill=blue,even odd rule] (7.5,0) ellipse (1 and .75)
(7,0) arc(120:60:1 and 1.25) arc(-60:-120:1 and 1.25);
draw (7,0) arc(-120:-130:1 and 1.25) (8,0) arc(-60:-50:1 and 1.25);
end{tikzpicture}
end{document}
answered Mar 24 at 12:45
marmotmarmot
114k5145276
With even odd rule it is a two-liner. (I would strongly advise against filling some area white because if you use this on top of any background, you will regret it.)
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
draw[fill=blue,even odd rule] (7.5,0) ellipse (1 and .75)
(7,0) arc(120:60:1 and 1.25) arc(-60:-120:1 and 1.25);
draw (7,0) arc(-120:-130:1 and 1.25) (8,0) arc(-60:-50:1 and 1.25);
end{tikzpicture}
end{document}
answered Mar 24 at 12:45
marmotmarmot
114k5145276
edited Mar 24 at 13:11
answered Mar 24 at 12:45
marmotmarmot
114k5145276
answered Mar 24 at 12:45
marmotmarmot
114k5145276
answered Mar 24 at 12:45
marmotmarmot
114k5145276
114k5145276
add a comment |
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f481188%2ffilling-the-middle-of-a-torus-in-tikz%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Have you searched this site for tori?
– Benjamin McKay
Mar 24 at 11:46
@BenjaminMcKay Yes, I did. I think I viewed every post about tori here and not a single one solves my problem.
– Gabriel Ribeiro
Mar 24 at 11:46
You can check my (new) answer of the (old) question How to draw a torus.
– Kpym
Mar 31 at 16:31